This converts the following to Kconfig: CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END
This is removing unused defines and correcting the default value to be 0x0 as we are a hex symbol.
Signed-off-by: Tom Rini trini@konsulko.com --- cmd/Kconfig | 2 +- include/configs/imx8mm_beacon.h | 3 --- include/configs/imx8mm_icore_mx8mm.h | 7 ------- include/configs/imx8mq_phanbell.h | 4 ---- include/configs/kontron_sl28.h | 4 ---- include/configs/pico-imx8mq.h | 4 ---- include/configs/synquacer.h | 3 --- 7 files changed, 1 insertion(+), 26 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig index fd8f0227c891..7747ab50a042 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -741,7 +741,7 @@ endif
config SYS_MEMTEST_START hex "default start address for mtest" - default 0 + default 0x0 help This is the default start address for mtest for simple read/write test. If no arguments are given to mtest, default address is used diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 1040a6897b79..77f062474dd6 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -91,9 +91,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */ diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index fe997f9d1851..d75fcf747e41 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -28,9 +28,6 @@ # define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ @@ -69,10 +66,6 @@ #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */ #define CONFIG_SYS_BOOTM_LEN SZ_256M
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - /* UART */ #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 7afdfd6efe88..1668ca8acf3e 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -116,10 +116,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
/* Monitor Command Prompt */ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 4152851ba414..84dd818aa9c8 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -30,10 +30,6 @@ /* early stack pointer */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0)
-/* memtest command */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x9fffffff - /* SMP */ #define CPU_RELEASE_ADDR secondary_boot_addr
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 716f1327c321..2293a2919e28 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -95,10 +95,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
/* Monitor Command Prompt */ diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 3d099b4f11f7..2347ec2fe0cf 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -41,9 +41,6 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) - #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 128 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)