On Thu, Oct 14, 2004 at 08:46:16PM +0530, ravi.aloor@wipro.com wrote:
Hi, I am new to u-boot. I have few doubts. A brief explanation about my working environment:
- ARM11 based target board, having its own IP address
- PC running on RedHat Linux-8.0, having its own IP address
- BDI2000, having its own IP address
- PC and BDI2000 are connected to the network (IP address for BDI2000 is 192.168.226.159)
- U-boot is already available on target board in the flash
memory
- Firmware is already available on BDI2000
- BDI2000 is connected to the target board through
- Using gdb-6.1 configured with --target=arm-linux
The following are my doubts:
- I want to debug u-boot. So to start debugging u-boot, Do I need to
use bare target board that does not contain u-boot already ?
- I could not start debugging u-boot. So I started debugging kernel
with the target board that already contains u-boot. Please check the following:
[ravi@localhost 2.6_kernel]$ /home/ravi/gdb-6.1/temp/gdb/gdb vmlinux GNU gdb 6.1 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-linux"... (gdb) (gdb) target remote 192.168.226.159:2001 192.168.226.159:2001: Connection refused. (gdb) target remote bdi:2001 bdi:2001: Connection refused.
Based on that response, I would guess that your BDI2000 is not yet configured and connected to the target yet, i.e. the BDI2000 has not successfully detected any target CPU on the JTAG chain. Try using `telnet 192.168.226.159` to see what's going on with the BDI2000. Also, try referring to the BDI manual for help configuring the BDI and, of course, talk to your processor/board vendor to resolve BDI setup/config details. Does the BDI2000 even support ARM11 based processors yet?
-- Regards, George
(gdb) quit [ravi@localhost 2.6_kernel]$
Please help me ... Thanks A Lot In Advance, Ravi
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users