Hi, Juergen
I can confirm that this patch fixes the problem with CTRC-C on my I.MX31ADS evaluation board. I can now abort operations that previously required system reset.
I hope this patch will be applied before release of 1.3.4
Thanks a lot.
Felix.
Juergen Kilb wrote:
The Register URXD contains status information in bits [15..8]. With status bit 15 set, CTRL-C was reported as 0x8003 instead of 0x03. Therefore CTRL-C was not detected. To solve this, bits [15..8] were masked out now.
Signed-off-by: Juergen Kilb J.Kilb@gmx.de
cpu/arm1136/mx31/serial.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/cpu/arm1136/mx31/serial.c b/cpu/arm1136/mx31/serial.c index 1cad8f9..f498599 100644 --- a/cpu/arm1136/mx31/serial.c +++ b/cpu/arm1136/mx31/serial.c @@ -63,6 +63,7 @@ #define URXD_FRMERR (1<<12) #define URXD_BRK (1<<11) #define URXD_PRERR (1<<10) +#define URXD_RX_DATA (0xFF) #define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ #define UCR1_ADBR (1<<14) /* Auto detect baud rate */ #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ @@ -165,7 +166,7 @@ void serial_setbrg (void) int serial_getc (void) { while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
- return __REG(UART_PHYS + URXD);
- return (__REG(UART_PHYS + URXD) & URXD_RX_DATA); /* mask out status from
upper word */ }
void serial_putc (const char c)
1.5.5.1
Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users