From: Sonic Zhang sonic.zhang@analog.com
Wait data transfer till the data end bit other than the data block end bit is set.
Signed-off-by: Sonic Zhang sonic.zhang@analog.com ---
drivers/mmc/bfin_sdh.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index bcd6a3e..9bdfbbc 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -138,9 +138,9 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) if (data->flags & MMC_DATA_WRITE) return UNUSABLE_ERR; #ifndef RSI_BLKSZ - data_ctl |= ((ffs(data_size) - 1) << 4); + data_ctl |= ((ffs(data->blocksize) - 1) << 4); #else - bfin_write_SDH_BLK_SIZE(data_size); + bfin_write_SDH_BLK_SIZE(data->blocksize); #endif data_ctl |= DTX_DIR; bfin_write_SDH_DATA_CTL(data_ctl); @@ -189,7 +189,8 @@ static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd, do { udelay(1); status = bfin_read_SDH_STATUS(); - } while (!(status & (DAT_BLK_END | DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | RX_OVERRUN))); + } while (!(status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL | + RX_OVERRUN)));
if (status & DAT_TIME_OUT) { bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT);