Nuno João (Ext_NBS) wrote:
From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] On Behalf Of Hurricane555 Sent: terça-feira, 6 de Junho de 2006 8:48 To: u-boot-users@lists.sourceforge.net Subject: Re: [U-Boot-Users] Error: end address not on sector boundary
Now I changed my settings as follows:
#define PHYS_FLASH_SIZE 0x000400000 /* 4 MB */ ...
This is mine:
#define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SECT_SIZE 0x40000 /* 256K (one sector) for env */ #define CFG_ENV_SIZE CFG_ENV_SECT_SIZE #define CFG_ENV_ADDR 0xffe00000
I have a 256KB sized-sector flash, u-boot (512KB) at 0xFFF80000 (at the end of flash) and the environment at 0xFFE00000 (1 sector).
Now I can make saveenv, but after restart the bootloader is damaged!
This probably means that you're setting your environment to overlap u-boot's flash area. Check your memory map and (re-)read the file README in u-boot's root directory about the environment's configuration defines.
U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
Hmmmm.... I see what my mistake was! My ENV was on the same address like U-BOOT!
U-BOOT is now on address 50000000. The ENV on 50010000!
I checked this address and I was clear! No data was on it, so I thougt I could use the section for my ENV. But when I make saveenv the bootloader is dead!? Why? -- View this message in context: http://www.nabble.com/Error%3A-end-address-not-on-sector-boundary-t1731654.h... Sent from the Uboot - Users forum at Nabble.com.