On Wed, Jun 6, 2018 at 9:00 PM, Miquel Raynal miquel.raynal@bootlin.com wrote:
From: Boris Brezillon boris.brezillon@bootlin.com
Some controllers are exposing high-level interfaces to access various kind of SPI memories. Unfortunately they do not fit in the current spi_controller model and usually have drivers placed in drivers/mtd/spi-nor which are only supporting SPI NORs and not SPI memories in general.
This is an attempt at defining a SPI memory interface which works for all kinds of SPI memories (NORs, NANDs, SRAMs).
Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com
drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-mem.c | 500 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/spi-mem.h | 258 ++++++++++++++++++++++++++ include/spi.h | 11 ++ 5 files changed, 777 insertions(+) create mode 100644 drivers/spi/spi-mem.c create mode 100644 include/spi-mem.h
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 235a8c7d73..0ee371b2d9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -15,6 +15,13 @@ config DM_SPI
if DM_SPI
+config SPI_MEM
bool "SPI memory extension"helpEnable this option if you want to enable the SPI memory extension.This extension is meant to simplify interaction with SPI memoriesby providing an high-level interface to send memory-like commands.config ALTERA_SPI bool "Altera SPI driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 4b6000fd9a..982529a0e6 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -10,6 +10,7 @@ ifdef CONFIG_DM_SPI obj-y += spi-uclass.o obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o obj-$(CONFIG_SOFT_SPI) += soft_spi.o +obj-$(CONFIG_SPI_MEM) += spi-mem.o else obj-y += spi.o obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c new file mode 100644 index 0000000000..1aabe56819 --- /dev/null +++ b/drivers/spi/spi-mem.c @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2018 Exceet Electronics GmbH
- Copyright (C) 2018 Bootlin
- Author: Boris Brezillon boris.brezillon@bootlin.com
- */
+#ifndef __UBOOT__ +#include <linux/dmaengine.h> +#include <linux/pm_runtime.h> +#include "internals.h" +#else +#include <spi.h> +#include <spi-mem.h> +#endif
+#ifndef __UBOOT__
I would like remove Linux stuff atleast on this file becuase it's difficult for me to read or review the code and also driver/spi have fully u-boot dm stuff. I know it's easy for Linux sync but for this we can do manual sync what ever need. I'm on something what from Linux.