From: Wenyou Yang wenyou.yang@atmel.com
Convert the board to enable the driver model support for LCD/video.
Signed-off-by: Wenyou Yang wenyou.yang@microchip.com ---
arch/arm/dts/at91-sama5d4ek.dts | 26 ++++++++++ arch/arm/mach-at91/Kconfig | 1 + board/atmel/sama5d4ek/sama5d4ek.c | 97 +++-------------------------------- configs/sama5d4ek_mmc_defconfig | 3 +- configs/sama5d4ek_nandflash_defconfig | 3 +- configs/sama5d4ek_spiflash_defconfig | 3 +- include/configs/sama5d4ek.h | 9 ---- 7 files changed, 39 insertions(+), 103 deletions(-)
diff --git a/arch/arm/dts/at91-sama5d4ek.dts b/arch/arm/dts/at91-sama5d4ek.dts index b965f5b39d..a5d75452cf 100644 --- a/arch/arm/dts/at91-sama5d4ek.dts +++ b/arch/arm/dts/at91-sama5d4ek.dts @@ -75,6 +75,32 @@
ahb { apb { + hlcdc: hlcdc@f0000000 { + atmel,vl-bpix = <4>; + atmel,output-mode = <18>; + atmel,guard-time = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>; + status = "okay"; + u-boot,dm-pre-reloc; + + display-timings { + u-boot,dm-pre-reloc; + 800x480 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hsync-len = <5>; + hfront-porch = <128>; + hback-porch = <0>; + vfront-porch = <23>; + vback-porch = <22>; + vsync-len = <5>; + u-boot,dm-pre-reloc; + }; + }; + }; + adc0: adc@fc034000 { pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index a52599ab5b..d2db644fcf 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -123,6 +123,7 @@ config TARGET_SAMA5D4EK select CPU_V7 select SUPPORT_SPL select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT
config TARGET_MA5D4EVK bool "Aries MA5D4EVK Evaluation Kit" diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index ba7974643e..3e104f7167 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -14,11 +14,7 @@ #include <asm/arch/clk.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/sama5d4.h> -#include <atmel_hlcdc.h> #include <debug_uart.h> -#include <lcd.h> -#include <nand.h> -#include <version.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -74,93 +70,15 @@ static void sama5d4ek_usb_hw_init(void) } #endif
-#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 800, - .vl_row = 480, - .vl_clk = 33260000, - .vl_bpix = LCD_BPP, - .vl_tft = 1, - .vl_hsync_len = 5, - .vl_left_margin = 128, - .vl_right_margin = 0, - .vl_vsync_len = 5, - .vl_upper_margin = 23, - .vl_lower_margin = 22, - .mmio = ATMEL_BASE_LCDC, -}; - -/* No power up/down pin for the LCD pannel */ -void lcd_enable(void) { /* Empty! */ } -void lcd_disable(void) { /* Empty! */ } - -unsigned int has_lcdc(void) +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) { - return 1; -} - -static void sama5d4ek_lcd_hw_init(void) -{ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ - - at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */ - at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */ - - /* Enable clock */ - at91_periph_clk_enable(ATMEL_ID_LCDC); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - lcd_printf("%s\n", U_BOOT_VERSION); - lcd_printf("2014 ATMEL Corp\n"); - lcd_printf("at91@atmel.com\n"); - lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - nand_size = 0; -#ifdef CONFIG_NAND_ATMEL - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; +#ifdef CONFIG_DM_VIDEO + at91_video_show_board_info(); #endif - lcd_printf("%ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, nand_size >> 20); + return 0; } -#endif /* CONFIG_LCD_INFO */ - -#endif /* CONFIG_LCD */ +#endif
#ifdef CONFIG_DEBUG_UART_BOARD_INIT static void sama5d4ek_serial3_hw_init(void) @@ -196,9 +114,6 @@ int board_init(void) #ifdef CONFIG_NAND_ATMEL sama5d4ek_nand_hw_init(); #endif -#ifdef CONFIG_LCD - sama5d4ek_lcd_hw_init(); -#endif #ifdef CONFIG_CMD_USB sama5d4ek_usb_hw_init(); #endif diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index a3909a0639..c1eefe3f45 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -72,5 +72,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_LCD=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y CONFIG_FAT_WRITE=y diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index c3d076e729..fb18ba8959 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -69,4 +69,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_LCD=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index 7c6c8f27d6..88357bbcc4 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -68,4 +68,5 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_ATMEL_USBA=y -CONFIG_LCD=y +CONFIG_DM_VIDEO=y +CONFIG_ATMEL_HLCD=y diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 09a9757e6e..ab0147738c 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -47,15 +47,6 @@ #define CONFIG_ATMEL_NAND_HW_PMECC #endif
-/* LCD */ -#define LCD_BPP LCD_COLOR16 -#define LCD_OUTPUT_BPP 18 -#define CONFIG_LCD_LOGO -#define CONFIG_LCD_INFO -#define CONFIG_LCD_INFO_BELOW_LOGO -#define CONFIG_ATMEL_HLCD -#define CONFIG_ATMEL_LCD_RGB565 - #ifdef CONFIG_SYS_USE_SERIALFLASH /* override the bootcmd, bootargs and other configuration for spi flash env*/ #elif CONFIG_SYS_USE_NANDFLASH