This patchset adds the missing ethernet mvpp2 patches from the Marvell U-Boot SDK version to support and fix higher connection speeds. This is done in preparation for the integration of the Octeon TX2 CN913x support, which uses the updated version of this code.
Please note that I explicitly did not remove the incorrectly used PHY_INTERFACE_MODE_SGMII_2500 changes from these patches. This makes it easier to follow the Marvell downstream code. SGMII_2500 will be removed by the follow-up patch, that I already did send a bit earlier today. Sorry, I forgot to send this series earlier.
Thanks, Stefan
Ben Peled (3): net: mvpp2: AN Bypass in 1000 and 2500 basex mode net: mvpp2: remove unused define MVPP22_SMI_PHY_ADDR_REG net: mvpp2: fix missing switch case break
Marcin Wojtas (2): net: mvpp2: remove redundant SMI address configuration net: mvpp2: add explicit sgmii-2500 support
Stefan Chulski (5): phy: introduce 1000BaseX and 2500BaseX modes net: mvpp2: add CP115 port1 10G/5G SFI support net: mvpp2: add 1000BaseX and 2500BaseX ppv2 support net: mvpp2: Fix 2.5G GMII_SPEED configurations net: mvpp2: allow MDIO registration for fixed links
drivers/net/mvpp2.c | 257 +++++++++++++++++++++++++--------------- include/phy_interface.h | 4 + 2 files changed, 163 insertions(+), 98 deletions(-)