This is based on some old patches from the chromeos-v2011.12 branch of http://git.chromium.org/chromiumos/third_party/u-boot.git by Taylor Hutt. Specifically:
http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit... exynos: sata: on-board controller initialization Signed-off-by: Taylor Hutt thutt@chromium.org
http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit... exynos: sata: Add sata_initialize() interface Signed-off-by: Taylor Hutt thutt@chromium.org
http://git.chromium.org/gitweb/?p=chromiumos/third_party/u-boot.git;a=commit... exynos: sata: SATA self-configuration for when SATA device is enabled Signed-off-by: Taylor Hutt thutt@chromium.org
As well as rebasing there have been some significant changes.
- Drop support for smdk5250, which I don't own. - Implement support for arndale, which I do. - Since arndale has no need to frob a GPIO on SATA init drop the associated code. - Initialise via the existing scsi_init hook rather than introducing sata_initialize, associated build system and include/configs/*.h changes. - Use set/clrbits in a bunch of places - Add some #defines for some magic numbers. - Use samsung_get_base_* for peripheral base addresses and structs to access individual registers - Lots of coding style improvements (checkpatch.pl clean) and general cleanup
Before launching the OS reset the PHY, otherwise Linux cannot reliably detect the disk.
Signed-off-by: Ian Campbell ian.campbell@citrix.com Cc: Taylor Hutt thutt@chromium.org Cc: Simon Glass sjg@chromium.org --- Lots of changes in v2: - Rebase to latest master branch. - use samsung_get_base_* for sata phy - use samsung_get_base_* for sata i2c - use samsung_get_base_* for sata axi - Lots of Coding Style improvements - Drop unused mmio argument to phy init - Move code controlling phy power to power.c - Remove unused SCLK_SATA_FREQ - Use #defines for SATA_GENERATION<N>, less fickle than enum - avoid non-existent BIT macro - Use bool more consistently in a few places - No uppercase variable names - Use SPDX License + copyright - Use arch_preboot_os to reset SATA controller, and do so more thoroughly than in the previous HACK. It now appears to be reliable in my testing. --- arch/arm/cpu/armv7/exynos/Makefile | 4 + arch/arm/cpu/armv7/exynos/power.c | 23 ++ arch/arm/cpu/armv7/exynos/sata.c | 412 +++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/exynos/soc.c | 8 + arch/arm/include/asm/arch-exynos/cpu.h | 15 ++ arch/arm/include/asm/arch-exynos/power.h | 4 + arch/arm/include/asm/arch-exynos/sata.h | 13 + arch/arm/lib/board.c | 1 + board/samsung/arndale/arndale.c | 9 + include/configs/arndale.h | 3 + include/configs/exynos5-common.h | 18 ++ 11 files changed, 510 insertions(+) create mode 100644 arch/arm/cpu/armv7/exynos/sata.c create mode 100644 arch/arm/include/asm/arch-exynos/sata.h
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile index e207bd6..c74a2d4 100644 --- a/arch/arm/cpu/armv7/exynos/Makefile +++ b/arch/arm/cpu/armv7/exynos/Makefile @@ -7,6 +7,10 @@
obj-y += clock.o power.o soc.o system.o pinmux.o tzpc.o
+ifndef CONFIG_SPL_BUILD +obj-$(CONFIG_EXYNOS5250_AHCI) += sata.o +endif + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_EXYNOS5) += clock_init_exynos5.o obj-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 1520d64..8f36d10 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -37,6 +37,29 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable) exynos4_mipi_phy_control(dev_index, enable); }
