Sync the Armada-38x device tree files with Linux 4.20-rc5. The changes not taken are new compatible strings for the uart and nand flash controller. The nand binding is best updated if/when the mtd/nand infrastructure is updated.
Signed-off-by: Chris Packham judge.packham@gmail.com Reviewed-by: Stefan Roese sr@denx.de --- I've updated the clearfog and controlcenterdc boards enough for them to compile. In the case of clearfog there are a lot of changes in Linux so it's probably best if the board maintainer looks at what is needed. controlcenterdc isn't in linux so again I've just done enough for compilation.
Changes in v2: - Correct comment for SPI CS1 for clearfog (thanks Baruch)
arch/arm/dts/armada-380.dtsi | 44 +-- arch/arm/dts/armada-385.dtsi | 63 +---- arch/arm/dts/armada-388-clearfog.dts | 25 +- arch/arm/dts/armada-388.dtsi | 43 +-- arch/arm/dts/armada-38x-controlcenterdc.dts | 68 ++--- arch/arm/dts/armada-38x.dtsi | 283 ++++++++++++-------- 6 files changed, 237 insertions(+), 289 deletions(-)
diff --git a/arch/arm/dts/armada-380.dtsi b/arch/arm/dts/armada-380.dtsi index 5102d19cc8f4..cff1269f3fbf 100644 --- a/arch/arm/dts/armada-380.dtsi +++ b/arch/arm/dts/armada-380.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 380 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem alior@marvell.com * Gregory CLEMENT gregory.clement@free-electrons.com * Thomas Petazzoni thomas.petazzoni@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */
#include "armada-38x.dtsi" @@ -71,7 +34,7 @@ }; };
- pcie-controller { + pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -104,6 +67,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -122,6 +86,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -140,6 +105,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; diff --git a/arch/arm/dts/armada-385.dtsi b/arch/arm/dts/armada-385.dtsi index 8e67d2c083dd..f0022d10c715 100644 --- a/arch/arm/dts/armada-385.dtsi +++ b/arch/arm/dts/armada-385.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 385 SoC. * @@ -6,44 +7,6 @@ * Lior Amsalem alior@marvell.com * Gregory CLEMENT gregory.clement@free-electrons.com * Thomas Petazzoni thomas.petazzoni@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */
#include "armada-38x.dtsi" @@ -70,13 +33,7 @@ };
soc { - internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - }; - }; - - pcie-controller { + pciec: pcie { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -106,7 +63,7 @@ * configured in x4 by the bootloader, then * pcie@4,0 is not available. */ - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -115,6 +72,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <0>; @@ -124,7 +82,7 @@ };
/* x1 port */ - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -133,6 +91,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <1>; @@ -142,7 +101,7 @@ };
/* x1 port */ - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -151,6 +110,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <2>; @@ -163,7 +123,7 @@ * x1 port only available when pcie@1,0 is * configured as a x1 port */ - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -172,6 +132,7 @@ #interrupt-cells = <1>; ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; + bus-range = <0x00 0xff>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; marvell,pcie-port = <3>; @@ -182,3 +143,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6820-pinctrl"; +}; diff --git a/arch/arm/dts/armada-388-clearfog.dts b/arch/arm/dts/armada-388-clearfog.dts index 16a47d59e667..a3493ddd4d45 100644 --- a/arch/arm/dts/armada-388-clearfog.dts +++ b/arch/arm/dts/armada-388-clearfog.dts @@ -118,18 +118,7 @@ status = "okay"; };
- spi1: spi@10680 { - /* - * CS0: W25Q32 - * CS1: - * CS2: mikrobus - */ - pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb0: usb3@f8000 { + usb3@f8000 { /* CON7, USB-A port on back of device */ status = "okay"; }; @@ -322,6 +311,18 @@ }; };
+&spi1 { + /* + * Add SPI CS pins for clearfog: + * CS0: W25Q32 + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + /* +#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 MPP18: gpio ? (pca9655 int?) diff --git a/arch/arm/dts/armada-388.dtsi b/arch/arm/dts/armada-388.dtsi index 564fa5937e25..f3a020ff577e 100644 --- a/arch/arm/dts/armada-388.dtsi +++ b/arch/arm/dts/armada-388.