Re: [U-Boot] [PATCH] Revert "net: phy: delay only if reset handler is registered"

Tom and Joe,

On Wed, Dec 23, 2015 at 1:42 PM, Fabio Estevam festevam@gmail.com wrote:

Ethernet on mx6cuboxi is also broken because of 59370f3fcd13508 (""net: phy: delay only if reset handler is registered").

I tried doing:

--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -143,7 +143,7 @@ static void setup_iomux_enet(void) SETUP_IOMUX_PADS(enet_pads);

    gpio_direction_output(ETH_PHY_RESET, 0);

•   mdelay(2);
  

•   mdelay(10);
    gpio_set_value(ETH_PHY_RESET, 1);
  

}

,but it did not help.

Any suggestions?

To avoid Ethernet breakage on at least Wandboard and Cubox-i boards on 2016.01, can we apply this revert patch in the meantime?