Introduce script to generate fit image for i.MX8M
Signed-off-by: Peng Fan peng.fan@nxp.com ---
V2: replace bl31.bin with $BL31 replace bl32.bin with $BL32
arch/arm/mach-imx/mkimage_fit_atf.sh | 137 +++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100755 arch/arm/mach-imx/mkimage_fit_atf.sh
diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh new file mode 100755 index 0000000000..77f7143263 --- /dev/null +++ b/arch/arm/mach-imx/mkimage_fit_atf.sh @@ -0,0 +1,137 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0+ +# +# script to generate FIT image source for i.MX8MQ boards with +# ARM Trusted Firmware and multiple device trees (given on the command line) +# +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...] + +[ -z "$BL31" ] && BL31="bl31.bin" +[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000" +[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000" + +if [ ! -f $BL31 ]; then + echo "ERROR: BL31 file $BL31 NOT found" >&2 + exit 0 +else + echo "$BL31 size: " >&2 + ls -lct $BL31 | awk '{print $5}' >&2 +fi + +BL32="tee.bin" + +if [ ! -f $BL32 ]; then + BL32=/dev/null +else + echo "Building with TEE support, make sure your $BL31 is compiled with spd. If you do not want tee, please delete $BL31" >&2 + echo "$BL32 size: " >&2 + ls -lct $BL32 | awk '{print $5}' >&2 +fi + +BL33="u-boot-nodtb.bin" + +if [ ! -f $BL33 ]; then + echo "ERROR: $BL33 file NOT found" >&2 + exit 0 +else + echo "u-boot-nodtb.bin size: " >&2 + ls -lct u-boot-nodtb.bin | awk '{print $5}' >&2 +fi + +for dtname in $* +do + echo "$dtname size: " >&2 + ls -lct $dtname | awk '{print $5}' >&2 +done + + +cat << __HEADER_EOF +/dts-v1/; + +/ { + description = "Configuration to load ATF before U-Boot"; + + images { + uboot@1 { + description = "U-Boot (64-bit)"; + data = /incbin/("$BL33"); + type = "standalone"; + arch = "arm64"; + compression = "none"; + load = <0x40200000>; + }; + atf@1 { + description = "ARM Trusted Firmware"; + data = /incbin/("$BL31"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <$ATF_LOAD_ADDR>; + entry = <$ATF_LOAD_ADDR>; + }; +__HEADER_EOF + +if [ -f $BL32 ]; then +cat << __HEADER_EOF + tee@1 { + description = "TEE firmware"; + data = /incbin/("$BL32"); + type = "firmware"; + arch = "arm64"; + compression = "none"; + load = <$TEE_LOAD_ADDR>; + entry = <$TEE_LOAD_ADDR>; + }; +__HEADER_EOF +fi + +cnt=1 +for dtname in $* +do + cat << __FDT_IMAGE_EOF + fdt@$cnt { + description = "$(basename $dtname .dtb)"; + data = /incbin/("$dtname"); + type = "flat_dt"; + compression = "none"; + }; +__FDT_IMAGE_EOF +cnt=$((cnt+1)) +done + +cat << __CONF_HEADER_EOF + }; + configurations { + default = "config@1"; + +__CONF_HEADER_EOF + +cnt=1 +for dtname in $* +do +if [ -f $BL32 ]; then +cat << __CONF_SECTION_EOF + config@$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot@1"; + loadables = "atf@1", "tee@1"; + fdt = "fdt@$cnt"; + }; +__CONF_SECTION_EOF +else +cat << __CONF_SECTION1_EOF + config@$cnt { + description = "$(basename $dtname .dtb)"; + firmware = "uboot@1"; + loadables = "atf@1"; + fdt = "fdt@$cnt"; + }; +__CONF_SECTION1_EOF +fi +cnt=$((cnt+1)) +done + +cat << __ITS_EOF + }; +}; +__ITS_EOF