Hi Guys,
I have just built a u-boot.bin for rpi_3_32b_defconfig using all the defaults. I then used this on the new Raspbian Buster image that was released a few days ago i.e. 2019-06-20-raspbian-buster-lite.zip.
This same u-boot.bin works fine on the old Raspbian Stretch version ( 2019-04-08-raspbian-stretch.zip).
Booting the RPI with Raspbian Buser gives the following error:
U-Boot 2019.07-rc4-00287-g5eea874b5e-dirty (Jun 27 2019 - 22:00:42 +0000)
DRAM: 948 MiB
RPI 3 Model B (0xa02082)
MMC: mmc@7e202000: 0, sdhci@7e300000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00] CACHE: Misaligned operation at range [3b3da9e8, 3b3daa00]
Any help would be greatly appreciated!
Thanks for your time. Elliot