Re: [U-Boot] dm video question

Hi Peng,

On 15 August 2016 at 04:05, Peng Fan van.freenix@gmail.com wrote:

Hi Simon,

I am trying to coverting mxsfb.c to support dm.

But met the following issue. " mxsfb_lcd_bind: Frame buffer size 200400 Video device 'lcdif@021c8000' cannot allocate frame buffer memory -ensure the device is set up before relocation "

I add "u-boot, dm-pre-reloc" in dts as the following, but no help.

Can you check that you have that property in each node leading to the root also? You can use fdtdump to display the tree.

Did you add a bind() method to handle the pre-relocaiton setup?

&lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl &pinctrl_lcdif_reset>; display = <&display0>; status = "okay"; u-boot,dm-pre-reloc;

    display0: display {
            bits-per-pixel = <16>;
            bus-width = <24>;
            u-boot,dm-pre-reloc;
            status = "okay";

            display-timings {
                    native-mode = <&timing0>;
                    u-boot,dm-pre-reloc;
                    timing0: timing0 {
                    u-boot,dm-pre-reloc;
                    clock-frequency = <9200000>;
                    hactive = <480>;
                    vactive = <272>;
                    hfront-porch = <8>;
                    hback-porch = <4>;
                    hsync-len = <41>;
                    vback-porch = <2>;
                    vfront-porch = <4>;
                    vsync-len = <10>;

                    hsync-active = <0>;
                    vsync-active = <0>;
                    de-active = <1>;
                    pixelclk-active = <0>;
                    };
            };
    };

};

Regards, Simon