Hi,
On 4/9/24 17:02, Patrice Chotard wrote:
Instead of using "st,fastboot-gpios" and "st,stm32prog-gpios", declare 2 gpio-keys.
Signed-off-by: Patrice Chotard patrice.chotard@foss.st.com
arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi index 20728f27ee1..5d49b09c35d 100644 --- a/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-scmi-u-boot.dtsi @@ -3,6 +3,7 @@
- Copyright : STMicroelectronics 2022
*/
+#include <dt-bindings/input/linux-event-codes.h> #include "stm32mp15-scmi-u-boot.dtsi"
/ { @@ -16,8 +17,22 @@ u-boot,error-led = "error"; u-boot,mmc-env-partition = "u-boot-env"; st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
st,fastboot-gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
};
gpio-keys {
compatible = "gpio-keys";button-user-1 {label = "User-1";linux,code = <BTN_1>;gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;};button-user-2 {label = "User-2";linux,code = <BTN_2>;gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;};};
led {
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick