[PATCH 1/5] kgdb: Remove unused serial related options

13 Sep 2021

We have a few CONFIG options for KGDB that are not referenced, remove
them.
Signed-off-by: Tom Rini trini@konsulko.com
---
 README                              | 5 -----
 include/configs/MPC8349EMDS.h       | 4 ----
 include/configs/MPC8349EMDS_SDRAM.h | 4 ----
 include/configs/MPC837XERDB.h       | 4 ----
 include/configs/MPC8540ADS.h        | 4 ----
 include/configs/MPC8548CDS.h        | 4 ----
 include/configs/MPC8560ADS.h        | 4 ----
 include/configs/P1010RDB.h          | 4 ----
 include/configs/P2041RDB.h          | 4 ----
 include/configs/T102xRDB.h          | 4 ----
 include/configs/T104xRDB.h          | 4 ----
 include/configs/T208xQDS.h          | 5 -----
 include/configs/T208xRDB.h          | 5 -----
 include/configs/T4240RDB.h          | 4 ----
 include/configs/UCP1020.h           | 5 -----
 include/configs/corenet_ds.h        | 4 ----
 include/configs/p1_p2_rdb_pc.h      | 4 ----
 include/configs/pxa-common.h        | 7 -------
 include/configs/socrates.h          | 4 ----
 include/configs/x86-common.h        | 4 ----
 20 files changed, 87 deletions(-)

diff --git a/README b/README
index 6df06c79bc83..e9a6df4cd1de 100644
--- a/README
+++ b/README
@@ -648,11 +648,6 @@ The following options need to be configured:
    	time on others. This setting #define's the initial
    	value of the "loads_echo" environment variable.
-- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
-		CONFIG_KGDB_BAUDRATE
-		Select one of the baudrates listed in
-		CONFIG_SYS_BAUDRATE_TABLE, see below.
-
 - Removal of commands
    	If no commands are needed to boot, you can disable
    	CONFIG_CMDLINE to remove them. In this case, the command line
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 2f1fc6a6a2b9..d96d3ce6967b 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -255,10 +255,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #endif
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
index d6a151d20ce6..0f8db35ae90e 100644
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -312,10 +312,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #endif
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 0e2e034dcd9b..ce810e5f2cbe 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -323,10 +323,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 66cf2053f980..b73a7c9ac955 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -289,10 +289,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index f7d05ffa89a1..5c54bad4964f 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -415,10 +415,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 224314366439..23ac9f8e6ece 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -279,10 +279,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 02b0b71ada56..922f0661aba2 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -619,10 +619,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 6da44e7ab828..1e75066eb1c9 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -466,10 +466,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 3ae8a14c9445..e4629946ddb1 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -584,10 +584,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 910baef00c47..7c48c3af71fc 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -592,10 +592,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Dynamic MTD Partition support with mtdparts
  */
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 315d1f7b01a5..57640acfc90b 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -585,11 +585,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 6824be9e758f..6f27386d2bac 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -540,11 +540,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 54db021ec9ad..b7cbf87d3062 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -214,10 +214,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
index 22b8c3f4e012..fceccc6d52a6 100644
--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@@ -386,11 +386,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 2a0a6beaf629..e311ced14bc1 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -466,10 +466,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory map for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 49dbbf07f889..58336110568c 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -597,10 +597,6 @@
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Memory for Linux*/
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
 /*
  * Environment Configuration
  */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
index 52d77e06acf4..7a78f98eb15f 100644
--- a/include/configs/pxa-common.h
+++ b/include/configs/pxa-common.h
@@ -8,13 +8,6 @@
 #ifndef	__CONFIG_PXA_COMMON_H__
 #define	__CONFIG_PXA_COMMON_H__
-/*
- * KGDB
- */
-#ifdef	CONFIG_CMD_KGDB
-#define	CONFIG_KGDB_BAUDRATE		230400
-#endif
-
 /*
  * OHCI USB
  */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 400cea479ef9..018bc6918ce7 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -203,10 +203,6 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#endif
-
#define	CONFIG_EXTRA_ENV_SETTINGS					\
    "netdev=eth0\0"							\
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 4b39faababd3..486b5ca77658 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -44,10 +44,6 @@
    "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000"
 #endif
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE			115200
-#endif
-
 /*
  * Miscellaneous configurable options
  */
-- 
2.17.1


    