Re: [U-Boot] Bug in new at91 clock framework?

I'm working on git://git.denx.de/u-boot-at91.git branch clock I also have an AT91SAM9263-EK, but with a 16.0 MHz main oscillator. Everything is fine, as long as no changes were made. But if I undef CONFIG_USB_ATMEL and CONFIG_CMD_USB, the board does not boot. Only some cryptical characters appear after the "RomBOOT" term. It's the same behavior as on my own board.

use git://git.denx.de/u-boot-at91.git branch master

Best Regards, J.