Hello list,
inside the automatic U-Boot patch tracking system a new ticket [DNX#2006040142000222] was created:
<snip>
Brad,
I've uploaded a zip file that contains FPGA designs for ML300, ML310, ML403 and ML410 as well as an U-Boot snapshot with all "Xilinx" patches included to ftp://customer:xilinx@ftp.xilinx.com/upload/xapp542.zip (12 MB)
The design for the ML403 maps the Flash at the reset vector. I have several ML403s that completely boot from linear flash - bitstream, U-Boot, Linux kernel. I've enabled MTD support in the Linux kernel. With
that I can upgrade bitstream and Linux image from within Linux.
As you can see from the name the uploaded zip file is part of a project to update the current Xilinx application note XAPP542 with a newer version. I'm kind of been waiting for the September patches to be applied in the U-Boot CVS but figured Wolfgang must be busy with other stuff as I was myself.
- Peter
bbosch@iphase.com wrote:
Peter Ryser writes:
BTW: you can find a snapshot of U-Boot with board support for ML300, ML310, ML403 and ML410 at http://www.xilinx.com/ml410-p/designs/u-boot.zip The snapshot contains the patches that have been submitted to this mailing list back in September of last year. For ML403 just use
Wolfgang,
Were the Xilinx patches (2005-09-28 thru 2005-10-02) rejected or lost, or are they still in your queue?
Peter,
Do you happen to have a design for the ML403 that boots directly from the linear flash? Perhaps with devices mapped as in board/xilinx/ml403/xparameters.h? It would be easier to start with a design known to work with U-Boot.
Thanks,
--Brad
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&da... _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
</snip>
Your U-Boot support team