On Fri, Apr 8, 2016 at 3:01 AM, Michal Simek michal.simek@xilinx.com wrote:
Add missing DT nodes and enable USB.
Signed-off-by: Michal Simek michal.simek@xilinx.com
Reviewed-by: Nathan Rossi nathan@nathanrossi.com
arch/arm/dts/zynq-microzed.dts | 38 +++++++++++++++++++++++++++++++++++++- configs/zynq_microzed_defconfig | 4 ++++ include/configs/zynq_microzed.h | 2 ++ 3 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts index 793ab44eae24..cb238cd5e7bb 100644 --- a/arch/arm/dts/zynq-microzed.dts +++ b/arch/arm/dts/zynq-microzed.dts @@ -1,7 +1,7 @@ /*
- Xilinx MicroZED board DTS
- Copyright (C) 2013 Xilinx, Inc.
*/
- Copyright (C) 2013 - 2016 Xilinx, Inc.
- SPDX-License-Identifier: GPL-2.0+
@@ -15,12 +15,27 @@ aliases { serial0 = &uart1; spi0 = &qspi;
mmc0 = &sdhci0; }; memory { device_type = "memory"; reg = <0 0x40000000>; };chosen {bootargs = "earlyprintk";stdout-path = "serial0:115200n8";};usb_phy0: phy0 {compatible = "usb-nop-xceiv";#phy-cells = <0>;};+};
+&clkc {
ps-clk-frequency = <33333333>;};
&qspi { @@ -32,3 +47,24 @@ u-boot,dm-pre-reloc; status = "okay"; };
+&gem0 {
status = "okay";phy-mode = "rgmii-id";phy-handle = <ðernet_phy>;ethernet_phy: ethernet-phy@0 {reg = <0>;};+};
+&sdhci0 {
u-boot,dm-pre-reloc;status = "okay";+};
+&usb0 {
status = "okay";dr_mode = "host";usb-phy = <&usb_phy0>;+}; diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 1d70e43df0c8..bd261c16ebb0 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -21,3 +21,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_ZYNQ_GEM=y CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index e66088da4f79..ec7bb1cef553 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -12,6 +12,8 @@
#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ZYNQ_USB
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_MICROZED_H */
1.9.1