This adds platform code for the FriendlyElec NanoPi K2 board based on a Meson GXBB (S905) SoC with the Meson GXBB configuration.
This initial submission only supports: - UART - MMC/SDCard - Ethernet - Reset Controller - Clock controller
A sync with Linux 4.17 to get the device tree is also necessary.
Neil Armstrong (1): ARM: dts: sync meson-gxbb-nanopi-k2 from Linux 4.17
Thomas McKahan (1): boards: amlogic: Add FriendlyElec NanoPi K2 board support
arch/arm/dts/Makefile | 2 + arch/arm/dts/meson-gxbb-nanopi-k2.dts | 323 ++++++++++++++++++++++++++++++++++ arch/arm/mach-meson/Kconfig | 8 + board/amlogic/nanopi-k2/Kconfig | 12 ++ board/amlogic/nanopi-k2/MAINTAINERS | 6 + board/amlogic/nanopi-k2/Makefile | 7 + board/amlogic/nanopi-k2/README | 99 +++++++++++ board/amlogic/nanopi-k2/nanopi-k2.c | 61 +++++++ configs/nanopi-k2_defconfig | 40 +++++ include/configs/nanopi-k2.h | 18 ++ 10 files changed, 576 insertions(+) create mode 100644 arch/arm/dts/meson-gxbb-nanopi-k2.dts create mode 100644 board/amlogic/nanopi-k2/Kconfig create mode 100644 board/amlogic/nanopi-k2/MAINTAINERS create mode 100644 board/amlogic/nanopi-k2/Makefile create mode 100644 board/amlogic/nanopi-k2/README create mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c create mode 100644 configs/nanopi-k2_defconfig create mode 100644 include/configs/nanopi-k2.h