From: Frédéric Leroy fredo@starox.org
The cloudbox device have a different ethernet phy setup than other ns2 devices. We get initialization value from the GPL LaCie source
Signed-off-by: Frédéric Leroy fredo@starox.org --- board/LaCie/common/common.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c index a62bf9f..d828685 100644 --- a/board/LaCie/common/common.c +++ b/board/LaCie/common/common.c @@ -52,10 +52,18 @@ void mv_phy_88e1318_init(const char *name, u16 phyaddr) /* * Set control mode 4 for LED[0]. */ + #ifndef CONFIG_CLOUDBOX miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3); miiphy_read(name, phyaddr, 16, ®); reg |= 0xf; miiphy_write(name, phyaddr, 16, reg); + #else + miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3); + miiphy_read(name, phyaddr, 17, ®); + reg &= ~0x3f; + reg |= 0x15; + miiphy_write(name, phyaddr, 17, reg); + #endif
/* * Enable RGMII delay on Tx and Rx for CPU port