Keep pad control definitions together, and organize definitions in a more legible way.
Signed-off-by: Benoît Thébaudeau benoit.thebaudeau@advansee.com --- arch/arm/include/asm/imx-common/iomux-v3.h | 33 ++++++++++++++++------------ 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 87d849a..6b58381 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -86,31 +86,29 @@ typedef u64 iomux_v3_cfg_t; ((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \ ((iomux_v3_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT))
+#define __NA_ 0x000 +#define NO_MUX_I 0 +#define NO_PAD_I 0 + #define NO_PAD_CTRL (1 << 17) -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) -#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) -#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) -#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) -#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) -#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) -#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
#ifdef CONFIG_MX6
#define PAD_CTL_HYS (1 << 16) + #define PAD_CTL_PUS_100K_DOWN (0 << 14) #define PAD_CTL_PUS_47K_UP (1 << 14) #define PAD_CTL_PUS_100K_UP (2 << 14) #define PAD_CTL_PUS_22K_UP (3 << 14) - #define PAD_CTL_PUE (1 << 13) #define PAD_CTL_PKE (1 << 12) + #define PAD_CTL_ODE (1 << 11) + #define PAD_CTL_SPEED_LOW (1 << 6) #define PAD_CTL_SPEED_MED (2 << 6) #define PAD_CTL_SPEED_HIGH (3 << 6) + #define PAD_CTL_DSE_DISABLE (0 << 3) #define PAD_CTL_DSE_240ohm (1 << 3) #define PAD_CTL_DSE_120ohm (2 << 3) @@ -142,13 +140,20 @@ typedef u64 iomux_v3_cfg_t;
#endif
-#define PAD_CTL_SRE_FAST (1 << 0) #define PAD_CTL_SRE_SLOW (0 << 0) +#define PAD_CTL_SRE_FAST (1 << 0)
#define IOMUX_CONFIG_SION 0x10 -#define __NA_ 0x000 -#define NO_MUX_I 0 -#define NO_PAD_I 0 + +#define GPIO_PIN_MASK 0x1f +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,