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 388 SoC. * @@ -5,39 +6,6 @@ * * Gregory CLEMENT gregory.clement@free-electrons.com * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * - * * The main difference with the Armada 385 is that the 388 can handle two more * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl * property and the name of the SoC, and add the second SATA host which control @@ -50,13 +18,8 @@ model = "Marvell Armada 388 family SoC"; compatible = "marvell,armada388", "marvell,armada385", "marvell,armada380"; - soc { internal-regs { - pinctrl@18000 { - compatible = "marvell,mv88f6828-pinctrl"; - }; - sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; @@ -68,3 +31,7 @@ }; }; }; + +&pinctrl { + compatible = "marvell,mv88f6828-pinctrl"; +}; diff --git a/arch/arm/dts/armada-38x-controlcenterdc.dts b/arch/arm/dts/armada-38x-controlcenterdc.dts index 2cc996876a77..ffbd0dcaae47 100644 --- a/arch/arm/dts/armada-38x-controlcenterdc.dts +++ b/arch/arm/dts/armada-38x-controlcenterdc.dts @@ -72,40 +72,6 @@ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs { - spi0: spi@10600 { - status = "okay"; - sc16is741: sc16is741@0 { - compatible = "nxp,sc16is741"; - reg = <0>; - clocks = <&sc16isclk>; - spi-max-frequency = <4000000>; - interrupt-parent = <&gpio0>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - spi1: spi@10680 { - status = "okay"; - u-boot,dm-pre-reloc; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q016a", "spi-flash"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - spi-flash@1 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a11", "spi-flash"; - reg = <1>; /* Chip select 1 */ - spi-max-frequency = <108000000>; - u-boot,dm-pre-reloc; - }; - }; - I2C0: i2c@11000 { status = "okay"; clock-frequency = <1000000>; @@ -586,3 +552,37 @@ }; }; }; + +&spi0 { + status = "okay"; + sc16is741: sc16is741@0 { + compatible = "nxp,sc16is741"; + reg = <0>; + clocks = <&sc16isclk>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&spi1 { + status = "okay"; + u-boot,dm-pre-reloc; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q016a", "spi-flash"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "spi-flash"; + reg = <1>; /* Chip select 1 */ + spi-max-frequency = <108000000>; + u-boot,dm-pre-reloc; + }; +}; diff --git a/arch/arm/dts/armada-38x.dtsi b/arch/arm/dts/armada-38x.dtsi index 5e5a15855189..72c49beb71a4 100644 --- a/arch/arm/dts/armada-38x.dtsi +++ b/arch/arm/dts/armada-38x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 38x family of SoCs. * @@ -6,44 +7,6 @@ * Lior Amsalem alior@marvell.com * Gregory CLEMENT gregory.clement@free-electrons.com * Thomas Petazzoni thomas.petazzoni@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */
#include "skeleton.dtsi" @@ -83,7 +46,7 @@ reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>; };
- devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -93,7 +56,7 @@ status = "disabled"; };
- devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -103,7 +66,7 @@ status = "disabled"; };
- devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -113,7 +76,7 @@ status = "disabled"; };
- devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -123,7 +86,7 @@ status = "disabled"; };
- devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -145,6 +108,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <0>; + prefetch-data = <1>; };
scu@c000 { @@ -152,6 +119,13 @@ reg = <0xc000 0x58>; };
+ timer@c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0xc200 0x20>; + interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; + clocks = <&coreclk 2>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -168,32 +142,8 @@ <0xc100 0x100>; };
- spi0: spi@10600 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -204,7 +154,7 @@ };
i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -258,19 +208,6 @@ marvell,function = "i2c0"; };
- nand_pins: nand-pins { - marvell,pins = "mpp22", "mpp34", "mpp23", "mpp33", - "mpp38", "mpp28", "mpp40", "mpp42", - "mpp35", "mpp36", "mpp25", "mpp30", - "mpp32"; - marvell,function = "dev"; - }; - - nand_rb: nand-rb { - marvell,pins = "mpp41"; - marvell,function = "nand"; - }; - mdio_pins: mdio-pins { marvell,pins = "mpp4", "mpp5"; marvell,function = "ge"; @@ -298,6 +235,20 @@ marvell,function = "spi1"; };
+ nand_pins: nand-pins { + marvell,pins = "mpp22", "mpp34", "mpp23", + "mpp33", "mpp38", "mpp28", + "mpp40", "mpp42", "mpp35", + "mpp36", "mpp25", "mpp30", + "mpp32"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp41"; + marvell,function = "nand"; + }; + uart0_pins: uart-pins-0 { marvell,pins = "mpp0", "mpp1"; marvell,function = "ua0"; @@ -338,34 +289,42 @@ };
gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18100 0x40>, <0x181c0 0x08>; + reg-names = "gpio", "pwm"; ngpios = <32>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; };
gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; + compatible = "marvell,armada-370-gpio", + "marvell,orion-gpio"; + reg = <0x18140 0x40>, <0x181c8 0x08>; + reg-names = "gpio", "pwm"; ngpios = <28>; gpio-controller; #gpio-cells = <2>; + #pwm-cells = <2>; interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; };
- system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-380-system-controller", "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; @@ -386,7 +345,8 @@
