Hi,
-----Original Message----- From: Jagan Teki [mailto:jagannadh.teki@gmail.com] Sent: Tuesday, September 26, 2017 10:17 AM To: Liam Beguin liambeguin@gmail.com Cc: u-boot@lists.denx.de; Michal Simek michals@xilinx.com; Siva Durga Prasad Paladugu sivadur@xilinx.com Subject: Re: [U-Boot] ZynqMP qspi
On Tue, Sep 26, 2017 at 9:07 AM, Liam Beguin liambeguin@gmail.com wrote:
Resending with proper CC since the email came back.
On 24/09/17 09:36 PM, Liam Beguin wrote:
Hi,
I'm testing a new Xilinx zynqmp dev board and was not able to probe the qspi with the latest mainline U-Boot. I see that there is a
'zynqmp_qspi'
driver in the Xilinx tree [1] but nothing in mainline. After a little digging, I found a thread on the list [2] (and [3]) and was wondering in what state this was now.
I am planning to send the new series in 1-2 weeks, probably you can wait till then or you can try with the patch[2] and see if you are able to get it working with those( those are known to be working when I sent ). Also, please note that as of now iam targeting only for qspi single mode not the dual modes.
Thanks, Siva
xlnx/blob/master/drivers/spi/zynqmp_
qspi.c [2] https://lists.denx.de/pipermail/u-boot/2016-July/261003.html [3] https://lists.denx.de/pipermail/u-boot/2016-
November/273650.html
I think, Siva is working on it. and he would be best to comment this.
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.