On 8 February 2016 at 02:27, Mateusz Kulikowski mateusz.kulikowski@gmail.com wrote:
Support SPMI arbiter on Qualcomm Snapdragon devices.
Signed-off-by: Mateusz Kulikowski mateusz.kulikowski@gmail.com Reviewed-by: Simon Glass sjg@chromium.org Tested-by: Simon Glass sjg@chromium.org
Changes in v3: None Changes in v2:
- Rename DM_SPMI -> SPMI
- Rename p -> priv (in write/read)
- Fix header ordering (again)
- Add reviewed-by
Changes in v1:
- add binding documentation and better Kconfig help
- Changed a bit mapping
- Change include order
- Use clrsetbits* where possible
- Add one more supported dts id
- Handle missing fields in dt properly
doc/device-tree-bindings/spmi/spmi-msm.txt | 26 ++++ drivers/spmi/Kconfig | 7 +- drivers/spmi/Makefile | 1 + drivers/spmi/spmi-msm.c | 189
spmi-pmic-arb.c looks fine along with binding file name as well.
+++++++++++++++++++++++++++++
4 files changed, 222 insertions(+), 1 deletion(-) create mode 100644 doc/device-tree-bindings/spmi/spmi-msm.txt create mode 100644 drivers/spmi/spmi-msm.c
diff --git a/doc/device-tree-bindings/spmi/spmi-msm.txt b/doc/device-tree-bindings/spmi/spmi-msm.txt new file mode 100644 index 0000000..ae47673 --- /dev/null +++ b/doc/device-tree-bindings/spmi/spmi-msm.txt @@ -0,0 +1,26 @@ +Qualcomm SPMI arbiter/bus driver
+This is bus driver for Qualcomm chips that use SPMI to communicate with PMICs.
+Required properties: +- compatible: "qcom,spmi-pmic-arb" +- reg: Register block adresses and sizes for various parts of device:
- PMIC arbiter channel mapping base (PMIC_ARB_REG_CHNLn)
- SPMI write command (master) registers (PMIC_ARB_CORE_SW_DEC_CHANNELS)
- SPMI read command (observer) registers (PMIC_ARB_CORE_REGISTERS_OBS)
+Optional properties (if not set by parent): +- #address-cells: 0x1 - childs slave ID address +- #size-cells: 0x1
+All PMICs should be placed as a child nodes of bus arbiter. +Automatic detection of childs is currently not supported.
+Example:
+spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";reg = <0x200f800 0x200 0x2400000 0x400000 0x2c00000 0x400000>;#address-cells = <0x1>;#size-cells = <0x1>;+}; diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index c70d675..8d25b45 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -8,11 +8,16 @@ config SPMI SPMI (System Power Management Interface) bus is used to connect PMIC devices on various SoCs.
+config SPMI_MSM
boolean "Support Qualcomm SPMI bus"depends on SPMI---help---Support SPMI bus implementation found on Qualcomm Snapdragon SoCs.config SPMI_SANDBOX boolean "Support for Sandbox SPMI bus" depends on SPMI ---help--- Demo SPMI bus implementation. Emulates part of PM8916 as single slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3.
endmenu diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile index 4ca65a9..c0b1220 100644 --- a/drivers/spmi/Makefile +++ b/drivers/spmi/Makefile @@ -5,4 +5,5 @@ #
obj-$(CONFIG_SPMI) += spmi-uclass.o +obj-$(CONFIG_SPMI_MSM) += spmi-msm.o obj-$(CONFIG_SPMI_SANDBOX) += spmi-sandbox.o diff --git a/drivers/spmi/spmi-msm.c b/drivers/spmi/spmi-msm.c new file mode 100644 index 0000000..0cef505 --- /dev/null +++ b/drivers/spmi/spmi-msm.c @@ -0,0 +1,189 @@ +/*
- Qualcomm SPMI bus driver
- (C) Copyright 2015 Mateusz Kulikowski mateusz.kulikowski@gmail.com
- Loosely based on Little Kernel driver
- SPDX-License-Identifier: BSD-3-Clause
- */
+#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <spmi/spmi.h>
+DECLARE_GLOBAL_DATA_PTR;
+#define ARB_CHANNEL_OFFSET(n) (0x4 * (n)) +#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000)
+#define SPMI_REG_CMD0 0x0 +#define SPMI_REG_CONFIG 0x4 +#define SPMI_REG_STATUS 0x8 +#define SPMI_REG_WDATA 0x10 +#define SPMI_REG_RDATA 0x18
+#define SPMI_CMD_OPCODE_SHIFT 27 +#define SPMI_CMD_SLAVE_ID_SHIFT 20 +#define SPMI_CMD_ADDR_SHIFT 12 +#define SPMI_CMD_ADDR_OFFSET_SHIFT 4 +#define SPMI_CMD_BYTE_CNT_SHIFT 0
