Dear smitha.vanga@wipro.com,
In message 07ACDFB8ECA8EF47863A613BC01BBB2203243490@HYD-MKD-MBX02.wipro.com you wrote:
I am trying to bring up u-boot1.1.3 on a custom mpc8247 board, having 32MB flash and two 32 M SDRAM .
See a problem after the relocation happens. The code gets relocated from Flash to RAM correctly. But when the control goes to in_ram it gets looped there
And then gets reset. I have done all the SDRAM tests all are successful. So how to proceed for this issue
First thing you should to is update. Version 1.1.3 is about 6 years old, and for software this means it predates the dinosaurs.
Read: this old stuff is completely unsupported.
Second: read the FAQ; the problem you are running into is described here: http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation
Best regards,
Wolfgang Denk