+void exynos5_set_sata_phy_ctrl(unsigned int enable) +{ + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + if (enable) { + /* Enabling SATA_PHY */ + setbits_le32(&power->sata_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } else { + /* Disabling SATA_PHY */ + clrbits_le32(&power->sata_phy_control, + POWER_USB_HOST_PHY_CTRL_EN); + } +} + +void set_sata_phy_ctrl(unsigned int enable) +{ + if (cpu_is_exynos5()) + exynos5_set_sata_phy_ctrl(enable); +} + + void exynos5_set_usbhost_phy_ctrl(unsigned int enable) { struct exynos5_power *power = diff --git a/arch/arm/cpu/armv7/exynos/sata.c b/arch/arm/cpu/armv7/exynos/sata.c new file mode 100644 index 0000000..4e994d6 --- /dev/null +++ b/arch/arm/cpu/armv7/exynos/sata.c @@ -0,0 +1,412 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * Copyright (c) 2014 Ian Campbell + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <asm/types.h> +#include <ahci.h> +#include <common.h> +#include <fdtdec.h> +#include <scsi.h> +#include <asm/arch/sata.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/clock.h> +#include <asm/arch/clk.h> +#include <asm/arch/power.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <linux/compiler.h> + +#define SATA_TIME_LIMIT 10000 +#define SATA_PHY_I2C_SLAVE_ADDRS 0x70 + +/********************** PHY **************/ + +struct sata_phy { + unsigned int res1; /* 0x00 */ + unsigned int reset; /* 0x04 */ +#define RESET_GLOBAL_RST_N (1 << 0) +#define RESET_CMN_RST_N (1 << 1) +#define RESET_CMN_BLOCK_RST_N (1 << 2) +#define RESET_CMN_I2C_RST_N (1 << 3) +#define RESET_TX_RX_PIPE_RST_N (1 << 4) +#define RESET_TX_RX_BLOCK_RST_N (1 << 5) +#define RESET_TX_RX_I2C_RST_N ((1 << 6) | (1 << 7)) +#define LINK_RESET 0xF0000 + unsigned int res2; /* 0x08 */ + unsigned int res3; /* 0x0c */ + unsigned int mode0; /* 0x10 */ + unsigned int ctrl0; /* 0x14 */ +#define CTRL0_P0_PHY_CALIBRATED_SEL (1 << 9) +#define CTRL0_P0_PHY_CALIBRATED (1 << 8) + unsigned int res4[0x32]; /* 0x18..0xdc */ + unsigned int ctrlm; /* 0xE0 */ +#define PHCTRLM_REF_RATE (1 << 1) +#define PHCTRLM_HIGH_SPEED (1 << 0) + unsigned int res5[0x03]; /* 0xE4..0xEF*/ + unsigned int statm; /* 0xF0 */ +#define PHSTATM_PLL_LOCKED (1 << 0) +}; + +/********************** I2C **************/ + +struct sata_i2c { + unsigned int con; /* 0x00 */ + unsigned int stat; /* 0x04 */ + unsigned int addr; /* 0x08 */ + unsigned int ds; /* 0x0c */ + unsigned int lc; /* 0x10 */ +}; + +/* I2CCON reg */ +#define CON_ACKEN (1 << 7) +#define CON_CLK512 (1 << 6) +#define CON_CLK16 (~CON_CLK512) +#define CON_INTEN (1 << 5) +#define CON_INTPND (1 << 4) +#define CON_TXCLK_PS (0xF) + +/* I2CSTAT reg */ +#define STAT_MSTT (0x3 << 6) +#define STAT_BSYST (1 << 5) +#define STAT_RTEN (1 << 4) +#define STAT_LAST (1 << 0) + +#define LC_FLTR_EN (1 << 2) + +#define SATA_PHY_CON_RESET 0xF003F + +#define SATA_GENERATION1 (0) +#define SATA_GENERATION2 (1 << 0) +#define SATA_GENERATION3 (1 << 1) + +static bool sata_is_reg(void __iomem *reg, u32 checkbit, u32 status) +{ + if ((__raw_readl(reg) & checkbit) == status) + return true; + else + return false; +} + +static bool wait_for_reg_status(void __iomem *reg, u32 checkbit, u32 status) +{ + u32 time_limit_cnt = 0; + + while (!sata_is_reg(reg, checkbit, status)) { + if (time_limit_cnt == SATA_TIME_LIMIT) + return false; + udelay(1000); + time_limit_cnt++; + } + return true; +} + +static void sata_set_gen(u8 gen) +{ + struct sata_phy *phy = + (struct sata_phy *)samsung_get_base_sata_phy(); + + clrsetbits_le32(&phy->mode0, 0x3, gen); +} + +/* Address :I2C Address */ +static void sata_i2c_write_addrs(u8 data) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + __raw_writeb((data & 0xFE), &i2c->ds); +} + +static void sata_i2c_write_data(u8 data) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + __raw_writeb((data), &i2c->ds); +} + +static void sata_i2c_start(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + setbits_le32(&i2c->stat, STAT_BSYST); +} + +static void sata_i2c_stop(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + clrbits_le32(&i2c->stat, STAT_BSYST); +} + +static