On Mon, Apr 15, 2019 at 2:58 AM Clément Péron peron.clem@gmail.com wrote:
Hi,
On Sun, 14 Apr 2019 at 19:29, Jagan Teki jagan@amarulasolutions.com wrote:
On Fri, Apr 12, 2019 at 7:45 PM Clément Péron peron.clem@gmail.com wrote:
Beelink GS1 is an Allwinner H6 based TV box, which support:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 2GB LPDDR3 RAM
- 16GB eMMC
- AXP805 PMIC
- 1Gbps GMAC via RTL8211E
- USB 2.0 and 3.0 Host
- HDMI port
- S/PDIF port
- 5V/2A DC power supply
- Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS)
Please dts sync commit details here.
Signed-off-by: Clément Péron peron.clem@gmail.com
arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-beelink-gs1.dts | 184 +++++++++++++++++++++++++
Seems like this has part of required nodes, sync the complete dts.
Ok so you want to add the complete dts from linux.
I think only IP used in U-boot are needed.
I will do that in v3
configs/beelink_gs1_defconfig | 15 ++
Add entry on board/sunxi/MAINTAINERS
Ok
3 files changed, 200 insertions(+) create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts create mode 100644 configs/beelink_gs1_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 86a01c2c70..61e7156284 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -467,6 +467,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \ sun50i-h5-orangepi-prime.dtb \ sun50i-h5-orangepi-zero-plus2.dtb dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-beelink-gs1.dtb \ sun50i-h6-orangepi-lite2.dtb \ sun50i-h6-orangepi-one-plus.dtb \ sun50i-h6-pine-h64.dtbdiff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts new file mode 100644 index 0000000000..54b0882bed --- /dev/null +++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/*
- Copyright (C) 2019 Clément Péron peron.clem@gmail.com
- */
+/dts-v1/;
+#include "sun50i-h6.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
model = "Beelink GS1";compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";aliases {serial0 = &uart0;};chosen {stdout-path = "serial0:115200n8";};leds {compatible = "gpio-leds";power {label = "beelink:white:power";gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */default-state = "on";};};reg_vcc5v: vcc5v {/* board wide 5V supply directly from the DC jack */compatible = "regulator-fixed";regulator-name = "vcc-5v";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;regulator-always-on;};+};
+&mmc0 {
vmmc-supply = <®_cldo1>;cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;bus-width = <4>;status = "okay";+};
+&mmc2 {
vmmc-supply = <®_cldo1>;vqmmc-supply = <®_bldo2>;non-removable;cap-mmc-hw-reset;bus-width = <8>;status = "okay";+};
+&r_i2c {
status = "okay";axp805: pmic@36 {compatible = "x-powers,axp805", "x-powers,axp806";reg = <0x36>;interrupt-parent = <&r_intc>;interrupts = <0 IRQ_TYPE_LEVEL_LOW>;interrupt-controller;#interrupt-cells = <1>;x-powers,self-working-mode;vina-supply = <®_vcc5v>;vinb-supply = <®_vcc5v>;vinc-supply = <®_vcc5v>;vind-supply = <®_vcc5v>;vine-supply = <®_vcc5v>;aldoin-supply = <®_vcc5v>;bldoin-supply = <®_vcc5v>;cldoin-supply = <®_vcc5v>;regulators {reg_aldo1: aldo1 {regulator-always-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc-pl";};reg_aldo2: aldo2 {regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc-ac200";regulator-enable-ramp-delay = <100000>;};reg_aldo3: aldo3 {regulator-always-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc25-dram";};reg_bldo1: bldo1 {regulator-always-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-name = "vcc-bias-pll";};reg_bldo2: bldo2 {regulator-always-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-name = "vcc-efuse-pcie-hdmi-io";};reg_bldo3: bldo3 {regulator-always-on;regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-name = "vcc-dcxoio";};bldo4 {/* unused */};reg_cldo1: cldo1 {regulator-always-on;regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc-3v3";};reg_cldo2: cldo2 {regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc-wifi-1";};reg_cldo3: cldo3 {regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-name = "vcc-wifi-2";};reg_dcdca: dcdca {regulator-always-on;regulator-min-microvolt = <810000>;regulator-max-microvolt = <1080000>;regulator-name = "vdd-cpu";};reg_dcdcc: dcdcc {regulator-min-microvolt = <810000>;regulator-max-microvolt = <1080000>;regulator-name = "vdd-gpu";};reg_dcdcd: dcdcd {regulator-always-on;regulator-min-microvolt = <960000>;regulator-max-microvolt = <960000>;regulator-name = "vdd-sys";};reg_dcdce: dcdce {regulator-always-on;regulator-min-microvolt = <1200000>;regulator-max-microvolt = <1200000>;regulator-name = "vcc-dram";};sw {/* unused */};};};+};
+&uart0 {
pinctrl-names = "default";pinctrl-0 = <&uart0_ph_pins>;status = "okay";+}; diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig new file mode 100644 index 0000000000..ef4dd29549 --- /dev/null +++ b/configs/beelink_gs1_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I_H6=y +CONFIG_MMC0_CD_PIN="PF6" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# CONFIG_PSCI_RESET is not set +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1" +CONFIG_LED=y +CONFIG_LED_GPIO=y
Seems like most of Allwinner gpio's are gpio-leds. so select LED (since it's dm led core) in arch/arm/Kconfig if LED_GPIO. I'm thinking this could be proper assignment.
We can't do that as LED_GPIO depends on LED.
True.