Hi Albert,
On 22.10.2011 02:31, Albert ARIBAUD wrote:
Hi Vladimir,
Le 18/10/2011 17:55, Vladimir Zapolskiy a écrit :
This change adds initial support for NXP LPC32x0 SoC series.
Signed-off-by: Vladimir Zapolskiyvz@mleia.com
Changes from v2 to v3:
- checkpatch.pl reports zero errors and warnings
Changes from v1 to v2:
- BIT(n) and SBF(s, v) macro are not used anymore
- removed NS16550 and 14-clock UART definitions from uart.h
- added devices.c file, which contains standard UART preinitialization
routine
- added get_serial_clock() function, it returns actual frequency of
UART clock
- __udelay() realization is simplified, no need of interrupt handling
As it stands, this is dead code until some board uses it; I imagine you have board waiting for this support. Can you submit the SoC and board code as a patch set? This way, it will be obvious for all that the SoC code in this patch has actual use.
you're right, I have a board to make support for. However I presume that U-boot maintainers won't be happy to include a board with CONFIG_ENV_IS_NOWHERE, and unfortunately flash driver isn't yet ready for publishing.
I'd like to get an advice, if you think that weakly supported but working U-boot on the board has chances to be included to arm-next I can send the patchset right now for review, otherwise I'll spend some time (one week approximately) to finish NAND driver.