mbusc: mbus-controller@20000 { compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + reg = <0x20000 0x100>, <0x20180 0x20>, + <0x20250 0x8>; };
mpic: interrupt-controller@20a00 { @@ -399,7 +359,7 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; };
- timer@20300 { + timer: timer@20300 { compatible = "marvell,armada-380-timer", "marvell,armada-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; @@ -413,14 +373,14 @@ clock-names = "nbclk", "fixed"; };
- watchdog@20300 { + watchdog: watchdog@20300 { compatible = "marvell,armada-380-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; clocks = <&coreclk 2>, <&refclk>; clock-names = "nbclk", "fixed"; };
- cpurst@20800 { + cpurst: cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; @@ -430,16 +390,37 @@ reg = <0x20d20 0x6c>; };
- coherency-fabric@21010 { + coherencyfab: coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; };
- pmsu@22000 { + pmsu: pmsu@22000 { compatible = "marvell,armada-380-pmsu"; reg = <0x22000 0x1000>; };
+ /* + * As a special exception to the "order by + * register address" rule, the eth0 node is + * placed here to ensure that it gets + * registered as the first interface, since + * the network subsystem doesn't allow naming + * interfaces using DT aliases. Without this, + * the ordering of interfaces is different + * from the one used in U-Boot and the + * labeling of interfaces on the boards, which + * is very confusing for users. + */ + eth0: ethernet@70000 { + compatible = "marvell,armada-370-neta"; + reg = <0x70000 0x4000>; + interrupts-extended = <&mpic 8>; + clocks = <&gateclk 4>; + tx-csum-limit = <9800>; + status = "disabled"; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -456,7 +437,7 @@ status = "disabled"; };
- usb@58000 { + usb0: usb@58000 { compatible = "marvell,orion-ehci"; reg = <0x58000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -464,8 +445,8 @@ status = "disabled"; };
- xor@60800 { - compatible = "marvell,orion-xor"; + xor0: xor@60800 { + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; clocks = <&gateclk 22>; @@ -484,8 +465,8 @@ }; };
- xor@60900 { - compatible = "marvell,orion-xor"; + xor1: xor@60900 { + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; clocks = <&gateclk 28>; @@ -504,14 +485,6 @@ }; };
- eth0: ethernet@70000 { - compatible = "marvell,armada-370-neta"; - reg = <0x70000 0x4000>; - interrupts-extended = <&mpic 8>; - clocks = <&gateclk 4>; - status = "disabled"; - }; - mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; @@ -520,14 +493,29 @@ clocks = <&gateclk 4>; };
- rtc@a3800 { + cesa: crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + + rtc: rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; reg-names = "rtc", "rtc-soc"; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; };
- sata@a8000 { + ahci0: sata@a8000 { compatible = "marvell,armada-380-ahci"; reg = <0xa8000 0x2000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -535,7 +523,15 @@ status = "disabled"; };
- sata@e0000 { + bm: bm@c8000 { + compatible = "marvell,armada-380-neta-bm"; + reg = <0xc8000 0xac>; + clocks = <&gateclk 13>; + internal-mem = <&bm_bppi>; + status = "disabled"; + }; + + ahci1: sata@e0000 { compatible = "marvell,armada-380-ahci"; reg = <0xe0000 0x2000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; @@ -551,23 +547,23 @@ clock-output-names = "nand"; };
- thermal@e8078 { + thermal: thermal@e8078 { compatible = "marvell,armada380-thermal"; - reg = <0xe4078 0x4>, <0xe4074 0x4>; + reg = <0xe4078 0x4>, <0xe4070 0x8>; status = "okay"; };
- flash@d0000 { + nand_controller: nand-controller@d0000 { compatible = "marvell,armada370-nand","marvell,mvebu-pxa3xx-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&coredivclk 0>; status = "disabled"; };
- sdhci@d8000 { + sdhci: sdhci@d8000 { compatible = "marvell,armada-380-sdhci"; reg-names = "sdhci", "mbus", "conf-sdio3"; reg = <0xd8000 0x1000>, @@ -579,7 +575,7 @@ status = "disabled"; };
- usb3@f0000 { + usb3_0: usb3@f0000 { compatible = "marvell,armada-380-xhci"; reg = <0xf0000 0x4000>,<0xf4000 0x4000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -587,7 +583,7 @@ status = "disabled"; };
- usb3@f8000 { + usb3_1: usb3@f8000 { compatible = "marvell,armada-380-xhci"; reg = <0xf8000 0x4000>,<0xfc000 0x4000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; @@ -595,10 +591,63 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x19) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x15) 0 0x800>; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; + + bm_bppi: bm-bppi { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>; + ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gateclk 13>; + no-memory-wc; + status = "disabled"; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coreclk 0>; + status = "disabled"; + }; };
clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>;