On 05/14/2015 08:08 AM, Tim Harvey wrote:
Display the max CPU frequency as well as the current running CPU frequency if the max CPU frequency is available and differs from the current CPU frequency.
Before: CPU: Freescale i.MX6Q rev1.2 at 792 MHz
After - using an 800MHz IMX6DL (running at its max) CPU: Freescale i.MX6DL rev1.1 at 792 MHz
After - using a 1GHz IMX6Q (not running at its max): CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
Signed-off-by: Tim Harvey tharvey@gateworks.com
v2:
- split out from patch that obtains the max cpu freq
- add before/after example and more description of change
Signed-off-by: Tim Harvey tharvey@gateworks.com
arch/arm/imx-common/cpu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 067d08f..6b20482 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -142,7 +142,7 @@ const char *get_imx_type(u32 imxtype)
int print_cpuinfo(void) {
- u32 cpurev;
u32 cpurev, max_freq;
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) struct udevice *thermal_dev;
@@ -151,11 +151,25 @@ int print_cpuinfo(void)
cpurev = get_cpu_rev();
+#if defined(CONFIG_MX6)
- printf("CPU: Freescale i.MX%s rev%d.%d",
get_imx_type((cpurev & 0xFF000) >> 12),(cpurev & 0x000F0) >> 4,(cpurev & 0x0000F) >> 0);- max_freq = get_cpu_speed_grade_hz();
- if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) {
printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);- } else {
printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000,mxc_get_clock(MXC_ARM_CLK) / 1000000);- }
+#else printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", get_imx_type((cpurev & 0xFF000) >> 12), (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); +#endif
#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
Tested-by: Nikolay Dimitrov picmaster@mail.bg
Regards, Nikolay