Hello,
This is my first time using U-boot and I have what I am sure is a newbie question. However, I am getting an error while attempting to access the archives at SourceForge, so I'll go ahead and post the following.
1. On my Chameleon 405EP board, it appears the Ethernet interface is off by default. While the board is running Linux, the Ethernet interface is *not* brought up by default -- rather, I must type 'ifconfig eth0 up'. This seems strange, but I can live with it. While the board is running U-boot, on the other hand, there does not appear to be a 'bring up Ethernet' command. I have MAC address and IP address set in environment variables, so what else do I need to do to get the board to answer a ping???
2. Probably the same as the first question -- assigning a static IP address. In our lab, we do not use DHCP; addresses are statically assigned. Is setenv ipaddr {n.n.n.n} sufficient? If not, what else do I need to do?
3. Is this standard U-boot behavior, or is it peculiar to the Chameleon board? On the boards we manufacture (and in our firmware), Ethernet comes up by default.
Thanks.