Hi Ramon,
On 22.08.19 13:15, Ramon Fried wrote:
On August 22, 2019 12:38:08 PM GMT+03:00, Stefan Roese stefan.roese@gmail.com wrote:
Hi Ramon,
On 14.07.19 17:25, Ramon Fried wrote:
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure. RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification.
Signed-off-by: Ramon Fried rfried.dev@gmail.com
This patch breaks ethernet on my AT91SAM9G25 based board. With this patch now, tftp does not complete the xfer any more:
=> tftp 21000000 big ethernet@f802c000: PHY present at 1 ethernet@f802c000: Starting autonegotiation... ethernet@f802c000: Autonegotiation complete ethernet@f802c000: link up, 100Mbps full-duplex (lpa: 0xc5e1) Using ethernet@f802c000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.249 Filename 'big'. Load address: 0x21000000 Loading: #T T
With this patch reverted (as well as with v2019.07), tftp works just fine.
I did not look into the patch yet. Perhaps you have a quick idea on why this breaks my platform.
BTW: When I disable the dcache (dcache off), tftp also works fine with this patch. So its definitely something cache / dma related.
Thanks for letting me know, I'll be next to a PC tomorrow, I'll look into it.
I did look into this patch a bit and did not find any functional change for the non-GEM part I'm using. Hopefully I'll find some more time tomorrow to dig into this. If you spot something meanwhile, then even better. ;)
Thanks, Stefan