
HI,
On 4/4/20 6:36 AM, sinan@writeme.com wrote:
From: Sinan Akman sinan@writeme.com
I'm not sure but its subject is strange. It's not only the converting to DM_MMC. you're adding mpc8397.dtb device-tree. I think you don't add device-tree for only mmc.
It's better to separate patches. "Add devicetree...", " Convert to DM_MMC". It's just my opinion.
Best Regards, Jaehoon Chung
Signed-off-by: Sinan Akman sinan@writeme.com Cc: mario.six@gdsys.cc
arch/powerpc/dts/Makefile | 1 + arch/powerpc/dts/mpc8379erdb.dts | 239 ++++++++++++++++++++++++++++++ board/freescale/mpc837xerdb/mpc837xerdb.c | 9 +- configs/MPC837XERDB_defconfig | 5 +- 4 files changed, 252 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/dts/mpc8379erdb.dts
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index 3195351c9c..e3ec033096 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_TARGET_MPC837XERDB) += mpc8379erdb.dtb dtb-$(CONFIG_TARGET_MPC8548CDS) += mpc8548cds.dtb mpc8548cds_36b.dtb dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb diff --git a/arch/powerpc/dts/mpc8379erdb.dts b/arch/powerpc/dts/mpc8379erdb.dts new file mode 100644 index 0000000000..33afaf9a94 --- /dev/null +++ b/arch/powerpc/dts/mpc8379erdb.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/*
- MPC8379E RDB Device Tree Source
- Copyright 2020 NXP
- */
+/dts-v1/;
+/ {
- compatible = "fsl,mpc8379erdb";
- #address-cells = <1>;
- #size-cells = <1>;
- aliases {
serial0 = &serial0;
serial1 = &serial1;
- };
- cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8379@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
- };
- memory {
device_type = "memory";
reg = <0x00000000 0x10000000>; // 256MB at 0
- };
- localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
- };
- immr@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <0x200 0x100>;
};
gpio0: gpio@c00 {
#gpio-cells = <2>;
device_type = "gpio";
compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x18>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
device_type = "gpio";
compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <15 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
spi@7000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,spi";
reg = <0x7000 0x1000>;
interrupts = <16 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
};
sdhc@2e000 {
compatible = "fsl,esdhc";
reg = <0x2e000 0x1000>;
bus-width = <0x4>;
clock-frequency = <0>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
ipic: interrupt-controller@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
device_type = "ipic";
};
pmc: power@b00 {
compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
phy_type = "ulpi";
sleep = <&pmc 0x00c00000>;
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x24000 0x1000>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar", "fsl,tsec";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
phy-handle = < &phy2 >;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar", "fsl,tsec";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
- };
+}; diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 45038acf32..9321952674 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -136,8 +136,8 @@ int checkboard(void)
int board_early_init_f(void) { -#ifdef CONFIG_FSL_SERDES immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; +#ifdef CONFIG_FSL_SERDES u32 spridr = in_be32(&immr->sysconf.spridr);
/* we check only part num, and don't look for CPU revisions */ @@ -164,10 +164,16 @@ int board_early_init_f(void) break; } #endif /* CONFIG_FSL_SERDES */
+#ifdef CONFIG_FSL_ESDHC
- clrsetbits_be32(&immr->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
- clrsetbits_be32(&immr->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD);
+#endif return 0; }
#ifdef CONFIG_FSL_ESDHC +#if !(CONFIG_IS_ENABLED(DM_MMC)) int board_mmc_init(bd_t *bd) { struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR; @@ -186,6 +192,7 @@ int board_mmc_init(bd_t *bd) return fsl_esdhc_mmc_init(bd); } #endif +#endif
/*
- Miscellaneous late-boot configurations
diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index fd8335ee4e..8ef193a6e5 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -160,7 +160,11 @@ CONFIG_CMD_PING=y CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="mpc8379erdb" CONFIG_ENV_ADDR=0xFE080000 +CONFIG_DM=y +CONFIG_DM_MMC=y CONFIG_FSL_SATA=y CONFIG_FSL_ESDHC=y CONFIG_MTD_NOR_FLASH=y @@ -174,4 +178,3 @@ CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
2.14.5