This patch adds kconfig option RISCV_SMODE to run u-boot in S-mode. When this opition is enabled we use s<xyz> CSRs instead of m<xyz> CSRs.
It is important to note that there is no equivalent S-mode CSR for misa and mhartid CSRs so we expect M-mode runtime firmware (BBL or equivalent) to emulate misa and mhartid CSR read.
In-future, we will have more patches to avoid accessing misa and mhartid CSRs from S-mode.
Signed-off-by: Anup Patel anup@brainfault.org Reviewed-by: Bin Meng bmeng.cn@gmail.com Tested-by: Bin Meng bmeng.cn@gmail.com --- arch/riscv/Kconfig | 5 +++++ arch/riscv/cpu/start.S | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 3e0af55e71..8f2139ff60 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -55,6 +55,11 @@ config RISCV_ISA_C config RISCV_ISA_A def_bool y
+config RISCV_SMODE + bool "Run in S-Mode" + help + Enable this option to build an U-Boot for RISC-V S-Mode + config 32BIT bool
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S index 5af189b338..e4276e8e19 100644 --- a/arch/riscv/cpu/start.S +++ b/arch/riscv/cpu/start.S @@ -39,10 +39,18 @@ _start: mv s1, a1
la t0, trap_entry +#ifdef CONFIG_RISCV_SMODE + csrw stvec, t0 +#else csrw mtvec, t0 +#endif
/* mask all interrupts */ +#ifdef CONFIG_RISCV_SMODE + csrw sie, zero +#else csrw mie, zero +#endif
/* Enable cache */ jal icache_enable @@ -164,7 +172,11 @@ fix_rela_dyn: */ la t0, trap_entry add t0, t0, t6 +#ifdef CONFIG_RISCV_SMODE + csrw stvec, t0 +#else csrw mtvec, t0 +#endif
clear_bss: la t0, __bss_start /* t0 <- rel __bss_start in FLASH */ @@ -236,17 +248,34 @@ trap_entry: SREG x29, 29*REGBYTES(sp) SREG x30, 30*REGBYTES(sp) SREG x31, 31*REGBYTES(sp) +#ifdef CONFIG_RISCV_SMODE + csrr a0, scause + csrr a1, sepc +#else csrr a0, mcause csrr a1, mepc +#endif mv a2, sp jal handle_trap +#ifdef CONFIG_RISCV_SMODE + csrw sepc, a0 +#else csrw mepc, a0 +#endif
+#ifdef CONFIG_RISCV_SMODE +/* + * Remain in S-mode after sret + */ + li t0, SSTATUS_SPP + csrs sstatus, t0 +#else /* * Remain in M-mode after mret */ li t0, MSTATUS_MPP csrs mstatus, t0 +#endif LREG x1, 1*REGBYTES(sp) LREG x2, 2*REGBYTES(sp) LREG x3, 3*REGBYTES(sp) @@ -279,4 +308,8 @@ trap_entry: LREG x30, 30*REGBYTES(sp) LREG x31, 31*REGBYTES(sp) addi sp, sp, 32*REGBYTES +#ifdef CONFIG_RISCV_SMODE + sret +#else mret +#endif