bool sata_i2c_get_int_status(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + if ((__raw_readl(&i2c->con)) & CON_INTPND) + return true; + else + return false; +} + +static bool sata_i2c_is_tx_ack(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + if ((__raw_readl(&i2c->con)) & STAT_LAST) + return false; + else + return true; +} + +static bool sata_i2c_is_bus_ready(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + if ((__raw_readl(&i2c->stat)) & STAT_BSYST) + return false; + else + return true; +} + +static bool sata_i2c_wait_for_busready(u32 time_out) +{ + while (--time_out) { + if (sata_i2c_is_bus_ready()) + return true; + udelay(100); + } + return false; +} + +static bool sata_i2c_wait_for_tx_ack(u32 time_out) +{ + while (--time_out) { + if (sata_i2c_get_int_status()) { + if (sata_i2c_is_tx_ack()) + return true; + } + udelay(100); + } + return false; +} + +static void sata_i2c_clear_int_status(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + clrbits_le32(&i2c->con, CON_INTPND); +} + +static void sata_i2c_set_ack_gen(bool enable) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + if (enable) + setbits_le32(&i2c->con, CON_ACKEN); + else + clrbits_le32(&i2c->con, CON_ACKEN); +} + +static void sata_i2c_set_master_tx(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + /* Disable I2C */ + clrbits_le32(&i2c->stat, STAT_RTEN); + + /* Clear Mode */ + clrbits_le32(&i2c->stat, STAT_MSTT); + + sata_i2c_clear_int_status(); + + /* interrupt disable */ + clrbits_le32(&i2c->con, CON_INTEN); + + /* Master, Send mode */ + setbits_le32(&i2c->stat, STAT_MSTT); + + /* interrupt enable */ + setbits_le32(&i2c->con, CON_INTEN); + + /* Enable I2C */ + setbits_le32(&i2c->stat, STAT_RTEN); +} + +static void sata_i2c_init(void) +{ + struct sata_i2c *i2c = + (struct sata_i2c *)samsung_get_base_sata_i2c(); + + clrbits_le32(&i2c->con, ~CON_CLK16); + clrbits_le32(&i2c->con, CON_TXCLK_PS); + setbits_le32(&i2c->con, 2 & CON_TXCLK_PS); + clrbits_le32(&i2c->lc, LC_FLTR_EN); + + sata_i2c_set_ack_gen(false); +} + +static bool sata_i2c_send(u8 slave_addrs, u8 addrs, u8 data) +{ + struct sata_phy *phy = + (struct sata_phy *)samsung_get_base_sata_phy(); + bool ret = false; + + if (!sata_i2c_wait_for_busready(SATA_TIME_LIMIT)) + return false; + + sata_i2c_init(); + sata_i2c_set_master_tx(); + + __raw_writel(SATA_PHY_CON_RESET, &phy->reset); + sata_i2c_write_addrs(slave_addrs); + sata_i2c_start(); + + if (!sata_i2c_wait_for_tx_ack(SATA_TIME_LIMIT)) + goto stop; + + sata_i2c_write_data(addrs); + sata_i2c_clear_int_status(); + + if (!sata_i2c_wait_for_tx_ack(SATA_TIME_LIMIT)) + goto stop; + + sata_i2c_write_data(data); + sata_i2c_clear_int_status(); + + if (!sata_i2c_wait_for_tx_ack(SATA_TIME_LIMIT)) + goto stop; + + ret = true; + +stop: + sata_i2c_stop(); + sata_i2c_clear_int_status(); + sata_i2c_wait_for_busready(SATA_TIME_LIMIT); + + return ret; +} + +static bool ahci_phy_init(void) +{ + return sata_i2c_send(SATA_PHY_I2C_SLAVE_ADDRS, 0x3a, 0x0b); +} + +static int exynos5_ahci_init(void) +{ + struct sata_phy *phy = + (struct sata_phy *)samsung_get_base_sata_phy(); + int ret; + + if (sata_is_reg(&phy->ctrl0, + CTRL0_P0_PHY_CALIBRATED, CTRL0_P0_PHY_CALIBRATED)) { + printf("%s: already calibrated?