In pci_uclass_pre_probe an attempt is made to detect whether the parent of a device is a PCI device and that the device is thus a bridge. This was being done by checking whether the parent of the device is of the UCLASS_ROOT class. This causes problems if the PCI controller is a child of some other non-PCI node, for example a simple-bus node.
For example, if the device tree contains something like the following then pci_uclass_pre_probe would incorrectly believe that the PCI controller is a bridge, with a PCI parent:
/ { some_child { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <>;
pci_controller: pci@10000000 { compatible = "my-pci-controller"; device_type = "pci"; reg = <0x10000000 0x2000000>; }; }; };
Avoid this incorrect detection of bridges by instead checking whether the parent devices class is UCLASS_PCI and treating a device as a bridge when this is true.
Signed-off-by: Paul Burton paul.burton@imgtec.com ---
drivers/pci/pci-uclass.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index 32590ce..ca277f3 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -859,7 +859,7 @@ static int pci_uclass_pre_probe(struct udevice *bus) hose = bus->uclass_priv;
/* For bridges, use the top-level PCI controller */ - if (device_get_uclass_id(bus->parent) == UCLASS_ROOT) { + if (device_get_uclass_id(bus->parent) != UCLASS_PCI) { hose->ctlr = bus; ret = decode_regions(hose, gd->fdt_blob, bus->parent->of_offset, bus->of_offset);