Dear list,
A few days ago I tried to upgrade the bootloader of my AVR32 NGW100 based development platform to the latest release of U-Boot (2010.06). I use OpenWRT on it and also the U-boot provided with it.
At first, it didn't even compile. Secondly, it didn't work [1]. Reading through the mailing list archives brought a solution for the first problem. The second problem was more complicated and discussed without a resolution.
I'm upgrading from an ancient version 1.3.3 due to some bugs. When I used U-boot on a previous project, it had some problems doing an tftp get due to (if I recall correctly) $serverip not being retrieved correctly from the environment settings. The work around was to set it again after every reset.
So I'm wondering what to do. I can try 1.3.4 or so. I already tried 2008.10, but it failed because it thinks the flash is 4 gig when the environment is empty and kept crashing (some DMA error). This also happened to 2010.06. Reverting to 1.3.3 was the only way to get my board working again. Luckily, I'm blessed with a working JTAG device.
Any advice?