\n", __func__); + } + + /* Clear phy control enable. Seems to be necessary to + * reinitialise on a warm reboot, at least sometimes. */ + set_sata_phy_ctrl(0); + udelay(1000); + + set_sata_phy_ctrl(1); + + __raw_writel(0, &phy->reset); + setbits_le32(&phy->reset, + RESET_GLOBAL_RST_N| + RESET_CMN_BLOCK_RST_N|RESET_CMN_I2C_RST_N| + RESET_TX_RX_PIPE_RST_N|RESET_TX_RX_BLOCK_RST_N); + + setbits_le32(&phy->reset, LINK_RESET); + + setbits_le32(&phy->reset, RESET_CMN_RST_N); + + clrbits_le32(&phy->ctrlm, PHCTRLM_REF_RATE); + + /* High speed enable for Gen3 */ + setbits_le32(&phy->ctrlm, PHCTRLM_HIGH_SPEED); + + setbits_le32(&phy->ctrl0, + CTRL0_P0_PHY_CALIBRATED_SEL|CTRL0_P0_PHY_CALIBRATED); + + sata_set_gen(SATA_GENERATION3); + + ret = ahci_phy_init(); + + /* release cmu reset */ + clrbits_le32(&phy->reset, RESET_CMN_RST_N); + + setbits_le32(&phy->reset, RESET_CMN_RST_N); + + if (wait_for_reg_status(&phy->statm, + PHSTATM_PLL_LOCKED, 1)) + return ret; + + return 0; +} + +static void exynos5_enable_clock_gates(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + /* Turn on all SATA clock gates & DMA gates. */ + const unsigned sata_clocks = (1 << 25) | (1 << 24) | (1 << 6); + const unsigned dma_clocks = (2 << 1) | (1 << 1); + + setbits_le32(&clk->gate_ip_fsys, sata_clocks|dma_clocks); +} + +int exynos5_sata_init(void) +{ + BUILD_BUG_ON(offsetof(struct sata_phy, reset) != 0x04); + BUILD_BUG_ON(offsetof(struct sata_phy, mode0) != 0x10); + BUILD_BUG_ON(offsetof(struct sata_phy, ctrl0) != 0x14); + BUILD_BUG_ON(offsetof(struct sata_phy, ctrlm) != 0xe0); + BUILD_BUG_ON(offsetof(struct sata_phy, statm) != 0xf0); + + BUILD_BUG_ON(offsetof(struct sata_i2c, con) != 0x00); + BUILD_BUG_ON(offsetof(struct sata_i2c, stat) != 0x04); + BUILD_BUG_ON(offsetof(struct sata_i2c, addr) != 0x08); + BUILD_BUG_ON(offsetof(struct sata_i2c, ds) != 0x0c); + BUILD_BUG_ON(offsetof(struct sata_i2c, lc) != 0x10); + + exynos5_enable_clock_gates(); + + if (exynos5_ahci_init()) { + ahci_init(samsung_get_base_sata_axi()); + return 0; + } + return -ENODEV; +} + +int exynos5_sata_deinit(void) +{ + struct sata_phy *phy = + (struct sata_phy *)samsung_get_base_sata_phy(); + + sata_set_gen(SATA_GENERATION1); + + clrbits_le32(&phy->ctrl0, + CTRL0_P0_PHY_CALIBRATED_SEL|CTRL0_P0_PHY_CALIBRATED); + + /* Disable High speed enable for Gen3 */ + clrbits_le32(&phy->ctrlm, PHCTRLM_HIGH_SPEED); + + setbits_le32(&phy->ctrlm, PHCTRLM_REF_RATE); + + __raw_writel(0, &phy->reset); + + set_sata_phy_ctrl(0); + + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index 8c7d7d8..1cd8b7b 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -8,6 +8,7 @@ #include <common.h> #include <asm/io.h> #include <asm/system.h> +#include <asm/arch/sata.h>
enum l2_cache_params { CACHE_TAG_RAM_SETUP = (1 << 9), @@ -29,6 +30,13 @@ void enable_caches(void) } #endif
+void arch_preboot_os(void) +{ +#if defined(CONFIG_SCSI_AHCI) + exynos5_sata_deinit(); +#endif +} + #ifndef CONFIG_SYS_L2CACHE_OFF /* * Set L2 cache parameters diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 29674ad..7d53995 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -56,6 +56,9 @@ #define EXYNOS4_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_USB3PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DMC_TZASC_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_SATA_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_SATA_I2C_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_SATA_AXI_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */ #define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 @@ -102,6 +105,9 @@ #define EXYNOS4X12_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_USB3PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_DMC_TZASC_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SATA_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SATA_I2C_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SATA_AXI_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 */ #define EXYNOS5_I2C_SPACING 0x10000 @@ -130,8 +136,11 @@ #define EXYNOS5_USB_HOST_EHCI_BASE 0x12110000 #define EXYNOS5_USBPHY_BASE 0x12130000 #define EXYNOS5_USBOTG_BASE 0x12140000 +#define EXYNOS5_SATA_PHY_BASE 0x12170000 +#define EXYNOS5_SATA_I2C_BASE 0x121d0000 #define EXYNOS5_MMC_BASE 0x12200000 #define EXYNOS5_SROMC_BASE 