While inserting them into the new location, keep them sorted by the register base offset just like in the linux kernel device tree.
While at it fix the indentation.
Signed-off-by: Michael Walle michael@walle.cc --- arch/arm/dts/fsl-ls1028a.dtsi | 202 +++++++++++++++++----------------- 1 file changed, 103 insertions(+), 99 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index c289009ca1..ca593c7218 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -43,105 +43,6 @@ IRQ_TYPE_LEVEL_LOW)>; };
- pcie@1f0000000 { - compatible = "pci-host-ecam-generic"; - /* ECAM bus 0, HW has more space reserved but not populated */ - bus-range = <0x0 0x0>; - reg = <0x01 0xf0000000 0x0 0x100000>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>; - enetc0: pci@0,0 { - reg = <0x000000 0 0 0 0>; - status = "disabled"; - }; - enetc1: pci@0,1 { - reg = <0x000100 0 0 0 0>; - status = "disabled"; - }; - enetc2: pci@0,2 { - reg = <0x000200 0 0 0 0>; - status = "disabled"; - phy-mode = "internal"; - - fixed-link { - speed = <2500>; - full-duplex; - }; - }; - mdio0: pci@0,3 { - #address-cells=<0>; - #size-cells=<1>; - reg = <0x000300 0 0 0 0>; - status = "disabled"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - mscc_felix: pci@0,5 { - reg = <0x000500 0 0 0 0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - mscc_felix_port0: port@0 { - reg = <0>; - status = "disabled"; - }; - - mscc_felix_port1: port@1 { - reg = <1>; - status = "disabled"; - }; - - mscc_felix_port2: port@2 { - reg = <2>; - status = "disabled"; - }; - - mscc_felix_port3: port@3 { - reg = <3>; - status = "disabled"; - }; - - mscc_felix_port4: port@4 { - reg = <4>; - phy-mode = "internal"; - status = "disabled"; - - fixed-link { - speed = <2500>; - full-duplex; - }; - }; - - mscc_felix_port5: port@5 { - reg = <5>; - phy-mode = "internal"; - status = "disabled"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - }; - }; - }; - - enetc6: pci@0,6 { - reg = <0x000600 0 0 0 0>; - status = "disabled"; - phy-mode = "internal"; - }; - }; - soc: soc { compatible = "simple-bus"; #address-cells = <2>; @@ -484,5 +385,108 @@ compatible = "arm,sp805-wdt"; reg = <0x0 0xc000000 0x0 0x1000>; }; + + pcie@1f0000000 { + compatible = "pci-host-ecam-generic"; + /* ECAM bus 0, HW has more space reserved but not populated */ + bus-range = <0x0 0x0>; + reg = <0x01 0xf0000000 0x0 0x100000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>; + + enetc0: pci@0,0 { + reg = <0x000000 0 0 0 0>; + status = "disabled"; + }; + + enetc1: pci@0,1 { + reg = <0x000100 0 0 0 0>; + status = "disabled"; + }; + + enetc2: pci@0,2 { + reg = <0x000200 0 0 0 0>; + status = "disabled"; + phy-mode = "internal"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + mdio0: pci@0,3 { + #address-cells=<0>; + #size-cells=<1>; + reg = <0x000300 0 0 0 0>; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mscc_felix: pci@0,5 { + reg = <0x000500 0 0 0 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mscc_felix_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + mscc_felix_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + mscc_felix_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + mscc_felix_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + mscc_felix_port4: port@4 { + reg = <4>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + mscc_felix_port5: port@5 { + reg = <5>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + }; + }; + }; + + enetc6: pci@0,6 { + reg = <0x000600 0 0 0 0>; + status = "disabled"; + phy-mode = "internal"; + }; + }; }; };