Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham judge.packham@gmail.com ---
.../arm/dts/kirkwood-guruplug-server-plus.dts | 133 ++++++++++++++++++ configs/guruplug_defconfig | 3 +- 2 files changed, 135 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/kirkwood-guruplug-server-plus.dts
diff --git a/arch/arm/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/dts/kirkwood-guruplug-server-plus.dts new file mode 100644 index 000000000000..ff1260ee3fe8 --- /dev/null +++ b/arch/arm/dts/kirkwood-guruplug-server-plus.dts @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Globalscale Technologies Guruplug Server Plus"; + compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_led_health_r: pmx-led-health-r { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_health_g: pmx-led-health-g { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wmode_r: pmx-led-wmode-r { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wmode_g: pmx-led-wmode-g { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + + /* AzureWave AW-GH381 WiFi/BT */ + mvsdio@90000 { + status = "okay"; + non-removable; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g + &pmx_led_wmode_r &pmx_led_wmode_g >; + pinctrl-names = "default"; + + health-r { + label = "guruplug:red:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + health-g { + label = "guruplug:green:health"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + wmode-r { + label = "guruplug:red:wmode"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + wmode-g { + label = "guruplug:green:wmode"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x00100000 0x00400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x00500000 0x1fb00000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index c4889910687f..66c34fcc34bc 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_GURUPLUG=y CONFIG_IDENT_STRING="\nMarvell-GuruPlug" +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus" CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -24,6 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:896K(uboot),128K(uboot_env),-@1M(root)" CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y +CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set @@ -32,4 +34,3 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y -CONFIG_OF_LIBFDT=y