From: Aaron Williams awilliams@marvell.com
Import cvmx-helper-rgmii.c from 2013 U-Boot. It will be used by the later added drivers to support networking on the MIPS Octeon II / III platforms.
Signed-off-by: Aaron Williams awilliams@marvell.com Signed-off-by: Stefan Roese sr@denx.de --- arch/mips/mach-octeon/cvmx-helper-rgmii.c | 431 ++++++++++++++++++++++ 1 file changed, 431 insertions(+) create mode 100644 arch/mips/mach-octeon/cvmx-helper-rgmii.c
diff --git a/arch/mips/mach-octeon/cvmx-helper-rgmii.c b/arch/mips/mach-octeon/cvmx-helper-rgmii.c new file mode 100644 index 000000000000..a85b6a3cd4e8 --- /dev/null +++ b/arch/mips/mach-octeon/cvmx-helper-rgmii.c @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2022 Marvell International Ltd. + * + * Functions for RGMII/GMII/MII initialization, configuration, + * and monitoring. + */ + +#include <log.h> +#include <time.h> +#include <linux/delay.h> + +#include <mach/cvmx-regs.h> +#include <mach/cvmx-csr.h> +#include <mach/cvmx-bootmem.h> +#include <mach/octeon-model.h> +#include <mach/cvmx-fuse.h> +#include <mach/octeon-feature.h> +#include <mach/cvmx-qlm.h> +#include <mach/octeon_qlm.h> +#include <mach/cvmx-pcie.h> +#include <mach/cvmx-coremask.h> +#include <mach/cvmx-helper.h> +#include <mach/cvmx-helper-board.h> + +#include <mach/cvmx-hwpko.h> + +#include <mach/cvmx-asxx-defs.h> +#include <mach/cvmx-dbg-defs.h> +#include <mach/cvmx-gmxx-defs.h> +#include <mach/cvmx-npi-defs.h> +#include <mach/cvmx-pko-defs.h> + +/** + * @INTERNAL + * Probe RGMII ports and determine the number present + * + * @param xiface Interface to probe + * + * @return Number of RGMII/GMII/MII ports (0-4). + */ +int __cvmx_helper_rgmii_probe(int xiface) +{ + struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); + int num_ports = 0; + union cvmx_gmxx_inf_mode mode; + + mode.u64 = csr_rd(CVMX_GMXX_INF_MODE(xi.interface)); + + if (mode.s.type) + debug("ERROR: Unsupported Octeon model in %s\n", __func__); + else + debug("ERROR: Unsupported Octeon model in %s\n", __func__); + return num_ports; +} + +/** + * Put an RGMII interface in loopback mode. Internal packets sent + * out will be received back again on the same port. Externally + * received packets will echo back out. + * + * @param port IPD port number to loop. + */ +void cvmx_helper_rgmii_internal_loopback(int port) +{ + int interface = (port >> 4) & 1; + int index = port & 0xf; + u64 tmp; + + union cvmx_gmxx_prtx_cfg gmx_cfg; + + gmx_cfg.u64 = 0; + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + csr_wr(CVMX_GMXX_TXX_CLK(index, interface), 1); + csr_wr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + csr_wr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + tmp = csr_rd(CVMX_ASXX_PRT_LOOP(interface)); + csr_wr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp); + tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface)); + csr_wr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp); + tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface)); + csr_wr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp); + gmx_cfg.s.en = 1; + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); +} + +/** + * @INTERNAL + * Configure all of the ASX, GMX, and PKO regsiters required + * to get RGMII to function on the supplied interface. + * + * @param xiface PKO Interface to configure (0 or 1) + * + * @return Zero on success + */ +int __cvmx_helper_rgmii_enable(int xiface) +{ + struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface); + int interface = xi.interface; + int num_ports = cvmx_helper_ports_on_interface(interface); + int port; + union cvmx_gmxx_inf_mode mode; + union cvmx_asxx_tx_prt_en asx_tx; + union cvmx_asxx_rx_prt_en asx_rx; + + mode.u64 = csr_rd(CVMX_GMXX_INF_MODE(interface)); + + if (num_ports == -1) + return -1; + if (mode.s.en == 0) + return -1; + + /* Configure the ASX registers needed to use the RGMII ports */ + asx_tx.u64 = 0; + asx_tx.s.prt_en = cvmx_build_mask(num_ports); + csr_wr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64); + + asx_rx.u64 = 0; + asx_rx.s.prt_en = cvmx_build_mask(num_ports); + csr_wr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64); + + /* Configure the GMX registers needed to use the RGMII ports */ + for (port = 0; port < num_ports; port++) { + /* + * Configure more