The following series of patches add support for the following - Kconfig symbol for giving the load address for ATF - USB Mass storage boot mode in AM642-EVM - DFU boot mode in AM642-EVM - Host and peripheral modes for AM642-EVM in U-Boot - Set the USB PHY core voltage to 0.85V
changes since v1, - Corrected the default load address of ATF to 0x70000000
Aswath Govindraju (10): tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol arm: mach-k3: am642_init: Add support for USB boot mode arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modes board: ti: am64x: Set the core voltage of USB PHY to 0.85V arm: dts: k3-am64-main: Add USB DT nodes arm: dts: k3-am642-*-evm: Add USB support arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to peripheral for USB subsystem configs: am64x_evm_*_defconfig: Move the SPL Load address to 0x70000000, move the ATF to a latter location and rearrange EEPROM and BSS data arm: dts: k3-am64-main: Update the location of ATF in SRAM configs: am64: Enable configs to support USB host and device modes
arch/arm/dts/k3-am64-main.dtsi | 32 ++++++++++++- arch/arm/dts/k3-am642-evm-u-boot.dtsi | 13 ++++++ arch/arm/dts/k3-am642-evm.dts | 18 ++++++++ arch/arm/dts/k3-am642-r5-evm.dts | 18 ++++++++ arch/arm/mach-k3/Kconfig | 7 +++ arch/arm/mach-k3/am642_init.c | 46 ++++++++++++++++++- arch/arm/mach-k3/config.mk | 1 + arch/arm/mach-k3/include/mach/am64_hardware.h | 11 +++-- arch/arm/mach-k3/include/mach/am64_spl.h | 6 ++- board/ti/am64x/evm.c | 14 ++++++ configs/am64x_evm_a53_defconfig | 40 ++++++++++++++++ configs/am64x_evm_r5_defconfig | 38 +++++++++++++-- include/configs/am64x_evm.h | 15 +++++- tools/k3_fit_atf.sh | 9 ++-- 14 files changed, 251 insertions(+), 17 deletions(-)