On 2/10/23 22:08, Tony Dinh wrote:
When DM_SERIAL is enabled, the device-tree tag u-boot,dm-pre-reloc is required for this board to boot over UART with kwboot. Enable this in kirkwood-pogoplug-series-4-u-boot.dtsi.
Signed-off-by: Tony Dinh mibodhi@gmail.com
Reviewed-by: Stefan Roese sr@denx.de
Thanks, Stefan
arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi new file mode 100644 index 0000000000..f9e127234c --- /dev/null +++ b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2023 Tony Dinh mibodhi@gmail.com
- */
+&uart0 {
- u-boot,dm-pre-reloc;
+};
Viele Grüße, Stefan Roese