0x12250000 +#define EXYNOS5_SATA_AXI_BASE 0x122f0000 #define EXYNOS5_UART_BASE 0x12C00000 #define EXYNOS5_I2C_BASE 0x12C60000 #define EXYNOS5_SPI_BASE 0x12D20000 @@ -185,6 +194,9 @@ #define EXYNOS5420_MODEM_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5420_USB3PHY_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5420_USB_HOST_XHCI_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS5420_SATA_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS5420_SATA_I2C_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS5420_SATA_AXI_BASE DEVICE_NOT_AVAILABLE
#ifndef __ASSEMBLY__ #include <asm/io.h> @@ -314,6 +326,9 @@ SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE) SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE) SAMSUNG_BASE(dmc_tzasc, DMC_TZASC_BASE) SAMSUNG_BASE(audio_ass, AUDIOSS_BASE) +SAMSUNG_BASE(sata_phy, SATA_PHY_BASE) +SAMSUNG_BASE(sata_i2c, SATA_I2C_BASE) +SAMSUNG_BASE(sata_axi, SATA_AXI_BASE) #endif
#endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index 3f97b31..da023ea 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -1704,6 +1704,10 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable); #define EXYNOS_MIPI_PHY_SRESETN (1 << 1) #define EXYNOS_MIPI_PHY_MRESETN (1 << 2)
+void set_sata_phy_ctrl(unsigned int enable); + +#define EXYNOS_SATA_PHY_CONTROL_EN (1 << 0) + void set_usbhost_phy_ctrl(unsigned int enable);
/* Enables hardware tripping to power off the system when TMU fails */ diff --git a/arch/arm/include/asm/arch-exynos/sata.h b/arch/arm/include/asm/arch-exynos/sata.h new file mode 100644 index 0000000..94c7736 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/sata.h @@ -0,0 +1,13 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __EXYNOS5_SATA_H +#define __EXYNOS5_SATA_H + +int exynos5_sata_init(void); +int exynos5_sata_deinit(void); + +#endif + diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index f606255..0de0c76 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -35,6 +35,7 @@ #include <mmc.h> #include <scsi.h> #include <status_led.h> +#include <sata.h> #include <libfdt.h> #include <fdtdec.h> #include <post.h> diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c index 881d080..43f4058 100644 --- a/board/samsung/arndale/arndale.c +++ b/board/samsung/arndale/arndale.c @@ -10,6 +10,7 @@ #include <asm/arch/pinmux.h> #include <asm/arch/dwmmc.h> #include <asm/arch/power.h> +#include <asm/arch/sata.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -31,6 +32,14 @@ int board_usb_init(int index, enum usb_init_type init) } #endif
+#ifdef CONFIG_SCSI_AHCI +int scsi_init(void) +{ + printf("ARNDALE SCSI INIT\n"); + return exynos5_sata_init(); +} +#endif + int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 81e8a7c..85e9295 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -12,6 +12,9 @@ #define EXYNOS_FDTFILE_SETTING \ "fdtfile=exynos5250-arndale.dtb\0"
+/* AHCI */ +#define CONFIG_EXYNOS5250_AHCI + #include "exynos5250-common.h"
/* SD/MMC configuration */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index e1f5783..3000c97 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -163,6 +163,18 @@ #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/
+/* SATA controller driver */ +#ifdef CONFIG_EXYNOS5250_AHCI +#define CONFIG_CMD_SCSI +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#endif + /* SHA hashing */ #define CONFIG_CMD_HASH #define CONFIG_HASH_VERIFY @@ -184,10 +196,16 @@ #define CONFIG_FIT #define CONFIG_FIT_BEST_MATCH
+#ifdef CONFIG_EXYNOS5250_AHCI +#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) +#else +#define BOOT_TARGET_DEVICES_SCSI(func) +#endif
#define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ + BOOT_TARGET_DEVICES_SCSI(func) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na)