On Fri, Jan 13, 2012 at 5:49 PM, Dirk Behme dirk.behme@de.bosch.com wrote:
To be able to load the device tree and initrd correctly, set the fdt_high and initrd_high environment variables.
Using 0xffffffff implies that the device tree and the initrd are initially copied to working addresses. This will avoid an additional copy.
Loading the device tree to 0x30000000 and the initrd to 0x3c000000 should work for both boards, the ARM2 and SabreLite.
Example (SabreLite):
fatload mmc 0:2 0x10000000 uImage fatload mmc 0:2 0x3c000000 uInitrd fatload mmc 0:2 0x30000000 board.dtb bootm 0x10000000 0x3c000000 0x30000000
Note: This requires that the kernel has CONFIG_HIGHMEM enabled.
Signed-off-by: Dirk Behme dirk.behme@de.bosch.com CC: Jason Liu jason.hui@linaro.org CC: Stefano Babic sbabic@denx.de
Note: This patch is against the recent head of u-boot-imx.git including the SabreLite support:
5b894e4d00ff94a221f8cc23d54d08b889f54190 i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board
Note: tools/checkpatch.pl reports 0 errors, 0 warnings
Acked-by: Jason Liu jason.hui@linaro.org
1.7.0.4