It's possible to chainload U-Boot proper from the vendor firmware in rk3399 chromebooks, but the way the vendor firmware sets up clocks is somehow different than what U-Boot expects. This causes the display to stay devoid of content even though vidconsole claims to work (with patches in process of being upstreamed).
This is meant to be a rk3399 version of commit d3cb46aa8c41 ("rockchip: Init clocks again when chain-loading") which can detect the discrepancy, but this patch instead checks whether SPL (and therefore the clock init) was run via the handoff functionality and runs the init if it was not.
Signed-off-by: Alper Nebi Yasak alpernebiyasak@gmail.com ---
Changes in v2: - Check for SPL handoff instead of always re-initializing
v1: https://patchwork.ozlabs.org/project/uboot/patch/20201022203740.24528-1-alpe...
drivers/clk/rockchip/clk_rk3399.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 1ea41f3c5b2e..64e0e2348db5 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -23,6 +23,8 @@ #include <linux/bitops.h> #include <linux/delay.h>
+DECLARE_GLOBAL_DATA_PTR; + #if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3399_clk_plat { struct dtd_rockchip_rk3399_cru dtd; @@ -50,10 +52,9 @@ struct pll_div { .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ),\ .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};
-#if defined(CONFIG_SPL_BUILD) static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1); static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2, 2); -#else +#if !defined(CONFIG_SPL_BUILD) static const struct pll_div ppll_init_cfg = PLL_DIVISORS(PPLL_HZ, 2, 2, 1); #endif
@@ -1274,7 +1275,6 @@ static struct clk_ops rk3399_clk_ops = { .disable = rk3399_clk_disable, };
-#ifdef CONFIG_SPL_BUILD static void rkclk_init(struct rockchip_cru *cru) { u32 aclk_div; @@ -1352,20 +1352,30 @@ static void rkclk_init(struct rockchip_cru *cru) hclk_div << HCLK_PERILP1_DIV_CON_SHIFT | HCLK_PERILP1_PLL_SEL_GPLL << HCLK_PERILP1_PLL_SEL_SHIFT); } -#endif
static int rk3399_clk_probe(struct udevice *dev) { -#ifdef CONFIG_SPL_BUILD struct rk3399_clk_priv *priv = dev_get_priv(dev); + bool init_clocks = false;
#if CONFIG_IS_ENABLED(OF_PLATDATA) struct rk3399_clk_plat *plat = dev_get_platdata(dev);
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]); #endif - rkclk_init(priv->cru); + +#if defined(CONFIG_SPL_BUILD) + init_clocks = true; +#elif CONFIG_IS_ENABLED(HANDOFF) + if (!(gd->flags & GD_FLG_RELOC)) { + if (!(gd->spl_handoff)) + init_clocks = true; + } #endif + + if (init_clocks) + rkclk_init(priv->cru); + return 0; }