The indirect read code is a pile of nastiness. This patch replaces the whole unmaintainable indirect read implementation with the one from upcoming Linux CQSPI driver, which went through multiple rounds of thorough review and testing. All the patch does is it plucks out duplicate ad-hoc code distributed across the driver and replaces it with more compact code doing exactly the same thing. There is no speed change of the read operation.
Signed-off-by: Marek Vasut marex@denx.de Cc: Anatolij Gustschin agust@denx.de Cc: Chin Liang See clsee@altera.com Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Jagan Teki jteki@openedev.com Cc: Pavel Machek pavel@denx.de Cc: Stefan Roese sr@denx.de Cc: Vignesh R vigneshr@ti.com --- drivers/spi/cadence_qspi_apb.c | 124 ++++++++++++++++++----------------------- 1 file changed, 53 insertions(+), 71 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index 00a50cb..ac47c6f 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -193,64 +193,6 @@ static unsigned int cadence_qspi_apb_cmd2addr(const unsigned char *addr_buf, return addr; }
-static void cadence_qspi_apb_read_fifo_data(void *dest, - const void *src_ahb_addr, unsigned int bytes) -{ - unsigned int temp; - int remaining = bytes; - unsigned int *dest_ptr = (unsigned int *)dest; - unsigned int *src_ptr = (unsigned int *)src_ahb_addr; - - while (remaining >= sizeof(dest_ptr)) { - *dest_ptr = readl(src_ptr); - remaining -= sizeof(src_ptr); - dest_ptr++; - } - if (remaining) { - /* dangling bytes */ - temp = readl(src_ptr); - memcpy(dest_ptr, &temp, remaining); - } - - return; -} - -/* Read from SRAM FIFO with polling SRAM fill level. */ -static int qspi_read_sram_fifo_poll(const void *reg_base, void *dest_addr, - const void *src_addr, unsigned int num_bytes) -{ - unsigned int remaining = num_bytes; - unsigned int retry; - unsigned int sram_level = 0; - unsigned char *dest = (unsigned char *)dest_addr; - - while (remaining > 0) { - retry = CQSPI_REG_RETRY; - while (retry--) { - sram_level = CQSPI_GET_RD_SRAM_LEVEL(reg_base); - if (sram_level) - break; - udelay(1); - } - - if (!retry) { - printf("QSPI: No receive data after polling for %d times\n", - CQSPI_REG_RETRY); - return -1; - } - - sram_level *= CQSPI_FIFO_WIDTH; - sram_level = sram_level > remaining ? remaining : sram_level; - - /* Read data from FIFO. */ - cadence_qspi_apb_read_fifo_data(dest, src_addr, sram_level); - dest += sram_level; - remaining -= sram_level; - udelay(1); - } - return 0; -} - void cadence_qspi_apb_controller_enable(void *reg_base) { unsigned int reg; @@ -679,40 +621,80 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, return 0; }
+static u32 cadence_qspi_get_rd_sram_level(struct cadence_spi_platdata *plat) +{ + u32 reg = readl(plat->regbase + CQSPI_REG_SDRAMLEVEL); + reg >>= CQSPI_REG_SDRAMLEVEL_RD_LSB; + return reg & CQSPI_REG_SDRAMLEVEL_RD_MASK; +} + +static int cadence_qspi_wait_for_data(struct cadence_spi_platdata *plat) +{ + unsigned int timeout = 10000; + u32 reg; + + while (timeout--) { + reg = cadence_qspi_get_rd_sram_level(plat); + if (reg) + return reg; + udelay(1); + } + + return -ETIMEDOUT; +} + int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat, - unsigned int rxlen, u8 *rxbuf) + unsigned int n_rx, u8 *rxbuf) { - unsigned int reg; + unsigned int remaining = n_rx; + unsigned int bytes_to_read = 0; + int ret;
- writel(rxlen, plat->regbase + CQSPI_REG_INDIRECTRDBYTES); + writel(n_rx, plat->regbase + CQSPI_REG_INDIRECTRDBYTES);
/* Start the indirect read transfer */ writel(CQSPI_REG_INDIRECTRD_START_MASK, plat->regbase + CQSPI_REG_INDIRECTRD);
- if (qspi_read_sram_fifo_poll(plat->regbase, (void *)rxbuf, - (const void *)plat->ahbbase, rxlen)) - goto failrd; + while (remaining > 0) { + ret = cadence_qspi_wait_for_data(plat); + if (ret < 0) { + printf("Indirect write timed out (%i)\n", ret); + goto failrd; + }
- /* Check flash indirect controller */ - reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD); - if (!(reg & CQSPI_REG_INDIRECTRD_DONE_MASK)) { - reg = readl(plat->regbase + CQSPI_REG_INDIRECTRD); - printf("QSPI: indirect completion status error with reg 0x%08x\n", - reg); + bytes_to_read = ret; + + while (bytes_to_read != 0) { + bytes_to_read *= CQSPI_FIFO_WIDTH; + bytes_to_read = bytes_to_read > remaining ? + remaining : bytes_to_read; + readsl(plat->ahbbase, rxbuf, DIV_ROUND_UP(bytes_to_read, 4)); + rxbuf += bytes_to_read; + remaining -= bytes_to_read; + bytes_to_read = cadence_qspi_get_rd_sram_level(plat); + } + } + + /* Check indirect done status */ + ret = wait_for_bit("QSPI", plat->regbase + CQSPI_REG_INDIRECTRD, + CQSPI_REG_INDIRECTRD_DONE_MASK, 1, 10, 0); + if (ret) { + printf("Indirect read completion error (%i)\n", ret); goto failrd; }
/* Clear indirect completion status */ writel(CQSPI_REG_INDIRECTRD_DONE_MASK, plat->regbase + CQSPI_REG_INDIRECTRD); + return 0;
failrd: /* Cancel the indirect read */ writel(CQSPI_REG_INDIRECTRD_CANCEL_MASK, plat->regbase + CQSPI_REG_INDIRECTRD); - return -1; + return ret; }
/* Opcode + Address (3/4 bytes) */