As a side note, we just found out that the 859/866 family ONLY supports up to 66MHz external bus... hopefully nobody else has been bitten by this.
if your core freq is >66MHz, you MUST use the external bus x2 divisor
On Wed, Oct 08, 2003 at 11:59:47PM +0200, Wolfgang Denk wrote:
Dear Pantelis,
in message 3F66E0F1.6000608@intracom.gr you wrote:
The following patch adds a program in the tools directory which aids in the programming of the PLPRCR register for MPC86x based boards.
That is given an input clock xin and a target clock gclk2 it will output (if possible) the values of the PCPRCR fields required.
Thanks, added. (But target disabled by default in the tools/Makefile).
Will show up on CVS soon.
Best regards,
Wolfgang Denk
-- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de The use of COBOL cripples the mind; its teaching should, therefore, be regarded as a criminal offense. - E. W. Dijkstra
This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users