flexible RGMII preamble + * checking. Pass 1 doesn't support this feature. + */ + union cvmx_gmxx_rxx_frm_ctl frm_ctl; + + frm_ctl.u64 = csr_rd(CVMX_GMXX_RXX_FRM_CTL(port, interface)); + /* New field, so must be compile time */ + frm_ctl.s.pre_free = 1; + csr_wr(CVMX_GMXX_RXX_FRM_CTL(port, interface), frm_ctl.u64); + + /* + * Each pause frame transmitted will ask for about 10M + * bit times before resume. If buffer space comes + * available before that time has expired, an XON + * pause frame (0 time) will be transmitted to restart + * the flow. + */ + csr_wr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface), 20000); + csr_wr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL(port, interface), + 19000); + + csr_wr(CVMX_ASXX_TX_CLK_SETX(port, interface), 24); + csr_wr(CVMX_ASXX_RX_CLK_SETX(port, interface), 24); + } + + __cvmx_helper_setup_gmx(interface, num_ports); + + /* enable the ports now */ + for (port = 0; port < num_ports; port++) { + union cvmx_gmxx_prtx_cfg gmx_cfg; + + cvmx_helper_link_autoconf( + cvmx_helper_get_ipd_port(interface, port)); + gmx_cfg.u64 = csr_rd(CVMX_GMXX_PRTX_CFG(port, interface)); + gmx_cfg.s.en = 1; + csr_wr(CVMX_GMXX_PRTX_CFG(port, interface), gmx_cfg.u64); + } + return 0; +} + +/** + * @INTERNAL + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @param ipd_port IPD/PKO port to query + * + * @return Link state + */ +cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_asxx_prt_loop asxx_prt_loop; + + asxx_prt_loop.u64 = csr_rd(CVMX_ASXX_PRT_LOOP(interface)); + if (asxx_prt_loop.s.int_loop & (1 << index)) { + /* Force 1Gbps full duplex on internal loopback */ + cvmx_helper_link_info_t result; + + result.u64 = 0; + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + return result; + } else { + return __cvmx_helper_board_link_get(ipd_port); + } +} + +/** + * @INTERNAL + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @param ipd_port IPD/PKO port to query + * + * @return Link state + */ +cvmx_helper_link_info_t __cvmx_helper_gmii_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index == 0) { + result = __cvmx_helper_rgmii_link_get(ipd_port); + } else { + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + } + + return result; +} + +/** + * @INTERNAL + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). It is normally best to use + * cvmx_helper_link_autoconf() instead. + * + * @param ipd_port IPD/PKO port to configure + * @param link_info The new link state + * + * @return Zero on success, negative on failure + */ +int __cvmx_helper_rgmii_link_set(int ipd_port, + cvmx_helper_link_info_t link_info) +{ + int result = 0; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_gmxx_prtx_cfg original_gmx_cfg; + union cvmx_gmxx_prtx_cfg new_gmx_cfg; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos_save[16]; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp_save; + int i; + + /* Read the current settings so we know the current enable state */ + original_gmx_cfg.u64 = csr_rd(CVMX_GMXX_PRTX_CFG(index, interface)); + new_gmx_cfg = original_gmx_cfg; + + /* Disable the lowest level RX */ + csr_wr(CVMX_ASXX_RX_PRT_EN(interface), + csr_rd(CVMX_ASXX_RX_PRT_EN(interface)) & ~(1 << index)); + + memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save)); + /* Disable all queues so that TX should become idle */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + + csr_wr(CVMX_PKO_REG_READ_IDX, queue); + pko_mem_queue_qos.u64 = csr_rd(CVMX_PKO_MEM_QUEUE_QOS); + pko_mem_queue_qos.s.pid = ipd_port; + pko_mem_queue_qos.s.qid = queue; + pko_mem_queue_qos_save[i] = pko_mem_queue_qos; + pko_mem_queue_qos.s.qos_mask = 0; + csr_wr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64); + } + + /* Disable backpressure */ + gmx_tx_ovr_bp.u64 = csr_rd(CVMX_GMXX_TX_OVR_BP(interface)); + gmx_tx_ovr_bp_save = gmx_tx_ovr_bp; + gmx_tx_ovr_bp.s.bp &= ~(1 << index); + gmx_tx_ovr_bp.s.en |= 1 << index; + csr_wr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64); + csr_rd(CVMX_GMXX_TX_OVR_BP(interface)); + + /* + * Poll the GMX state machine waiting for it to become + * idle. Preferably we should only change speed when it is + * idle. If it doesn't become idle we will still do the speed + * change, but there is a slight chance that GMX will + * lockup. + */ + csr_wr(CVMX_NPI_DBG_SELECT, interface * 0x800 + index * 0x100 + 0x880); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, cvmx_dbg_data_t, data & 7, ==, 0, + 10000); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, cvmx_dbg_data_t, data & 0xf, ==, 0, + 10000); + + /* Disable the port before we make any changes */ + new_gmx_cfg.s.en = 0; + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + csr_rd(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Set full/half duplex */ + if (!link_info.s.link_up) + /* Force full duplex on down links */ + new_gmx_cfg.s.duplex = 1; + else + new_gmx_cfg.s.duplex = link_info.s.full_duplex; + + /* Set the link speed. Anything unknown is set to 1Gbps */ + if (link_info.s.speed == 10) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else if (link_info.s.speed == 100) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else { + new_gmx_cfg.s.slottime = 1; + new_gmx_cfg.s.speed = 1; + } + + /* Adjust the clocks */ + if (link_info.s.speed == 10) { + csr_wr(CVMX_GMXX_TXX_CLK(index, interface), 50); + csr_wr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + csr_wr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else if (link_info.s.speed == 100) { + csr_wr(CVMX_GMXX_TXX_CLK(index, interface), 5); + csr_wr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + csr_wr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else { + csr_wr(CVMX_GMXX_TXX_CLK(index, interface), 1); + csr_wr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + csr_wr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + + /* Do a read to make sure all setup stuff is complete */ + csr_rd(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Save the new GMX setting without enabling the port */ + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + /* Enable the lowest level RX */ + if (link_info.s.link_up) + csr_wr(CVMX_ASXX_RX_PRT_EN(interface), + csr_rd(CVMX_ASXX_RX_PRT_EN(interface)) | (1 << index)); + + /* Re-enable the TX path */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + + csr_wr(CVMX_PKO_REG_READ_IDX, queue); + csr_wr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos_save[i].u64); + } + + /* Restore backpressure */ + csr_wr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp_save.u64); + + /* Restore the GMX enable state. Port config is complete */ + new_gmx_cfg.s.en = original_gmx_cfg.s.en; + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + return result; +} + +/** + * @INTERNAL + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @param ipd_port IPD/PKO port to loopback. + * @param enable_internal + * Non zero if you want internal loopback + * @param enable_external + * Non zero if you want external loopback + * + * @return Zero on success, negative on failure. + */ +int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + int original_enable; + union cvmx_gmxx_prtx_cfg gmx_cfg; + union cvmx_asxx_prt_loop asxx_prt_loop; + + /* Read the current enable state and save it */ + gmx_cfg.u64 = csr_rd(CVMX_GMXX_PRTX_CFG(index, interface)); + original_enable = gmx_cfg.s.en; + /* Force port to be disabled */ + gmx_cfg.s.en = 0; + if (enable_internal) { + /* Force speed if we're doing internal loopback */ + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + csr_wr(CVMX_GMXX_TXX_CLK(index, interface), 1); + csr_wr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + csr_wr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + + /* Set the loopback bits */ + asxx_prt_loop.u64 = csr_rd(CVMX_ASXX_PRT_LOOP(interface)); + if (enable_internal) + asxx_prt_loop.s.int_loop |= 1 << index; + else + asxx_prt_loop.s.int_loop &= ~(1 << index); + if (enable_external) + asxx_prt_loop.s.ext_loop |= 1 << index; + else + asxx_prt_loop.s.ext_loop &= ~(1 << index); + csr_wr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64); + + /* Force enables in internal loopback */ + if (enable_internal) { + u64 tmp; + + tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface)); + csr_wr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp); + tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface)); + csr_wr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp); + original_enable = 1; + } + + /* Restore the enable state */ + gmx_cfg.s.en = original_enable; + csr_wr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + return 0; +}