These nodes are required by mx53ppd when built with CONFIG_DM_MMC=y. They are copied from Linux 4.20.5.
Signed-off-by: Ian Ray ian.ray@ge.com --- arch/arm/dts/imx53.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi index e13009c..0fd4acc 100644 --- a/arch/arm/dts/imx53.dtsi +++ b/arch/arm/dts/imx53.dtsi @@ -33,6 +33,8 @@ i2c2 = &i2c3; mmc0 = &esdhc1; mmc1 = &esdhc2; + mmc2 = &esdhc3; + mmc3 = &esdhc4; };
tzic: tz-interrupt-controller@fffc000 { @@ -86,6 +88,30 @@ bus-width = <4>; status = "disabled"; }; + + esdhc3: esdhc@50020000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x50020000 0x4000>; + interrupts = <3>; + clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + esdhc4: esdhc@50024000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x50024000 0x4000>; + interrupts = <4>; + clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; };
iomuxc: iomuxc@53fa8000 {