+#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00 +#define SPMI_CMD_EXT_REG_READ_LONG 0x01
+#define SPMI_STATUS_DONE 0x1
+#define SPMI_MAX_CHANNELS 128 +#define SPMI_MAX_SLAVES 16 +#define SPMI_MAX_PERIPH 256
+struct msm_spmi_priv {
phys_addr_t arb_chnl; /* ARB channel mapping base */phys_addr_t spmi_core; /* SPMI core */phys_addr_t spmi_obs; /* SPMI observer *//* SPMI channel map */uint8_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH];+};
+static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
uint8_t val)+{
struct msm_spmi_priv *priv = dev_get_priv(dev);unsigned channel;uint32_t reg = 0;if (usid >= SPMI_MAX_SLAVES)return -EIO;if (pid >= SPMI_MAX_PERIPH)return -EIO;channel = priv->channel_map[usid][pid];/* Disable IRQ mode for the current channel*/writel(0x0, priv->spmi_core + SPMI_CH_OFFSET(channel) +SPMI_REG_CONFIG);/* Write single byte */writel(val, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_WDATA);/* Prepare write command */reg |= SPMI_CMD_EXT_REG_WRITE_LONG << SPMI_CMD_OPCODE_SHIFT;reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);reg |= (pid << SPMI_CMD_ADDR_SHIFT);reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);reg |= 1; /* byte count *//* Send write command */writel(reg, priv->spmi_core + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);/* Wait till CMD DONE status */reg = 0;while (!reg) {reg = readl(priv->spmi_core + SPMI_CH_OFFSET(channel) +SPMI_REG_STATUS);}if (reg ^ SPMI_STATUS_DONE) {printf("SPMI write failure.\n");return -EIO;}return 0;+}
+static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off) +{
struct msm_spmi_priv *priv = dev_get_priv(dev);unsigned channel;uint32_t reg = 0;if (usid >= SPMI_MAX_SLAVES)return -EIO;if (pid >= SPMI_MAX_PERIPH)return -EIO;channel = priv->channel_map[usid][pid];/* Disable IRQ mode for the current channel*/writel(0x0, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG);/* Prepare read command */reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT;reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);reg |= (pid << SPMI_CMD_ADDR_SHIFT);reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);reg |= 1; /* byte count *//* Request read */writel(reg, priv->spmi_obs + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);/* Wait till CMD DONE status */reg = 0;while (!reg) {reg = readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) +SPMI_REG_STATUS);}if (reg ^ SPMI_STATUS_DONE) {printf("SPMI read failure.\n");return -EIO;}/* Read the data */return readl(priv->spmi_obs + SPMI_CH_OFFSET(channel) +SPMI_REG_RDATA) & 0xFF;+}
+static struct dm_spmi_ops msm_spmi_ops = {
.read = msm_spmi_read,.write = msm_spmi_write,+};
+static int msm_spmi_probe(struct udevice *dev) +{
struct udevice *parent = dev->parent;struct msm_spmi_priv *priv = dev_get_priv(dev);int i;priv->arb_chnl = dev_get_addr(dev);priv->spmi_core = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,parent->of_offset,dev->of_offset,"reg", 1, NULL);priv->spmi_obs = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,parent->of_offset,dev->of_offset, "reg",2, NULL);if (priv->arb_chnl == FDT_ADDR_T_NONE ||priv->spmi_core == FDT_ADDR_T_NONE ||priv->spmi_obs == FDT_ADDR_T_NONE)return -EINVAL;/* Scan peripherals connected to each SPMI channel */for (i = 0; i < SPMI_MAX_CHANNELS ; i++) {uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i));uint8_t slave_id = (periph & 0xf0000) >> 16;uint8_t pid = (periph & 0xff00) >> 8;priv->channel_map[slave_id][pid] = i;}return 0;+}
+static const struct udevice_id msm_spmi_ids[] = {
{ .compatible = "qcom,spmi-pmic-arb" },{ }+};
+U_BOOT_DRIVER(msm_spmi) = {
.name = "msm_spmi",.id = UCLASS_SPMI,.of_match = msm_spmi_ids,.ops = &msm_spmi_ops,.probe = msm_spmi_probe,.priv_auto_alloc_size = sizeof(struct msm_spmi_priv),+};
2.5.0
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot