[U-Boot] [PATCH v2 40/58] mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig

Migrate the BR/OR settings to Kconfig. These must be known at compile time, so cannot be configured via DT.

Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these.

Signed-off-by: Mario Six mario.six@gdsys.cc

---

v1 -> v2: No changes

--- arch/powerpc/cpu/mpc83xx/Kconfig | 1 + arch/powerpc/cpu/mpc83xx/cpu_init.c | 1 + arch/powerpc/cpu/mpc83xx/elbc/Kconfig | 32 ++ arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 | 733 ++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 | 733 ++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 | 733 ++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 | 733 ++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 | 733 ++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc83xx/elbc/elbc.h | 186 +++++++ arch/powerpc/cpu/mpc83xx/spl_minimal.c | 1 + arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 4 + board/freescale/mpc8349itx/mpc8349itx.c | 1 + configs/MPC8308RDB_defconfig | 38 ++ configs/MPC8313ERDB_33_defconfig | 50 ++ configs/MPC8313ERDB_66_defconfig | 50 ++ configs/MPC8313ERDB_NAND_33_defconfig | 50 ++ configs/MPC8313ERDB_NAND_66_defconfig | 50 ++ configs/MPC8315ERDB_defconfig | 27 + configs/MPC8323ERDB_defconfig | 14 + configs/MPC832XEMDS_ATM_defconfig | 53 ++ configs/MPC832XEMDS_HOST_33_defconfig | 53 ++ configs/MPC832XEMDS_HOST_66_defconfig | 53 ++ configs/MPC832XEMDS_SLAVE_defconfig | 53 ++ configs/MPC832XEMDS_defconfig | 53 ++ configs/MPC8349EMDS_PCI64_defconfig | 24 + configs/MPC8349EMDS_SDRAM_defconfig | 27 + configs/MPC8349EMDS_SLAVE_defconfig | 24 + configs/MPC8349EMDS_defconfig | 24 + configs/MPC8349ITXGP_defconfig | 47 ++ configs/MPC8349ITX_LOWBOOT_defconfig | 47 ++ configs/MPC8349ITX_defconfig | 47 ++ configs/MPC837XEMDS_HOST_defconfig | 41 ++ configs/MPC837XEMDS_SLAVE_defconfig | 41 ++ configs/MPC837XEMDS_defconfig | 41 ++ configs/MPC837XERDB_SLAVE_defconfig | 36 ++ configs/MPC837XERDB_defconfig | 36 ++ configs/TQM834x_defconfig | 10 + configs/caddy2_defconfig | 21 + configs/hrcon_defconfig | 26 + configs/hrcon_dh_defconfig | 26 + configs/ids8313_defconfig | 45 ++ configs/kmcoge5ne_defconfig | 42 ++ configs/kmeter1_defconfig | 32 ++ configs/kmopti2_defconfig | 42 ++ configs/kmsupx5_defconfig | 34 ++ configs/kmtegr1_defconfig | 30 ++ configs/kmtepr2_defconfig | 42 ++ configs/kmvect1_defconfig | 37 ++ configs/mpc8308_p1m_defconfig | 29 ++ configs/sbc8349_PCI_33_defconfig | 14 + configs/sbc8349_PCI_66_defconfig | 14 + configs/sbc8349_defconfig | 14 + configs/strider_con_defconfig | 23 + configs/strider_con_dp_defconfig | 23 + configs/strider_cpu_defconfig | 23 + configs/strider_cpu_dp_defconfig | 23 + configs/suvd3_defconfig | 37 ++ configs/tuge1_defconfig | 34 ++ configs/tuxx1_defconfig | 45 ++ configs/ve8313_defconfig | 45 ++ configs/vme8349_defconfig | 21 + drivers/mtd/nand/raw/fsl_elbc_spl.c | 4 + include/configs/MPC8308RDB.h | 9 - include/configs/MPC8313ERDB_NAND.h | 14 - include/configs/MPC8313ERDB_NOR.h | 14 - include/configs/MPC8315ERDB.h | 6 - include/configs/MPC8323ERDB.h | 3 - include/configs/MPC832XEMDS.h | 12 - include/configs/MPC8349EMDS.h | 6 - include/configs/MPC8349EMDS_SDRAM.h | 12 - include/configs/MPC8349ITX.h | 12 - include/configs/MPC837XEMDS.h | 9 - include/configs/MPC837XERDB.h | 9 - include/configs/TQM834x.h | 3 - include/configs/caddy2.h | 6 - include/configs/hrcon.h | 6 - include/configs/ids8313.h | 12 - include/configs/kmcoge5ne.h | 12 - include/configs/kmeter1.h | 9 - include/configs/kmopti2.h | 12 - include/configs/kmsupx5.h | 9 - include/configs/kmtegr1.h | 9 - include/configs/kmtepr2.h | 12 - include/configs/kmvect1.h | 12 - include/configs/mpc8308_p1m.h | 9 - include/configs/sbc8349.h | 3 - include/configs/strider.h | 6 - include/configs/suvd3.h | 12 - include/configs/tuge1.h | 9 - include/configs/tuxx1.h | 12 - include/configs/ve8313.h | 12 - include/configs/vme8349.h | 6 - 92 files changed, 5606 insertions(+), 277 deletions(-) create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/Kconfig create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 create mode 100644 arch/powerpc/cpu/mpc83xx/elbc/elbc.h

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 8c84196b978..474572f245e 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -285,6 +285,7 @@ config ARCH_MPC837X source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig" source "arch/powerpc/cpu/mpc83xx/bats/Kconfig" source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig"

menu "Legacy options"

diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 91451e7b304..5ce7b794b26 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -13,6 +13,7 @@ #endif

#include "lblaw/lblaw.h" +#include "elbc/elbc.h"

DECLARE_GLOBAL_DATA_PTR;

diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig new file mode 100644 index 00000000000..74c4ff3ed43 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig @@ -0,0 +1,32 @@ +menu "ELBC register setup" + +choice + prompt "OR/BR for NAND SPL" + +config ELBC_BR_OR_NAND_PRELIM_NONE + bool "None" + +config ELBC_BR_OR_NAND_PRELIM_0 + bool "0" + +config ELBC_BR_OR_NAND_PRELIM_1 + bool "1" + +config ELBC_BR_OR_NAND_PRELIM_2 + bool "2" + +config ELBC_BR_OR_NAND_PRELIM_3 + bool "3" + +config ELBC_BR_OR_NAND_PRELIM_4 + bool "4" + +endchoice + +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4" + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 new file mode 100644 index 00000000000..23e81ab0bf9 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR0_OR0 + bool "ELBC BR0/OR0" + +if ELBC_BR0_OR0 + +config BR0_OR0_NAME + string "Identifier" + +config BR0_OR0_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR0_PORTSIZE_8BIT + bool "8-bit" + +config BR0_PORTSIZE_16BIT + depends on !BR0_MACHINE_FCM + bool "16-bit" + + +config BR0_PORTSIZE_32BIT + depends on !BR0_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR0_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR0_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR0_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR0_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR0_WRITE_PROTECT + bool "Write-protect" + +config BR0_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR0_MACHINE_GPCM + bool "GPCM" + +config BR0_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR0_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR0_MACHINE_UPMA + select BR0_MACHINE_UPM + bool "UPM (A)" + +config BR0_MACHINE_UPMB + select BR0_MACHINE_UPM + bool "UPM (B)" + +config BR0_MACHINE_UPMC + select BR0_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR0_ATOMIC_NONE + bool "No atomic operations" + +config BR0_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR0_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR0_MACHINE_GPCM || BR0_MACHINE_FCM || BR0_MACHINE_UPM || BR0_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR0_AM_32_KBYTES + depends on !BR0_MACHINE_SDRAM + bool "32 kb" + +config OR0_AM_64_KBYTES + bool "64 kb" + +config OR0_AM_128_KBYTES + bool "128 kb" + +config OR0_AM_256_KBYTES + bool "256 kb" + +config OR0_AM_512_KBYTES + bool "512 kb" + +config OR0_AM_1_MBYTES + bool "1 mb" + +config OR0_AM_2_MBYTES + bool "2 mb" + +config OR0_AM_4_MBYTES + bool "4 mb" + +config OR0_AM_8_MBYTES + bool "8 mb" + +config OR0_AM_16_MBYTES + bool "16 mb" + +config OR0_AM_32_MBYTES + bool "32 mb" + +config OR0_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_256_MBYTES + bool "256 mb" + +config OR0_AM_512_MBYTES + depends on BR0_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_1_GBYTES + bool "1 gb" + +config OR0_AM_2_GBYTES + depends on BR0_MACHINE_FCM + bool "2 gb" + +config OR0_AM_4_GBYTES + depends on BR0_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR0_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR0_BCTLD_ASSERTED + bool "Asserted" + +config OR0_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR0_MACHINE_GPCM || BR0_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR0_SCY_0 + bool "No wait states" + +config OR0_SCY_1 + bool "1 wait state" + +config OR0_SCY_2 + bool "2 wait states" + +config OR0_SCY_3 + bool "3 wait states" + +config OR0_SCY_4 + bool "4 wait states" + +config OR0_SCY_5 + bool "5 wait states" + +config OR0_SCY_6 + bool "6 wait states" + +config OR0_SCY_7 + bool "7 wait states" + +config OR0_SCY_8 + depends on BR0_MACHINE_GPCM + bool "8 wait states" + +config OR0_SCY_9 + depends on BR0_MACHINE_GPCM + bool "9 wait states" + +config OR0_SCY_10 + depends on BR0_MACHINE_GPCM + bool "10 wait states" + +config OR0_SCY_11 + depends on BR0_MACHINE_GPCM + bool "11 wait states" + +config OR0_SCY_12 + depends on BR0_MACHINE_GPCM + bool "12 wait states" + +config OR0_SCY_13 + depends on BR0_MACHINE_GPCM + bool "13 wait states" + +config OR0_SCY_14 + depends on BR0_MACHINE_GPCM + bool "14 wait states" + +config OR0_SCY_15 + depends on BR0_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR0_MACHINE_GPCM || BR0_MACHINE_FCM + +if BR0_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR0_CSNT_NORMAL + bool "Normal" + +config OR0_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR0_ACS_SAME_TIME + bool "At the same time" + +config OR0_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR0_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR0_XACS_NORMAL + bool "Normal" + +config OR0_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR0_SETA_INTERNAL + bool "Access is terminated internally" + +config OR0_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR0_MACHINE_GPCM + +if BR0_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR0_PGS_SMALL + bool "Small page device" + +config OR0_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR0_CSCT_1_CYCLE + depends on OR0_TRLX_NORMAL + bool "1 cycle" + +config OR0_CSCT_2_CYCLE + depends on OR0_TRLX_RELAXED + bool "2 cycles" + +config OR0_CSCT_4_CYCLE + depends on OR0_TRLX_NORMAL + bool "4 cycles" + +config OR0_CSCT_8_CYCLE + depends on OR0_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR0_CST_COINCIDENT + depends on OR0_TRLX_NORMAL + bool "Coincident with any command" + +config OR0_CST_QUARTER_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.25 clocks after" + +config OR0_CST_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "0.5 clocks after" + +config OR0_CST_ONE_CLOCK + depends on OR0_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR0_CHT_HALF_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.5 clocks before" + +config OR0_CHT_ONE_CLOCK + depends on OR0_TRLX_NORMAL + bool "1 clock before" + +config OR0_CHT_ONE_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "1.5 clocks before" + +config OR0_CHT_TWO_CLOCK + depends on OR0_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR0_RST_THREE_QUARTER_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR0_RST_ONE_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR0_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR0_MACHINE_FCM + +if BR0_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR0_BI_BURSTSUPPORT + bool "Support burst access" + +config OR0_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR0_MACHINE_UPM + +if BR0_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR0_COLS_7 + bool "7" + +config OR0_COLS_8 + bool "8" + +config OR0_COLS_9 + bool "9" + +config OR0_COLS_10 + bool "10" + +config OR0_COLS_11 + bool "11" + +config OR0_COLS_12 + bool "12" + +config OR0_COLS_13 + bool "13" + +config OR0_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR0_ROWS_9 + bool "9" + +config OR0_ROWS_10 + bool "10" + +config OR0_ROWS_11 + bool "11" + +config OR0_ROWS_12 + bool "12" + +config OR0_ROWS_13 + bool "13" + +config OR0_ROWS_14 + bool "14" + +config OR0_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR0_PMSEL_BTB + bool "Back-to-back" + +config OR0_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR0_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR0_TRLX_NORMAL + bool "Normal" + +config OR0_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR0_EHTR_NORMAL + depends on OR0_TRLX_NORMAL + bool "Normal" + +config OR0_EHTR_1_CYCLE + depends on OR0_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR0_EHTR_4_CYCLE + depends on OR0_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR0_EHTR_8_CYCLE + depends on OR0_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR0_EAD_NONE + bool "None" + +config OR0_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR0_OR0 + +config BR0_PORTSIZE + hex + default 0x800 if BR0_PORTSIZE_8BIT + default 0x1000 if BR0_PORTSIZE_16BIT + default 0x1800 if BR0_PORTSIZE_32BIT + +config BR0_ERRORCHECKING + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if BR0_ERRORCHECKING_DISABLED + default 0x200 if BR0_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR0_ERRORCHECKING_BOTH + +config BR0_WRITE_PROTECT_BIT + hex + default 0x0 if !BR0_WRITE_PROTECT + default 0x100 if BR0_WRITE_PROTECT + +config BR0_MACHINE + hex + default 0x0 if BR0_MACHINE_GPCM + default 0x20 if BR0_MACHINE_FCM + default 0x60 if BR0_MACHINE_SDRAM + default 0x80 if BR0_MACHINE_UPMA + default 0xa0 if BR0_MACHINE_UPMB + default 0xc0 if BR0_MACHINE_UPMC + +config BR0_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR0_ATOMIC_NONE + default 0x4 if BR0_ATOMIC_RAWA + default 0x8 if BR0_ATOMIC_WARA + +config BR0_VALID_BIT + hex + default 0x0 if !ELBC_BR0_OR0 + default 0x1 if ELBC_BR0_OR0 + +config OR0_AM + hex + default 0xffff8000 if OR0_AM_32_KBYTES && !BR0_MACHINE_SDRAM + default 0xffff0000 if OR0_AM_64_KBYTES + default 0xfffe0000 if OR0_AM_128_KBYTES + default 0xfffc0000 if OR0_AM_256_KBYTES + default 0xfff80000 if OR0_AM_512_KBYTES + default 0xfff00000 if OR0_AM_1_MBYTES + default 0xffe00000 if OR0_AM_2_MBYTES + default 0xffc00000 if OR0_AM_4_MBYTES + default 0xff800000 if OR0_AM_8_MBYTES + default 0xff000000 if OR0_AM_16_MBYTES + default 0xfe000000 if OR0_AM_32_MBYTES + default 0xfc000000 if OR0_AM_64_MBYTES + default 0xf8000000 if OR0_AM_128_MBYTES + default 0xf0000000 if OR0_AM_256_MBYTES + default 0xe0000000 if OR0_AM_512_MBYTES + default 0xc0000000 if OR0_AM_1_GBYTES + default 0x80000000 if OR0_AM_2_GBYTES + default 0x00000000 if OR0_AM_4_GBYTES + +config OR0_XAM + hex + default 0x0 if !OR0_XAM_SET + default 0x6000 if OR0_XAM_SET + +config OR0_BCTLD + hex + default 0x0 if OR0_BCTLD_ASSERTED + default 0x1000 if OR0_BCTLD_NOT_ASSERTED + +config OR0_BI + hex + default 0x0 if !BR0_MACHINE_UPM + default 0x0 if OR0_BI_BURSTSUPPORT + default 0x100 if OR0_BI_BURSTINHIBIT + +config OR0_COLS + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_COLS_7 + default 0x400 if OR0_COLS_8 + default 0x800 if OR0_COLS_9 + default 0xc00 if OR0_COLS_10 + default 0x1000 if OR0_COLS_11 + default 0x1400 if OR0_COLS_12 + default 0x1800 if OR0_COLS_13 + default 0x1c00 if OR0_COLS_14 + +config OR0_ROWS + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_ROWS_9 + default 0x40 if OR0_ROWS_10 + default 0x80 if OR0_ROWS_11 + default 0xc0 if OR0_ROWS_12 + default 0x100 if OR0_ROWS_13 + default 0x140 if OR0_ROWS_14 + default 0x180 if OR0_ROWS_15 + +config OR0_PMSEL + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_PMSEL_BTB + default 0x20 if OR0_PMSEL_KEPT_OPEN + +config OR0_SCY + hex + default 0x0 if !BR0_MACHINE_GPCM && !BR0_MACHINE_FCM + default 0x0 if OR0_SCY_0 + default 0x10 if OR0_SCY_1 + default 0x20 if OR0_SCY_2 + default 0x30 if OR0_SCY_3 + default 0x40 if OR0_SCY_4 + default 0x50 if OR0_SCY_5 + default 0x60 if OR0_SCY_6 + default 0x70 if OR0_SCY_7 + default 0x80 if OR0_SCY_8 + default 0x90 if OR0_SCY_9 + default 0xa0 if OR0_SCY_10 + default 0xb0 if OR0_SCY_11 + default 0xc0 if OR0_SCY_12 + default 0xd0 if OR0_SCY_13 + default 0xe0 if OR0_SCY_14 + default 0xf0 if OR0_SCY_15 + +config OR0_PGS + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_PGS_SMALL + default 0x400 if OR0_PGS_LARGE + +config OR0_CSCT + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CSCT_1_CYCLE + default 0x0 if OR0_CSCT_2_CYCLE + default 0x200 if OR0_CSCT_4_CYCLE + default 0x200 if OR0_CSCT_8_CYCLE + +config OR0_CST + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CST_COINCIDENT + default 0x100 if OR0_CST_QUARTER_CLOCK + default 0x0 if OR0_CST_HALF_CLOCK + default 0x100 if OR0_CST_ONE_CLOCK + +config OR0_CHT + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CHT_HALF_CLOCK + default 0x80 if OR0_CHT_ONE_CLOCK + default 0x0 if OR0_CHT_ONE_HALF_CLOCK + default 0x80 if OR0_CHT_TWO_CLOCK + +config OR0_RST + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_RST_THREE_QUARTER_CLOCK + default 0x8 if OR0_RST_ONE_CLOCK + default 0x0 if OR0_RST_ONE_HALF_CLOCK + +config OR0_CSNT + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_CSNT_NORMAL + default 0x800 if OR0_CSNT_EARLIER + +config OR0_ACS + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_ACS_SAME_TIME + default 0x400 if OR0_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR0_ACS_HALF_CYCLE_EARLIER + +config OR0_XACS + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_XACS_NORMAL + default 0x100 if OR0_XACS_EXTENDED + +config OR0_SETA + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_SETA_INTERNAL + default 0x8 if OR0_SETA_EXTERNAL + +config OR0_TRLX + hex + default 0x0 if OR0_TRLX_NORMAL + default 0x4 if OR0_TRLX_RELAXED + +config OR0_EHTR + hex + default 0x0 if OR0_EHTR_NORMAL + default 0x2 if OR0_EHTR_1_CYCLE + default 0x0 if OR0_EHTR_4_CYCLE + default 0x2 if OR0_EHTR_8_CYCLE + +config OR0_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR0_EAD_NONE + default 0x1 if OR0_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 new file mode 100644 index 00000000000..08dcc7dd2ba --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR1_OR1 + bool "ELBC BR1/OR1" + +if ELBC_BR1_OR1 + +config BR1_OR1_NAME + string "Identifier" + +config BR1_OR1_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR1_PORTSIZE_8BIT + bool "8-bit" + +config BR1_PORTSIZE_16BIT + depends on !BR1_MACHINE_FCM + bool "16-bit" + + +config BR1_PORTSIZE_32BIT + depends on !BR1_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR1_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR1_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR1_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR1_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR1_WRITE_PROTECT + bool "Write-protect" + +config BR1_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR1_MACHINE_GPCM + bool "GPCM" + +config BR1_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR1_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR1_MACHINE_UPMA + select BR1_MACHINE_UPM + bool "UPM (A)" + +config BR1_MACHINE_UPMB + select BR1_MACHINE_UPM + bool "UPM (B)" + +config BR1_MACHINE_UPMC + select BR1_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR1_ATOMIC_NONE + bool "No atomic operations" + +config BR1_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR1_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR1_MACHINE_GPCM || BR1_MACHINE_FCM || BR1_MACHINE_UPM || BR1_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR1_AM_32_KBYTES + depends on !BR1_MACHINE_SDRAM + bool "32 kb" + +config OR1_AM_64_KBYTES + bool "64 kb" + +config OR1_AM_128_KBYTES + bool "128 kb" + +config OR1_AM_256_KBYTES + bool "256 kb" + +config OR1_AM_512_KBYTES + bool "512 kb" + +config OR1_AM_1_MBYTES + bool "1 mb" + +config OR1_AM_2_MBYTES + bool "2 mb" + +config OR1_AM_4_MBYTES + bool "4 mb" + +config OR1_AM_8_MBYTES + bool "8 mb" + +config OR1_AM_16_MBYTES + bool "16 mb" + +config OR1_AM_32_MBYTES + bool "32 mb" + +config OR1_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_256_MBYTES + bool "256 mb" + +config OR1_AM_512_MBYTES + depends on BR1_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_1_GBYTES + bool "1 gb" + +config OR1_AM_2_GBYTES + depends on BR1_MACHINE_FCM + bool "2 gb" + +config OR1_AM_4_GBYTES + depends on BR1_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR1_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR1_BCTLD_ASSERTED + bool "Asserted" + +config OR1_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR1_MACHINE_GPCM || BR1_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR1_SCY_0 + bool "No wait states" + +config OR1_SCY_1 + bool "1 wait state" + +config OR1_SCY_2 + bool "2 wait states" + +config OR1_SCY_3 + bool "3 wait states" + +config OR1_SCY_4 + bool "4 wait states" + +config OR1_SCY_5 + bool "5 wait states" + +config OR1_SCY_6 + bool "6 wait states" + +config OR1_SCY_7 + bool "7 wait states" + +config OR1_SCY_8 + depends on BR1_MACHINE_GPCM + bool "8 wait states" + +config OR1_SCY_9 + depends on BR1_MACHINE_GPCM + bool "9 wait states" + +config OR1_SCY_10 + depends on BR1_MACHINE_GPCM + bool "10 wait states" + +config OR1_SCY_11 + depends on BR1_MACHINE_GPCM + bool "11 wait states" + +config OR1_SCY_12 + depends on BR1_MACHINE_GPCM + bool "12 wait states" + +config OR1_SCY_13 + depends on BR1_MACHINE_GPCM + bool "13 wait states" + +config OR1_SCY_14 + depends on BR1_MACHINE_GPCM + bool "14 wait states" + +config OR1_SCY_15 + depends on BR1_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR1_MACHINE_GPCM || BR1_MACHINE_FCM + +if BR1_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR1_CSNT_NORMAL + bool "Normal" + +config OR1_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR1_ACS_SAME_TIME + bool "At the same time" + +config OR1_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR1_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR1_XACS_NORMAL + bool "Normal" + +config OR1_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR1_SETA_INTERNAL + bool "Access is terminated internally" + +config OR1_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR1_MACHINE_GPCM + +if BR1_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR1_PGS_SMALL + bool "Small page device" + +config OR1_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR1_CSCT_1_CYCLE + depends on OR1_TRLX_NORMAL + bool "1 cycle" + +config OR1_CSCT_2_CYCLE + depends on OR1_TRLX_RELAXED + bool "2 cycles" + +config OR1_CSCT_4_CYCLE + depends on OR1_TRLX_NORMAL + bool "4 cycles" + +config OR1_CSCT_8_CYCLE + depends on OR1_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR1_CST_COINCIDENT + depends on OR1_TRLX_NORMAL + bool "Coincident with any command" + +config OR1_CST_QUARTER_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.25 clocks after" + +config OR1_CST_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "0.5 clocks after" + +config OR1_CST_ONE_CLOCK + depends on OR1_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR1_CHT_HALF_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.5 clocks before" + +config OR1_CHT_ONE_CLOCK + depends on OR1_TRLX_NORMAL + bool "1 clock before" + +config OR1_CHT_ONE_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "1.5 clocks before" + +config OR1_CHT_TWO_CLOCK + depends on OR1_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR1_RST_THREE_QUARTER_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR1_RST_ONE_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR1_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR1_MACHINE_FCM + +if BR1_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR1_BI_BURSTSUPPORT + bool "Support burst access" + +config OR1_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR1_MACHINE_UPM + +if BR1_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR1_COLS_7 + bool "7" + +config OR1_COLS_8 + bool "8" + +config OR1_COLS_9 + bool "9" + +config OR1_COLS_10 + bool "10" + +config OR1_COLS_11 + bool "11" + +config OR1_COLS_12 + bool "12" + +config OR1_COLS_13 + bool "13" + +config OR1_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR1_ROWS_9 + bool "9" + +config OR1_ROWS_10 + bool "10" + +config OR1_ROWS_11 + bool "11" + +config OR1_ROWS_12 + bool "12" + +config OR1_ROWS_13 + bool "13" + +config OR1_ROWS_14 + bool "14" + +config OR1_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR1_PMSEL_BTB + bool "Back-to-back" + +config OR1_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR1_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR1_TRLX_NORMAL + bool "Normal" + +config OR1_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR1_EHTR_NORMAL + depends on OR1_TRLX_NORMAL + bool "Normal" + +config OR1_EHTR_1_CYCLE + depends on OR1_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR1_EHTR_4_CYCLE + depends on OR1_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR1_EHTR_8_CYCLE + depends on OR1_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR1_EAD_NONE + bool "None" + +config OR1_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR1_OR1 + +config BR1_PORTSIZE + hex + default 0x800 if BR1_PORTSIZE_8BIT + default 0x1000 if BR1_PORTSIZE_16BIT + default 0x1800 if BR1_PORTSIZE_32BIT + +config BR1_ERRORCHECKING + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if BR1_ERRORCHECKING_DISABLED + default 0x200 if BR1_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR1_ERRORCHECKING_BOTH + +config BR1_WRITE_PROTECT_BIT + hex + default 0x0 if !BR1_WRITE_PROTECT + default 0x100 if BR1_WRITE_PROTECT + +config BR1_MACHINE + hex + default 0x0 if BR1_MACHINE_GPCM + default 0x20 if BR1_MACHINE_FCM + default 0x60 if BR1_MACHINE_SDRAM + default 0x80 if BR1_MACHINE_UPMA + default 0xa0 if BR1_MACHINE_UPMB + default 0xc0 if BR1_MACHINE_UPMC + +config BR1_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR1_ATOMIC_NONE + default 0x4 if BR1_ATOMIC_RAWA + default 0x8 if BR1_ATOMIC_WARA + +config BR1_VALID_BIT + hex + default 0x0 if !ELBC_BR1_OR1 + default 0x1 if ELBC_BR1_OR1 + +config OR1_AM + hex + default 0xffff8000 if OR1_AM_32_KBYTES && !BR1_MACHINE_SDRAM + default 0xffff0000 if OR1_AM_64_KBYTES + default 0xfffe0000 if OR1_AM_128_KBYTES + default 0xfffc0000 if OR1_AM_256_KBYTES + default 0xfff80000 if OR1_AM_512_KBYTES + default 0xfff00000 if OR1_AM_1_MBYTES + default 0xffe00000 if OR1_AM_2_MBYTES + default 0xffc00000 if OR1_AM_4_MBYTES + default 0xff800000 if OR1_AM_8_MBYTES + default 0xff000000 if OR1_AM_16_MBYTES + default 0xfe000000 if OR1_AM_32_MBYTES + default 0xfc000000 if OR1_AM_64_MBYTES + default 0xf8000000 if OR1_AM_128_MBYTES + default 0xf0000000 if OR1_AM_256_MBYTES + default 0xe0000000 if OR1_AM_512_MBYTES + default 0xc0000000 if OR1_AM_1_GBYTES + default 0x80000000 if OR1_AM_2_GBYTES + default 0x00000000 if OR1_AM_4_GBYTES + +config OR1_XAM + hex + default 0x0 if !OR1_XAM_SET + default 0x6000 if OR1_XAM_SET + +config OR1_BCTLD + hex + default 0x0 if OR1_BCTLD_ASSERTED + default 0x1000 if OR1_BCTLD_NOT_ASSERTED + +config OR1_BI + hex + default 0x0 if !BR1_MACHINE_UPM + default 0x0 if OR1_BI_BURSTSUPPORT + default 0x100 if OR1_BI_BURSTINHIBIT + +config OR1_COLS + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_COLS_7 + default 0x400 if OR1_COLS_8 + default 0x800 if OR1_COLS_9 + default 0xc00 if OR1_COLS_10 + default 0x1000 if OR1_COLS_11 + default 0x1400 if OR1_COLS_12 + default 0x1800 if OR1_COLS_13 + default 0x1c00 if OR1_COLS_14 + +config OR1_ROWS + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_ROWS_9 + default 0x40 if OR1_ROWS_10 + default 0x80 if OR1_ROWS_11 + default 0xc0 if OR1_ROWS_12 + default 0x100 if OR1_ROWS_13 + default 0x140 if OR1_ROWS_14 + default 0x180 if OR1_ROWS_15 + +config OR1_PMSEL + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_PMSEL_BTB + default 0x20 if OR1_PMSEL_KEPT_OPEN + +config OR1_SCY + hex + default 0x0 if !BR1_MACHINE_GPCM && !BR1_MACHINE_FCM + default 0x0 if OR1_SCY_0 + default 0x10 if OR1_SCY_1 + default 0x20 if OR1_SCY_2 + default 0x30 if OR1_SCY_3 + default 0x40 if OR1_SCY_4 + default 0x50 if OR1_SCY_5 + default 0x60 if OR1_SCY_6 + default 0x70 if OR1_SCY_7 + default 0x80 if OR1_SCY_8 + default 0x90 if OR1_SCY_9 + default 0xa0 if OR1_SCY_10 + default 0xb0 if OR1_SCY_11 + default 0xc0 if OR1_SCY_12 + default 0xd0 if OR1_SCY_13 + default 0xe0 if OR1_SCY_14 + default 0xf0 if OR1_SCY_15 + +config OR1_PGS + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_PGS_SMALL + default 0x400 if OR1_PGS_LARGE + +config OR1_CSCT + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CSCT_1_CYCLE + default 0x0 if OR1_CSCT_2_CYCLE + default 0x200 if OR1_CSCT_4_CYCLE + default 0x200 if OR1_CSCT_8_CYCLE + +config OR1_CST + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CST_COINCIDENT + default 0x100 if OR1_CST_QUARTER_CLOCK + default 0x0 if OR1_CST_HALF_CLOCK + default 0x100 if OR1_CST_ONE_CLOCK + +config OR1_CHT + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CHT_HALF_CLOCK + default 0x80 if OR1_CHT_ONE_CLOCK + default 0x0 if OR1_CHT_ONE_HALF_CLOCK + default 0x80 if OR1_CHT_TWO_CLOCK + +config OR1_RST + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_RST_THREE_QUARTER_CLOCK + default 0x8 if OR1_RST_ONE_CLOCK + default 0x0 if OR1_RST_ONE_HALF_CLOCK + +config OR1_CSNT + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_CSNT_NORMAL + default 0x800 if OR1_CSNT_EARLIER + +config OR1_ACS + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_ACS_SAME_TIME + default 0x400 if OR1_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR1_ACS_HALF_CYCLE_EARLIER + +config OR1_XACS + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_XACS_NORMAL + default 0x100 if OR1_XACS_EXTENDED + +config OR1_SETA + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_SETA_INTERNAL + default 0x8 if OR1_SETA_EXTERNAL + +config OR1_TRLX + hex + default 0x0 if OR1_TRLX_NORMAL + default 0x4 if OR1_TRLX_RELAXED + +config OR1_EHTR + hex + default 0x0 if OR1_EHTR_NORMAL + default 0x2 if OR1_EHTR_1_CYCLE + default 0x0 if OR1_EHTR_4_CYCLE + default 0x2 if OR1_EHTR_8_CYCLE + +config OR1_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR1_EAD_NONE + default 0x1 if OR1_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 new file mode 100644 index 00000000000..298d87f5e0f --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR2_OR2 + bool "ELBC BR2/OR2" + +if ELBC_BR2_OR2 + +config BR2_OR2_NAME + string "Identifier" + +config BR2_OR2_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR2_PORTSIZE_8BIT + bool "8-bit" + +config BR2_PORTSIZE_16BIT + depends on !BR2_MACHINE_FCM + bool "16-bit" + + +config BR2_PORTSIZE_32BIT + depends on !BR2_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR2_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR2_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR2_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR2_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR2_WRITE_PROTECT + bool "Write-protect" + +config BR2_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR2_MACHINE_GPCM + bool "GPCM" + +config BR2_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR2_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR2_MACHINE_UPMA + select BR2_MACHINE_UPM + bool "UPM (A)" + +config BR2_MACHINE_UPMB + select BR2_MACHINE_UPM + bool "UPM (B)" + +config BR2_MACHINE_UPMC + select BR2_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR2_ATOMIC_NONE + bool "No atomic operations" + +config BR2_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR2_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR2_MACHINE_GPCM || BR2_MACHINE_FCM || BR2_MACHINE_UPM || BR2_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR2_AM_32_KBYTES + depends on !BR2_MACHINE_SDRAM + bool "32 kb" + +config OR2_AM_64_KBYTES + bool "64 kb" + +config OR2_AM_128_KBYTES + bool "128 kb" + +config OR2_AM_256_KBYTES + bool "256 kb" + +config OR2_AM_512_KBYTES + bool "512 kb" + +config OR2_AM_1_MBYTES + bool "1 mb" + +config OR2_AM_2_MBYTES + bool "2 mb" + +config OR2_AM_4_MBYTES + bool "4 mb" + +config OR2_AM_8_MBYTES + bool "8 mb" + +config OR2_AM_16_MBYTES + bool "16 mb" + +config OR2_AM_32_MBYTES + bool "32 mb" + +config OR2_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_256_MBYTES + bool "256 mb" + +config OR2_AM_512_MBYTES + depends on BR2_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_1_GBYTES + bool "1 gb" + +config OR2_AM_2_GBYTES + depends on BR2_MACHINE_FCM + bool "2 gb" + +config OR2_AM_4_GBYTES + depends on BR2_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR2_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR2_BCTLD_ASSERTED + bool "Asserted" + +config OR2_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR2_MACHINE_GPCM || BR2_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR2_SCY_0 + bool "No wait states" + +config OR2_SCY_1 + bool "1 wait state" + +config OR2_SCY_2 + bool "2 wait states" + +config OR2_SCY_3 + bool "3 wait states" + +config OR2_SCY_4 + bool "4 wait states" + +config OR2_SCY_5 + bool "5 wait states" + +config OR2_SCY_6 + bool "6 wait states" + +config OR2_SCY_7 + bool "7 wait states" + +config OR2_SCY_8 + depends on BR2_MACHINE_GPCM + bool "8 wait states" + +config OR2_SCY_9 + depends on BR2_MACHINE_GPCM + bool "9 wait states" + +config OR2_SCY_10 + depends on BR2_MACHINE_GPCM + bool "10 wait states" + +config OR2_SCY_11 + depends on BR2_MACHINE_GPCM + bool "11 wait states" + +config OR2_SCY_12 + depends on BR2_MACHINE_GPCM + bool "12 wait states" + +config OR2_SCY_13 + depends on BR2_MACHINE_GPCM + bool "13 wait states" + +config OR2_SCY_14 + depends on BR2_MACHINE_GPCM + bool "14 wait states" + +config OR2_SCY_15 + depends on BR2_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR2_MACHINE_GPCM || BR2_MACHINE_FCM + +if BR2_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR2_CSNT_NORMAL + bool "Normal" + +config OR2_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR2_ACS_SAME_TIME + bool "At the same time" + +config OR2_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR2_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR2_XACS_NORMAL + bool "Normal" + +config OR2_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR2_SETA_INTERNAL + bool "Access is terminated internally" + +config OR2_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR2_MACHINE_GPCM + +if BR2_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR2_PGS_SMALL + bool "Small page device" + +config OR2_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR2_CSCT_1_CYCLE + depends on OR2_TRLX_NORMAL + bool "1 cycle" + +config OR2_CSCT_2_CYCLE + depends on OR2_TRLX_RELAXED + bool "2 cycles" + +config OR2_CSCT_4_CYCLE + depends on OR2_TRLX_NORMAL + bool "4 cycles" + +config OR2_CSCT_8_CYCLE + depends on OR2_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR2_CST_COINCIDENT + depends on OR2_TRLX_NORMAL + bool "Coincident with any command" + +config OR2_CST_QUARTER_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.25 clocks after" + +config OR2_CST_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "0.5 clocks after" + +config OR2_CST_ONE_CLOCK + depends on OR2_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR2_CHT_HALF_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.5 clocks before" + +config OR2_CHT_ONE_CLOCK + depends on OR2_TRLX_NORMAL + bool "1 clock before" + +config OR2_CHT_ONE_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "1.5 clocks before" + +config OR2_CHT_TWO_CLOCK + depends on OR2_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR2_RST_THREE_QUARTER_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR2_RST_ONE_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR2_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR2_MACHINE_FCM + +if BR2_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR2_BI_BURSTSUPPORT + bool "Support burst access" + +config OR2_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR2_MACHINE_UPM + +if BR2_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR2_COLS_7 + bool "7" + +config OR2_COLS_8 + bool "8" + +config OR2_COLS_9 + bool "9" + +config OR2_COLS_10 + bool "10" + +config OR2_COLS_11 + bool "11" + +config OR2_COLS_12 + bool "12" + +config OR2_COLS_13 + bool "13" + +config OR2_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR2_ROWS_9 + bool "9" + +config OR2_ROWS_10 + bool "10" + +config OR2_ROWS_11 + bool "11" + +config OR2_ROWS_12 + bool "12" + +config OR2_ROWS_13 + bool "13" + +config OR2_ROWS_14 + bool "14" + +config OR2_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR2_PMSEL_BTB + bool "Back-to-back" + +config OR2_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR2_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR2_TRLX_NORMAL + bool "Normal" + +config OR2_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR2_EHTR_NORMAL + depends on OR2_TRLX_NORMAL + bool "Normal" + +config OR2_EHTR_1_CYCLE + depends on OR2_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR2_EHTR_4_CYCLE + depends on OR2_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR2_EHTR_8_CYCLE + depends on OR2_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR2_EAD_NONE + bool "None" + +config OR2_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR2_OR2 + +config BR2_PORTSIZE + hex + default 0x800 if BR2_PORTSIZE_8BIT + default 0x1000 if BR2_PORTSIZE_16BIT + default 0x1800 if BR2_PORTSIZE_32BIT + +config BR2_ERRORCHECKING + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if BR2_ERRORCHECKING_DISABLED + default 0x200 if BR2_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR2_ERRORCHECKING_BOTH + +config BR2_WRITE_PROTECT_BIT + hex + default 0x0 if !BR2_WRITE_PROTECT + default 0x100 if BR2_WRITE_PROTECT + +config BR2_MACHINE + hex + default 0x0 if BR2_MACHINE_GPCM + default 0x20 if BR2_MACHINE_FCM + default 0x60 if BR2_MACHINE_SDRAM + default 0x80 if BR2_MACHINE_UPMA + default 0xa0 if BR2_MACHINE_UPMB + default 0xc0 if BR2_MACHINE_UPMC + +config BR2_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR2_ATOMIC_NONE + default 0x4 if BR2_ATOMIC_RAWA + default 0x8 if BR2_ATOMIC_WARA + +config BR2_VALID_BIT + hex + default 0x0 if !ELBC_BR2_OR2 + default 0x1 if ELBC_BR2_OR2 + +config OR2_AM + hex + default 0xffff8000 if OR2_AM_32_KBYTES && !BR2_MACHINE_SDRAM + default 0xffff0000 if OR2_AM_64_KBYTES + default 0xfffe0000 if OR2_AM_128_KBYTES + default 0xfffc0000 if OR2_AM_256_KBYTES + default 0xfff80000 if OR2_AM_512_KBYTES + default 0xfff00000 if OR2_AM_1_MBYTES + default 0xffe00000 if OR2_AM_2_MBYTES + default 0xffc00000 if OR2_AM_4_MBYTES + default 0xff800000 if OR2_AM_8_MBYTES + default 0xff000000 if OR2_AM_16_MBYTES + default 0xfe000000 if OR2_AM_32_MBYTES + default 0xfc000000 if OR2_AM_64_MBYTES + default 0xf8000000 if OR2_AM_128_MBYTES + default 0xf0000000 if OR2_AM_256_MBYTES + default 0xe0000000 if OR2_AM_512_MBYTES + default 0xc0000000 if OR2_AM_1_GBYTES + default 0x80000000 if OR2_AM_2_GBYTES + default 0x00000000 if OR2_AM_4_GBYTES + +config OR2_XAM + hex + default 0x0 if !OR2_XAM_SET + default 0x6000 if OR2_XAM_SET + +config OR2_BCTLD + hex + default 0x0 if OR2_BCTLD_ASSERTED + default 0x1000 if OR2_BCTLD_NOT_ASSERTED + +config OR2_BI + hex + default 0x0 if !BR2_MACHINE_UPM + default 0x0 if OR2_BI_BURSTSUPPORT + default 0x100 if OR2_BI_BURSTINHIBIT + +config OR2_COLS + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_COLS_7 + default 0x400 if OR2_COLS_8 + default 0x800 if OR2_COLS_9 + default 0xc00 if OR2_COLS_10 + default 0x1000 if OR2_COLS_11 + default 0x1400 if OR2_COLS_12 + default 0x1800 if OR2_COLS_13 + default 0x1c00 if OR2_COLS_14 + +config OR2_ROWS + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_ROWS_9 + default 0x40 if OR2_ROWS_10 + default 0x80 if OR2_ROWS_11 + default 0xc0 if OR2_ROWS_12 + default 0x100 if OR2_ROWS_13 + default 0x140 if OR2_ROWS_14 + default 0x180 if OR2_ROWS_15 + +config OR2_PMSEL + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_PMSEL_BTB + default 0x20 if OR2_PMSEL_KEPT_OPEN + +config OR2_SCY + hex + default 0x0 if !BR2_MACHINE_GPCM && !BR2_MACHINE_FCM + default 0x0 if OR2_SCY_0 + default 0x10 if OR2_SCY_1 + default 0x20 if OR2_SCY_2 + default 0x30 if OR2_SCY_3 + default 0x40 if OR2_SCY_4 + default 0x50 if OR2_SCY_5 + default 0x60 if OR2_SCY_6 + default 0x70 if OR2_SCY_7 + default 0x80 if OR2_SCY_8 + default 0x90 if OR2_SCY_9 + default 0xa0 if OR2_SCY_10 + default 0xb0 if OR2_SCY_11 + default 0xc0 if OR2_SCY_12 + default 0xd0 if OR2_SCY_13 + default 0xe0 if OR2_SCY_14 + default 0xf0 if OR2_SCY_15 + +config OR2_PGS + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_PGS_SMALL + default 0x400 if OR2_PGS_LARGE + +config OR2_CSCT + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CSCT_1_CYCLE + default 0x0 if OR2_CSCT_2_CYCLE + default 0x200 if OR2_CSCT_4_CYCLE + default 0x200 if OR2_CSCT_8_CYCLE + +config OR2_CST + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CST_COINCIDENT + default 0x100 if OR2_CST_QUARTER_CLOCK + default 0x0 if OR2_CST_HALF_CLOCK + default 0x100 if OR2_CST_ONE_CLOCK + +config OR2_CHT + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CHT_HALF_CLOCK + default 0x80 if OR2_CHT_ONE_CLOCK + default 0x0 if OR2_CHT_ONE_HALF_CLOCK + default 0x80 if OR2_CHT_TWO_CLOCK + +config OR2_RST + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_RST_THREE_QUARTER_CLOCK + default 0x8 if OR2_RST_ONE_CLOCK + default 0x0 if OR2_RST_ONE_HALF_CLOCK + +config OR2_CSNT + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_CSNT_NORMAL + default 0x800 if OR2_CSNT_EARLIER + +config OR2_ACS + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_ACS_SAME_TIME + default 0x400 if OR2_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR2_ACS_HALF_CYCLE_EARLIER + +config OR2_XACS + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_XACS_NORMAL + default 0x100 if OR2_XACS_EXTENDED + +config OR2_SETA + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_SETA_INTERNAL + default 0x8 if OR2_SETA_EXTERNAL + +config OR2_TRLX + hex + default 0x0 if OR2_TRLX_NORMAL + default 0x4 if OR2_TRLX_RELAXED + +config OR2_EHTR + hex + default 0x0 if OR2_EHTR_NORMAL + default 0x2 if OR2_EHTR_1_CYCLE + default 0x0 if OR2_EHTR_4_CYCLE + default 0x2 if OR2_EHTR_8_CYCLE + +config OR2_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR2_EAD_NONE + default 0x1 if OR2_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 new file mode 100644 index 00000000000..963831bfcbd --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR3_OR3 + bool "ELBC BR3/OR3" + +if ELBC_BR3_OR3 + +config BR3_OR3_NAME + string "Identifier" + +config BR3_OR3_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR3_PORTSIZE_8BIT + bool "8-bit" + +config BR3_PORTSIZE_16BIT + depends on !BR3_MACHINE_FCM + bool "16-bit" + + +config BR3_PORTSIZE_32BIT + depends on !BR3_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR3_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR3_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR3_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR3_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR3_WRITE_PROTECT + bool "Write-protect" + +config BR3_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR3_MACHINE_GPCM + bool "GPCM" + +config BR3_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR3_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR3_MACHINE_UPMA + select BR3_MACHINE_UPM + bool "UPM (A)" + +config BR3_MACHINE_UPMB + select BR3_MACHINE_UPM + bool "UPM (B)" + +config BR3_MACHINE_UPMC + select BR3_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR3_ATOMIC_NONE + bool "No atomic operations" + +config BR3_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR3_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR3_MACHINE_GPCM || BR3_MACHINE_FCM || BR3_MACHINE_UPM || BR3_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR3_AM_32_KBYTES + depends on !BR3_MACHINE_SDRAM + bool "32 kb" + +config OR3_AM_64_KBYTES + bool "64 kb" + +config OR3_AM_128_KBYTES + bool "128 kb" + +config OR3_AM_256_KBYTES + bool "256 kb" + +config OR3_AM_512_KBYTES + bool "512 kb" + +config OR3_AM_1_MBYTES + bool "1 mb" + +config OR3_AM_2_MBYTES + bool "2 mb" + +config OR3_AM_4_MBYTES + bool "4 mb" + +config OR3_AM_8_MBYTES + bool "8 mb" + +config OR3_AM_16_MBYTES + bool "16 mb" + +config OR3_AM_32_MBYTES + bool "32 mb" + +config OR3_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_256_MBYTES + bool "256 mb" + +config OR3_AM_512_MBYTES + depends on BR3_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_1_GBYTES + bool "1 gb" + +config OR3_AM_2_GBYTES + depends on BR3_MACHINE_FCM + bool "2 gb" + +config OR3_AM_4_GBYTES + depends on BR3_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR3_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR3_BCTLD_ASSERTED + bool "Asserted" + +config OR3_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR3_MACHINE_GPCM || BR3_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR3_SCY_0 + bool "No wait states" + +config OR3_SCY_1 + bool "1 wait state" + +config OR3_SCY_2 + bool "2 wait states" + +config OR3_SCY_3 + bool "3 wait states" + +config OR3_SCY_4 + bool "4 wait states" + +config OR3_SCY_5 + bool "5 wait states" + +config OR3_SCY_6 + bool "6 wait states" + +config OR3_SCY_7 + bool "7 wait states" + +config OR3_SCY_8 + depends on BR3_MACHINE_GPCM + bool "8 wait states" + +config OR3_SCY_9 + depends on BR3_MACHINE_GPCM + bool "9 wait states" + +config OR3_SCY_10 + depends on BR3_MACHINE_GPCM + bool "10 wait states" + +config OR3_SCY_11 + depends on BR3_MACHINE_GPCM + bool "11 wait states" + +config OR3_SCY_12 + depends on BR3_MACHINE_GPCM + bool "12 wait states" + +config OR3_SCY_13 + depends on BR3_MACHINE_GPCM + bool "13 wait states" + +config OR3_SCY_14 + depends on BR3_MACHINE_GPCM + bool "14 wait states" + +config OR3_SCY_15 + depends on BR3_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR3_MACHINE_GPCM || BR3_MACHINE_FCM + +if BR3_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR3_CSNT_NORMAL + bool "Normal" + +config OR3_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR3_ACS_SAME_TIME + bool "At the same time" + +config OR3_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR3_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR3_XACS_NORMAL + bool "Normal" + +config OR3_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR3_SETA_INTERNAL + bool "Access is terminated internally" + +config OR3_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR3_MACHINE_GPCM + +if BR3_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR3_PGS_SMALL + bool "Small page device" + +config OR3_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR3_CSCT_1_CYCLE + depends on OR3_TRLX_NORMAL + bool "1 cycle" + +config OR3_CSCT_2_CYCLE + depends on OR3_TRLX_RELAXED + bool "2 cycles" + +config OR3_CSCT_4_CYCLE + depends on OR3_TRLX_NORMAL + bool "4 cycles" + +config OR3_CSCT_8_CYCLE + depends on OR3_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR3_CST_COINCIDENT + depends on OR3_TRLX_NORMAL + bool "Coincident with any command" + +config OR3_CST_QUARTER_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.25 clocks after" + +config OR3_CST_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "0.5 clocks after" + +config OR3_CST_ONE_CLOCK + depends on OR3_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR3_CHT_HALF_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.5 clocks before" + +config OR3_CHT_ONE_CLOCK + depends on OR3_TRLX_NORMAL + bool "1 clock before" + +config OR3_CHT_ONE_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "1.5 clocks before" + +config OR3_CHT_TWO_CLOCK + depends on OR3_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR3_RST_THREE_QUARTER_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR3_RST_ONE_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR3_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR3_MACHINE_FCM + +if BR3_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR3_BI_BURSTSUPPORT + bool "Support burst access" + +config OR3_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR3_MACHINE_UPM + +if BR3_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR3_COLS_7 + bool "7" + +config OR3_COLS_8 + bool "8" + +config OR3_COLS_9 + bool "9" + +config OR3_COLS_10 + bool "10" + +config OR3_COLS_11 + bool "11" + +config OR3_COLS_12 + bool "12" + +config OR3_COLS_13 + bool "13" + +config OR3_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR3_ROWS_9 + bool "9" + +config OR3_ROWS_10 + bool "10" + +config OR3_ROWS_11 + bool "11" + +config OR3_ROWS_12 + bool "12" + +config OR3_ROWS_13 + bool "13" + +config OR3_ROWS_14 + bool "14" + +config OR3_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR3_PMSEL_BTB + bool "Back-to-back" + +config OR3_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR3_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR3_TRLX_NORMAL + bool "Normal" + +config OR3_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR3_EHTR_NORMAL + depends on OR3_TRLX_NORMAL + bool "Normal" + +config OR3_EHTR_1_CYCLE + depends on OR3_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR3_EHTR_4_CYCLE + depends on OR3_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR3_EHTR_8_CYCLE + depends on OR3_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR3_EAD_NONE + bool "None" + +config OR3_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR3_OR3 + +config BR3_PORTSIZE + hex + default 0x800 if BR3_PORTSIZE_8BIT + default 0x1000 if BR3_PORTSIZE_16BIT + default 0x1800 if BR3_PORTSIZE_32BIT + +config BR3_ERRORCHECKING + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if BR3_ERRORCHECKING_DISABLED + default 0x200 if BR3_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR3_ERRORCHECKING_BOTH + +config BR3_WRITE_PROTECT_BIT + hex + default 0x0 if !BR3_WRITE_PROTECT + default 0x100 if BR3_WRITE_PROTECT + +config BR3_MACHINE + hex + default 0x0 if BR3_MACHINE_GPCM + default 0x20 if BR3_MACHINE_FCM + default 0x60 if BR3_MACHINE_SDRAM + default 0x80 if BR3_MACHINE_UPMA + default 0xa0 if BR3_MACHINE_UPMB + default 0xc0 if BR3_MACHINE_UPMC + +config BR3_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR3_ATOMIC_NONE + default 0x4 if BR3_ATOMIC_RAWA + default 0x8 if BR3_ATOMIC_WARA + +config BR3_VALID_BIT + hex + default 0x0 if !ELBC_BR3_OR3 + default 0x1 if ELBC_BR3_OR3 + +config OR3_AM + hex + default 0xffff8000 if OR3_AM_32_KBYTES && !BR3_MACHINE_SDRAM + default 0xffff0000 if OR3_AM_64_KBYTES + default 0xfffe0000 if OR3_AM_128_KBYTES + default 0xfffc0000 if OR3_AM_256_KBYTES + default 0xfff80000 if OR3_AM_512_KBYTES + default 0xfff00000 if OR3_AM_1_MBYTES + default 0xffe00000 if OR3_AM_2_MBYTES + default 0xffc00000 if OR3_AM_4_MBYTES + default 0xff800000 if OR3_AM_8_MBYTES + default 0xff000000 if OR3_AM_16_MBYTES + default 0xfe000000 if OR3_AM_32_MBYTES + default 0xfc000000 if OR3_AM_64_MBYTES + default 0xf8000000 if OR3_AM_128_MBYTES + default 0xf0000000 if OR3_AM_256_MBYTES + default 0xe0000000 if OR3_AM_512_MBYTES + default 0xc0000000 if OR3_AM_1_GBYTES + default 0x80000000 if OR3_AM_2_GBYTES + default 0x00000000 if OR3_AM_4_GBYTES + +config OR3_XAM + hex + default 0x0 if !OR3_XAM_SET + default 0x6000 if OR3_XAM_SET + +config OR3_BCTLD + hex + default 0x0 if OR3_BCTLD_ASSERTED + default 0x1000 if OR3_BCTLD_NOT_ASSERTED + +config OR3_BI + hex + default 0x0 if !BR3_MACHINE_UPM + default 0x0 if OR3_BI_BURSTSUPPORT + default 0x100 if OR3_BI_BURSTINHIBIT + +config OR3_COLS + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_COLS_7 + default 0x400 if OR3_COLS_8 + default 0x800 if OR3_COLS_9 + default 0xc00 if OR3_COLS_10 + default 0x1000 if OR3_COLS_11 + default 0x1400 if OR3_COLS_12 + default 0x1800 if OR3_COLS_13 + default 0x1c00 if OR3_COLS_14 + +config OR3_ROWS + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_ROWS_9 + default 0x40 if OR3_ROWS_10 + default 0x80 if OR3_ROWS_11 + default 0xc0 if OR3_ROWS_12 + default 0x100 if OR3_ROWS_13 + default 0x140 if OR3_ROWS_14 + default 0x180 if OR3_ROWS_15 + +config OR3_PMSEL + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_PMSEL_BTB + default 0x20 if OR3_PMSEL_KEPT_OPEN + +config OR3_SCY + hex + default 0x0 if !BR3_MACHINE_GPCM && !BR3_MACHINE_FCM + default 0x0 if OR3_SCY_0 + default 0x10 if OR3_SCY_1 + default 0x20 if OR3_SCY_2 + default 0x30 if OR3_SCY_3 + default 0x40 if OR3_SCY_4 + default 0x50 if OR3_SCY_5 + default 0x60 if OR3_SCY_6 + default 0x70 if OR3_SCY_7 + default 0x80 if OR3_SCY_8 + default 0x90 if OR3_SCY_9 + default 0xa0 if OR3_SCY_10 + default 0xb0 if OR3_SCY_11 + default 0xc0 if OR3_SCY_12 + default 0xd0 if OR3_SCY_13 + default 0xe0 if OR3_SCY_14 + default 0xf0 if OR3_SCY_15 + +config OR3_PGS + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_PGS_SMALL + default 0x400 if OR3_PGS_LARGE + +config OR3_CSCT + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CSCT_1_CYCLE + default 0x0 if OR3_CSCT_2_CYCLE + default 0x200 if OR3_CSCT_4_CYCLE + default 0x200 if OR3_CSCT_8_CYCLE + +config OR3_CST + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CST_COINCIDENT + default 0x100 if OR3_CST_QUARTER_CLOCK + default 0x0 if OR3_CST_HALF_CLOCK + default 0x100 if OR3_CST_ONE_CLOCK + +config OR3_CHT + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CHT_HALF_CLOCK + default 0x80 if OR3_CHT_ONE_CLOCK + default 0x0 if OR3_CHT_ONE_HALF_CLOCK + default 0x80 if OR3_CHT_TWO_CLOCK + +config OR3_RST + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_RST_THREE_QUARTER_CLOCK + default 0x8 if OR3_RST_ONE_CLOCK + default 0x0 if OR3_RST_ONE_HALF_CLOCK + +config OR3_CSNT + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_CSNT_NORMAL + default 0x800 if OR3_CSNT_EARLIER + +config OR3_ACS + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_ACS_SAME_TIME + default 0x400 if OR3_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR3_ACS_HALF_CYCLE_EARLIER + +config OR3_XACS + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_XACS_NORMAL + default 0x100 if OR3_XACS_EXTENDED + +config OR3_SETA + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_SETA_INTERNAL + default 0x8 if OR3_SETA_EXTERNAL + +config OR3_TRLX + hex + default 0x0 if OR3_TRLX_NORMAL + default 0x4 if OR3_TRLX_RELAXED + +config OR3_EHTR + hex + default 0x0 if OR3_EHTR_NORMAL + default 0x2 if OR3_EHTR_1_CYCLE + default 0x0 if OR3_EHTR_4_CYCLE + default 0x2 if OR3_EHTR_8_CYCLE + +config OR3_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR3_EAD_NONE + default 0x1 if OR3_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 new file mode 100644 index 00000000000..0063dab9622 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR4_OR4 + bool "ELBC BR4/OR4" + +if ELBC_BR4_OR4 + +config BR4_OR4_NAME + string "Identifier" + +config BR4_OR4_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR4_PORTSIZE_8BIT + bool "8-bit" + +config BR4_PORTSIZE_16BIT + depends on !BR4_MACHINE_FCM + bool "16-bit" + + +config BR4_PORTSIZE_32BIT + depends on !BR4_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR4_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR4_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR4_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR4_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR4_WRITE_PROTECT + bool "Write-protect" + +config BR4_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR4_MACHINE_GPCM + bool "GPCM" + +config BR4_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR4_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR4_MACHINE_UPMA + select BR4_MACHINE_UPM + bool "UPM (A)" + +config BR4_MACHINE_UPMB + select BR4_MACHINE_UPM + bool "UPM (B)" + +config BR4_MACHINE_UPMC + select BR4_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR4_ATOMIC_NONE + bool "No atomic operations" + +config BR4_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR4_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR4_MACHINE_GPCM || BR4_MACHINE_FCM || BR4_MACHINE_UPM || BR4_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR4_AM_32_KBYTES + depends on !BR4_MACHINE_SDRAM + bool "32 kb" + +config OR4_AM_64_KBYTES + bool "64 kb" + +config OR4_AM_128_KBYTES + bool "128 kb" + +config OR4_AM_256_KBYTES + bool "256 kb" + +config OR4_AM_512_KBYTES + bool "512 kb" + +config OR4_AM_1_MBYTES + bool "1 mb" + +config OR4_AM_2_MBYTES + bool "2 mb" + +config OR4_AM_4_MBYTES + bool "4 mb" + +config OR4_AM_8_MBYTES + bool "8 mb" + +config OR4_AM_16_MBYTES + bool "16 mb" + +config OR4_AM_32_MBYTES + bool "32 mb" + +config OR4_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_256_MBYTES + bool "256 mb" + +config OR4_AM_512_MBYTES + depends on BR4_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_1_GBYTES + bool "1 gb" + +config OR4_AM_2_GBYTES + depends on BR4_MACHINE_FCM + bool "2 gb" + +config OR4_AM_4_GBYTES + depends on BR4_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR4_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR4_BCTLD_ASSERTED + bool "Asserted" + +config OR4_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR4_MACHINE_GPCM || BR4_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR4_SCY_0 + bool "No wait states" + +config OR4_SCY_1 + bool "1 wait state" + +config OR4_SCY_2 + bool "2 wait states" + +config OR4_SCY_3 + bool "3 wait states" + +config OR4_SCY_4 + bool "4 wait states" + +config OR4_SCY_5 + bool "5 wait states" + +config OR4_SCY_6 + bool "6 wait states" + +config OR4_SCY_7 + bool "7 wait states" + +config OR4_SCY_8 + depends on BR4_MACHINE_GPCM + bool "8 wait states" + +config OR4_SCY_9 + depends on BR4_MACHINE_GPCM + bool "9 wait states" + +config OR4_SCY_10 + depends on BR4_MACHINE_GPCM + bool "10 wait states" + +config OR4_SCY_11 + depends on BR4_MACHINE_GPCM + bool "11 wait states" + +config OR4_SCY_12 + depends on BR4_MACHINE_GPCM + bool "12 wait states" + +config OR4_SCY_13 + depends on BR4_MACHINE_GPCM + bool "13 wait states" + +config OR4_SCY_14 + depends on BR4_MACHINE_GPCM + bool "14 wait states" + +config OR4_SCY_15 + depends on BR4_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR4_MACHINE_GPCM || BR4_MACHINE_FCM + +if BR4_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR4_CSNT_NORMAL + bool "Normal" + +config OR4_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR4_ACS_SAME_TIME + bool "At the same time" + +config OR4_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR4_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR4_XACS_NORMAL + bool "Normal" + +config OR4_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR4_SETA_INTERNAL + bool "Access is terminated internally" + +config OR4_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR4_MACHINE_GPCM + +if BR4_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR4_PGS_SMALL + bool "Small page device" + +config OR4_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR4_CSCT_1_CYCLE + depends on OR4_TRLX_NORMAL + bool "1 cycle" + +config OR4_CSCT_2_CYCLE + depends on OR4_TRLX_RELAXED + bool "2 cycles" + +config OR4_CSCT_4_CYCLE + depends on OR4_TRLX_NORMAL + bool "4 cycles" + +config OR4_CSCT_8_CYCLE + depends on OR4_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR4_CST_COINCIDENT + depends on OR4_TRLX_NORMAL + bool "Coincident with any command" + +config OR4_CST_QUARTER_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.25 clocks after" + +config OR4_CST_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "0.5 clocks after" + +config OR4_CST_ONE_CLOCK + depends on OR4_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR4_CHT_HALF_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.5 clocks before" + +config OR4_CHT_ONE_CLOCK + depends on OR4_TRLX_NORMAL + bool "1 clock before" + +config OR4_CHT_ONE_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "1.5 clocks before" + +config OR4_CHT_TWO_CLOCK + depends on OR4_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR4_RST_THREE_QUARTER_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR4_RST_ONE_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR4_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR4_MACHINE_FCM + +if BR4_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR4_BI_BURSTSUPPORT + bool "Support burst access" + +config OR4_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR4_MACHINE_UPM + +if BR4_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR4_COLS_7 + bool "7" + +config OR4_COLS_8 + bool "8" + +config OR4_COLS_9 + bool "9" + +config OR4_COLS_10 + bool "10" + +config OR4_COLS_11 + bool "11" + +config OR4_COLS_12 + bool "12" + +config OR4_COLS_13 + bool "13" + +config OR4_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR4_ROWS_9 + bool "9" + +config OR4_ROWS_10 + bool "10" + +config OR4_ROWS_11 + bool "11" + +config OR4_ROWS_12 + bool "12" + +config OR4_ROWS_13 + bool "13" + +config OR4_ROWS_14 + bool "14" + +config OR4_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR4_PMSEL_BTB + bool "Back-to-back" + +config OR4_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR4_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR4_TRLX_NORMAL + bool "Normal" + +config OR4_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR4_EHTR_NORMAL + depends on OR4_TRLX_NORMAL + bool "Normal" + +config OR4_EHTR_1_CYCLE + depends on OR4_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR4_EHTR_4_CYCLE + depends on OR4_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR4_EHTR_8_CYCLE + depends on OR4_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR4_EAD_NONE + bool "None" + +config OR4_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR4_OR4 + +config BR4_PORTSIZE + hex + default 0x800 if BR4_PORTSIZE_8BIT + default 0x1000 if BR4_PORTSIZE_16BIT + default 0x1800 if BR4_PORTSIZE_32BIT + +config BR4_ERRORCHECKING + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if BR4_ERRORCHECKING_DISABLED + default 0x200 if BR4_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR4_ERRORCHECKING_BOTH + +config BR4_WRITE_PROTECT_BIT + hex + default 0x0 if !BR4_WRITE_PROTECT + default 0x100 if BR4_WRITE_PROTECT + +config BR4_MACHINE + hex + default 0x0 if BR4_MACHINE_GPCM + default 0x20 if BR4_MACHINE_FCM + default 0x60 if BR4_MACHINE_SDRAM + default 0x80 if BR4_MACHINE_UPMA + default 0xa0 if BR4_MACHINE_UPMB + default 0xc0 if BR4_MACHINE_UPMC + +config BR4_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR4_ATOMIC_NONE + default 0x4 if BR4_ATOMIC_RAWA + default 0x8 if BR4_ATOMIC_WARA + +config BR4_VALID_BIT + hex + default 0x0 if !ELBC_BR4_OR4 + default 0x1 if ELBC_BR4_OR4 + +config OR4_AM + hex + default 0xffff8000 if OR4_AM_32_KBYTES && !BR4_MACHINE_SDRAM + default 0xffff0000 if OR4_AM_64_KBYTES + default 0xfffe0000 if OR4_AM_128_KBYTES + default 0xfffc0000 if OR4_AM_256_KBYTES + default 0xfff80000 if OR4_AM_512_KBYTES + default 0xfff00000 if OR4_AM_1_MBYTES + default 0xffe00000 if OR4_AM_2_MBYTES + default 0xffc00000 if OR4_AM_4_MBYTES + default 0xff800000 if OR4_AM_8_MBYTES + default 0xff000000 if OR4_AM_16_MBYTES + default 0xfe000000 if OR4_AM_32_MBYTES + default 0xfc000000 if OR4_AM_64_MBYTES + default 0xf8000000 if OR4_AM_128_MBYTES + default 0xf0000000 if OR4_AM_256_MBYTES + default 0xe0000000 if OR4_AM_512_MBYTES + default 0xc0000000 if OR4_AM_1_GBYTES + default 0x80000000 if OR4_AM_2_GBYTES + default 0x00000000 if OR4_AM_4_GBYTES + +config OR4_XAM + hex + default 0x0 if !OR4_XAM_SET + default 0x6000 if OR4_XAM_SET + +config OR4_BCTLD + hex + default 0x0 if OR4_BCTLD_ASSERTED + default 0x1000 if OR4_BCTLD_NOT_ASSERTED + +config OR4_BI + hex + default 0x0 if !BR4_MACHINE_UPM + default 0x0 if OR4_BI_BURSTSUPPORT + default 0x100 if OR4_BI_BURSTINHIBIT + +config OR4_COLS + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_COLS_7 + default 0x400 if OR4_COLS_8 + default 0x800 if OR4_COLS_9 + default 0xc00 if OR4_COLS_10 + default 0x1000 if OR4_COLS_11 + default 0x1400 if OR4_COLS_12 + default 0x1800 if OR4_COLS_13 + default 0x1c00 if OR4_COLS_14 + +config OR4_ROWS + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_ROWS_9 + default 0x40 if OR4_ROWS_10 + default 0x80 if OR4_ROWS_11 + default 0xc0 if OR4_ROWS_12 + default 0x100 if OR4_ROWS_13 + default 0x140 if OR4_ROWS_14 + default 0x180 if OR4_ROWS_15 + +config OR4_PMSEL + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_PMSEL_BTB + default 0x20 if OR4_PMSEL_KEPT_OPEN + +config OR4_SCY + hex + default 0x0 if !BR4_MACHINE_GPCM && !BR4_MACHINE_FCM + default 0x0 if OR4_SCY_0 + default 0x10 if OR4_SCY_1 + default 0x20 if OR4_SCY_2 + default 0x30 if OR4_SCY_3 + default 0x40 if OR4_SCY_4 + default 0x50 if OR4_SCY_5 + default 0x60 if OR4_SCY_6 + default 0x70 if OR4_SCY_7 + default 0x80 if OR4_SCY_8 + default 0x90 if OR4_SCY_9 + default 0xa0 if OR4_SCY_10 + default 0xb0 if OR4_SCY_11 + default 0xc0 if OR4_SCY_12 + default 0xd0 if OR4_SCY_13 + default 0xe0 if OR4_SCY_14 + default 0xf0 if OR4_SCY_15 + +config OR4_PGS + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_PGS_SMALL + default 0x400 if OR4_PGS_LARGE + +config OR4_CSCT + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CSCT_1_CYCLE + default 0x0 if OR4_CSCT_2_CYCLE + default 0x200 if OR4_CSCT_4_CYCLE + default 0x200 if OR4_CSCT_8_CYCLE + +config OR4_CST + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CST_COINCIDENT + default 0x100 if OR4_CST_QUARTER_CLOCK + default 0x0 if OR4_CST_HALF_CLOCK + default 0x100 if OR4_CST_ONE_CLOCK + +config OR4_CHT + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CHT_HALF_CLOCK + default 0x80 if OR4_CHT_ONE_CLOCK + default 0x0 if OR4_CHT_ONE_HALF_CLOCK + default 0x80 if OR4_CHT_TWO_CLOCK + +config OR4_RST + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_RST_THREE_QUARTER_CLOCK + default 0x8 if OR4_RST_ONE_CLOCK + default 0x0 if OR4_RST_ONE_HALF_CLOCK + +config OR4_CSNT + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_CSNT_NORMAL + default 0x800 if OR4_CSNT_EARLIER + +config OR4_ACS + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_ACS_SAME_TIME + default 0x400 if OR4_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR4_ACS_HALF_CYCLE_EARLIER + +config OR4_XACS + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_XACS_NORMAL + default 0x100 if OR4_XACS_EXTENDED + +config OR4_SETA + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_SETA_INTERNAL + default 0x8 if OR4_SETA_EXTERNAL + +config OR4_TRLX + hex + default 0x0 if OR4_TRLX_NORMAL + default 0x4 if OR4_TRLX_RELAXED + +config OR4_EHTR + hex + default 0x0 if OR4_EHTR_NORMAL + default 0x2 if OR4_EHTR_1_CYCLE + default 0x0 if OR4_EHTR_4_CYCLE + default 0x2 if OR4_EHTR_8_CYCLE + +config OR4_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR4_EAD_NONE + default 0x1 if OR4_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/elbc.h b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h new file mode 100644 index 00000000000..245fe7c6fb7 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h @@ -0,0 +1,186 @@ +#ifdef CONFIG_ELBC_BR0_OR0 +#define CONFIG_SYS_BR0_PRELIM (\ + CONFIG_BR0_OR0_BASE |\ + CONFIG_BR0_PORTSIZE |\ + CONFIG_BR0_ERRORCHECKING |\ + CONFIG_BR0_WRITE_PROTECT_BIT |\ + CONFIG_BR0_MACHINE |\ + CONFIG_BR0_ATOMIC |\ + CONFIG_BR0_VALID_BIT \ +) +#define CONFIG_SYS_OR0_PRELIM (\ + CONFIG_OR0_AM |\ + CONFIG_OR0_XAM |\ + CONFIG_OR0_BCTLD |\ + CONFIG_OR0_BI |\ + CONFIG_OR0_COLS |\ + CONFIG_OR0_ROWS |\ + CONFIG_OR0_PMSEL |\ + CONFIG_OR0_SCY |\ + CONFIG_OR0_PGS |\ + CONFIG_OR0_CSCT |\ + CONFIG_OR0_CST |\ + CONFIG_OR0_CHT |\ + CONFIG_OR0_RST |\ + CONFIG_OR0_CSNT |\ + CONFIG_OR0_ACS |\ + CONFIG_OR0_XACS |\ + CONFIG_OR0_SETA |\ + CONFIG_OR0_TRLX |\ + CONFIG_OR0_EHTR |\ + CONFIG_OR0_EAD \ +) +#endif /* CONFIG_ELBC_BR0_OR0 */ + +#ifdef CONFIG_ELBC_BR1_OR1 +#define CONFIG_SYS_BR1_PRELIM (\ + CONFIG_BR1_OR1_BASE |\ + CONFIG_BR1_PORTSIZE |\ + CONFIG_BR1_ERRORCHECKING |\ + CONFIG_BR1_WRITE_PROTECT_BIT |\ + CONFIG_BR1_MACHINE |\ + CONFIG_BR1_ATOMIC |\ + CONFIG_BR1_VALID_BIT \ +) +#define CONFIG_SYS_OR1_PRELIM (\ + CONFIG_OR1_AM |\ + CONFIG_OR1_XAM |\ + CONFIG_OR1_BCTLD |\ + CONFIG_OR1_BI |\ + CONFIG_OR1_COLS |\ + CONFIG_OR1_ROWS |\ + CONFIG_OR1_PMSEL |\ + CONFIG_OR1_SCY |\ + CONFIG_OR1_PGS |\ + CONFIG_OR1_CSCT |\ + CONFIG_OR1_CST |\ + CONFIG_OR1_CHT |\ + CONFIG_OR1_RST |\ + CONFIG_OR1_CSNT |\ + CONFIG_OR1_ACS |\ + CONFIG_OR1_XACS |\ + CONFIG_OR1_SETA |\ + CONFIG_OR1_TRLX |\ + CONFIG_OR1_EHTR |\ + CONFIG_OR1_EAD \ +) +#endif /* CONFIG_ELBC_BR1_OR1 */ + +#ifdef CONFIG_ELBC_BR2_OR2 +#define CONFIG_SYS_BR2_PRELIM (\ + CONFIG_BR2_OR2_BASE |\ + CONFIG_BR2_PORTSIZE |\ + CONFIG_BR2_ERRORCHECKING |\ + CONFIG_BR2_WRITE_PROTECT_BIT |\ + CONFIG_BR2_MACHINE |\ + CONFIG_BR2_ATOMIC |\ + CONFIG_BR2_VALID_BIT \ +) +#define CONFIG_SYS_OR2_PRELIM (\ + CONFIG_OR2_AM |\ + CONFIG_OR2_XAM |\ + CONFIG_OR2_BCTLD |\ + CONFIG_OR2_BI |\ + CONFIG_OR2_COLS |\ + CONFIG_OR2_ROWS |\ + CONFIG_OR2_PMSEL |\ + CONFIG_OR2_SCY |\ + CONFIG_OR2_PGS |\ + CONFIG_OR2_CSCT |\ + CONFIG_OR2_CST |\ + CONFIG_OR2_CHT |\ + CONFIG_OR2_RST |\ + CONFIG_OR2_CSNT |\ + CONFIG_OR2_ACS |\ + CONFIG_OR2_XACS |\ + CONFIG_OR2_SETA |\ + CONFIG_OR2_TRLX |\ + CONFIG_OR2_EHTR |\ + CONFIG_OR2_EAD \ +) +#endif /* CONFIG_ELBC_BR2_OR2 */ + +#ifdef CONFIG_ELBC_BR3_OR3 +#define CONFIG_SYS_BR3_PRELIM (\ + CONFIG_BR3_OR3_BASE |\ + CONFIG_BR3_PORTSIZE |\ + CONFIG_BR3_ERRORCHECKING |\ + CONFIG_BR3_WRITE_PROTECT_BIT |\ + CONFIG_BR3_MACHINE |\ + CONFIG_BR3_ATOMIC |\ + CONFIG_BR3_VALID_BIT \ +) +#define CONFIG_SYS_OR3_PRELIM (\ + CONFIG_OR3_AM |\ + CONFIG_OR3_XAM |\ + CONFIG_OR3_BCTLD |\ + CONFIG_OR3_BI |\ + CONFIG_OR3_COLS |\ + CONFIG_OR3_ROWS |\ + CONFIG_OR3_PMSEL |\ + CONFIG_OR3_SCY |\ + CONFIG_OR3_PGS |\ + CONFIG_OR3_CSCT |\ + CONFIG_OR3_CST |\ + CONFIG_OR3_CHT |\ + CONFIG_OR3_RST |\ + CONFIG_OR3_CSNT |\ + CONFIG_OR3_ACS |\ + CONFIG_OR3_XACS |\ + CONFIG_OR3_SETA |\ + CONFIG_OR3_TRLX |\ + CONFIG_OR3_EHTR |\ + CONFIG_OR3_EAD \ +) +#endif /* CONFIG_ELBC_BR3_OR3 */ + +#ifdef CONFIG_ELBC_BR4_OR4 +#define CONFIG_SYS_BR4_PRELIM (\ + CONFIG_BR4_OR4_BASE |\ + CONFIG_BR4_PORTSIZE |\ + CONFIG_BR4_ERRORCHECKING |\ + CONFIG_BR4_WRITE_PROTECT_BIT |\ + CONFIG_BR4_MACHINE |\ + CONFIG_BR4_ATOMIC |\ + CONFIG_BR4_VALID_BIT \ +) +#define CONFIG_SYS_OR4_PRELIM (\ + CONFIG_OR4_AM |\ + CONFIG_OR4_XAM |\ + CONFIG_OR4_BCTLD |\ + CONFIG_OR4_BI |\ + CONFIG_OR4_COLS |\ + CONFIG_OR4_ROWS |\ + CONFIG_OR4_PMSEL |\ + CONFIG_OR4_SCY |\ + CONFIG_OR4_PGS |\ + CONFIG_OR4_CSCT |\ + CONFIG_OR4_CST |\ + CONFIG_OR4_CHT |\ + CONFIG_OR4_RST |\ + CONFIG_OR4_CSNT |\ + CONFIG_OR4_ACS |\ + CONFIG_OR4_XACS |\ + CONFIG_OR4_SETA |\ + CONFIG_OR4_TRLX |\ + CONFIG_OR4_EHTR |\ + CONFIG_OR4_EAD \ +) +#endif /* CONFIG_ELBC_BR4_OR4 */ + +#if defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_0) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_1) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_2) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR2_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR2_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_3) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR3_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR3_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_4) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR4_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR4_PRELIM +#endif diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 75eb65010ec..b4e2fb1119d 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -7,6 +7,7 @@ #include <mpc83xx.h>

#include "lblaw/lblaw.h" +#include "elbc/elbc.h"

DECLARE_GLOBAL_DATA_PTR;

diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index 13545fc6ad6..c43732f7c5c 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -6,6 +6,10 @@ #include <common.h> #include <asm/fsl_lbc.h>

+#ifdef CONFIG_MPC83xx +#include "../mpc83xx/elbc/elbc.h" +#endif + #ifdef CONFIG_MPC85xx /* Boards should provide their own version of this if they use lbc sdram */ static void __lbc_sdram_init(void) diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index c4bec090be1..62bcf235711 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -20,6 +20,7 @@ #endif

#include "../../../arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h" +#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h"

DECLARE_GLOBAL_DATA_PTR;

diff --git a/configs/MPC8308RDB_defconfig b/configs/MPC8308RDB_defconfig index 38c5d8d5327..c38ac328d2a 100644 --- a/configs/MPC8308RDB_defconfig +++ b/configs/MPC8308RDB_defconfig @@ -86,3 +86,41 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385_BASE" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC8313ERDB_33_defconfig b/configs/MPC8313ERDB_33_defconfig index 5783165e5d1..1588adf3d66 100644 --- a/configs/MPC8313ERDB_33_defconfig +++ b/configs/MPC8313ERDB_33_defconfig @@ -103,3 +103,53 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE2800000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC8313ERDB_66_defconfig b/configs/MPC8313ERDB_66_defconfig index 2395b8e3978..2425256ee30 100644 --- a/configs/MPC8313ERDB_66_defconfig +++ b/configs/MPC8313ERDB_66_defconfig @@ -102,3 +102,53 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE2800000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig index 4c2d3400fdf..c874f6188f7 100644 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ b/configs/MPC8313ERDB_NAND_33_defconfig @@ -110,3 +110,53 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="NAND" +CONFIG_BR0_OR0_BASE=0xE2800000 +CONFIG_BR0_ERRORCHECKING_BOTH=y +CONFIG_BR0_MACHINE_FCM=y +CONFIG_BR0_PORTSIZE_8BIT=y +CONFIG_OR0_AM_32_KBYTES=y +CONFIG_OR0_SCY_1=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_CHT_TWO_CLOCK=y +CONFIG_OR0_CSCT_8_CYCLE=y +CONFIG_OR0_CST_ONE_CLOCK=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FLASH" +CONFIG_BR1_OR1_BASE=0xFE000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_8_MBYTES=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_9=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_EHTR_1_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC8313ERDB_NAND_66_defconfig b/configs/MPC8313ERDB_NAND_66_defconfig index b241091e489..198b373c3e5 100644 --- a/configs/MPC8313ERDB_NAND_66_defconfig +++ b/configs/MPC8313ERDB_NAND_66_defconfig @@ -109,3 +109,53 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="NAND" +CONFIG_BR0_OR0_BASE=0xE2800000 +CONFIG_BR0_ERRORCHECKING_BOTH=y +CONFIG_BR0_MACHINE_FCM=y +CONFIG_BR0_PORTSIZE_8BIT=y +CONFIG_OR0_AM_32_KBYTES=y +CONFIG_OR0_SCY_1=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_CHT_TWO_CLOCK=y +CONFIG_OR0_CSCT_8_CYCLE=y +CONFIG_OR0_CST_ONE_CLOCK=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FLASH" +CONFIG_BR1_OR1_BASE=0xFE000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_8_MBYTES=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_9=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_EHTR_1_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig index b6e43b66aac..b9539893ff7 100644 --- a/configs/MPC8315ERDB_defconfig +++ b/configs/MPC8315ERDB_defconfig @@ -109,3 +109,30 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y diff --git a/configs/MPC8323ERDB_defconfig b/configs/MPC8323ERDB_defconfig index 7243cf67f96..64e6f58f38c 100644 --- a/configs/MPC8323ERDB_defconfig +++ b/configs/MPC8323ERDB_defconfig @@ -88,3 +88,17 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y diff --git a/configs/MPC832XEMDS_ATM_defconfig b/configs/MPC832XEMDS_ATM_defconfig index 8cbc14022b6..ffc82260ec3 100644 --- a/configs/MPC832XEMDS_ATM_defconfig +++ b/configs/MPC832XEMDS_ATM_defconfig @@ -87,3 +87,56 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC832XEMDS_HOST_33_defconfig b/configs/MPC832XEMDS_HOST_33_defconfig index 487d1d85442..911f62de653 100644 --- a/configs/MPC832XEMDS_HOST_33_defconfig +++ b/configs/MPC832XEMDS_HOST_33_defconfig @@ -107,3 +107,56 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC832XEMDS_HOST_66_defconfig b/configs/MPC832XEMDS_HOST_66_defconfig index 10ea03422c7..7dd02a95c92 100644 --- a/configs/MPC832XEMDS_HOST_66_defconfig +++ b/configs/MPC832XEMDS_HOST_66_defconfig @@ -107,3 +107,56 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC832XEMDS_SLAVE_defconfig b/configs/MPC832XEMDS_SLAVE_defconfig index b1afa2fa474..3e3c82b2ef5 100644 --- a/configs/MPC832XEMDS_SLAVE_defconfig +++ b/configs/MPC832XEMDS_SLAVE_defconfig @@ -104,3 +104,56 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC832XEMDS_defconfig b/configs/MPC832XEMDS_defconfig index a9bb8a77139..4cfa01074d1 100644 --- a/configs/MPC832XEMDS_defconfig +++ b/configs/MPC832XEMDS_defconfig @@ -86,3 +86,56 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC8349EMDS_PCI64_defconfig b/configs/MPC8349EMDS_PCI64_defconfig index c0f63f50531..4b42211f1eb 100644 --- a/configs/MPC8349EMDS_PCI64_defconfig +++ b/configs/MPC8349EMDS_PCI64_defconfig @@ -70,3 +70,27 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/MPC8349EMDS_SDRAM_defconfig b/configs/MPC8349EMDS_SDRAM_defconfig index 23c4861777b..bdbe94f4f58 100644 --- a/configs/MPC8349EMDS_SDRAM_defconfig +++ b/configs/MPC8349EMDS_SDRAM_defconfig @@ -57,6 +57,33 @@ CONFIG_LBLAW2=y CONFIG_LBLAW2_BASE=0xF0000000 CONFIG_LBLAW2_NAME="SDRAM" CONFIG_LBLAW2_LENGTH_64_MBYTES=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="SDRAM" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_PORTSIZE_32BIT=y +CONFIG_BR2_MACHINE_SDRAM=y +CONFIG_OR2_COLS_9=y +CONFIG_OR2_ROWS_13=y +CONFIG_OR2_EAD_EXTRA=y CONFIG_PCI_ONE_PCI1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y diff --git a/configs/MPC8349EMDS_SLAVE_defconfig b/configs/MPC8349EMDS_SLAVE_defconfig index 284495cd161..0405efb15d2 100644 --- a/configs/MPC8349EMDS_SLAVE_defconfig +++ b/configs/MPC8349EMDS_SLAVE_defconfig @@ -70,3 +70,27 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/MPC8349EMDS_defconfig b/configs/MPC8349EMDS_defconfig index a38edb52939..e3ca6811ccf 100644 --- a/configs/MPC8349EMDS_defconfig +++ b/configs/MPC8349EMDS_defconfig @@ -76,3 +76,27 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_MPC8XXX_SPI=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig index 844b8973295..cf4ce83307a 100644 --- a/configs/MPC8349ITXGP_defconfig +++ b/configs/MPC8349ITXGP_defconfig @@ -125,3 +125,50 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="VSC7385" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="LED" +CONFIG_BR2_OR2_BASE=0xF9000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_2_MBYTES=y +CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_9=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CF" +CONFIG_BR3_OR3_BASE=0xF0000000 +CONFIG_BR3_MACHINE_UPMA=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BI_BURSTINHIBIT=y diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig index 91ed6686f81..e0185191bc7 100644 --- a/configs/MPC8349ITX_LOWBOOT_defconfig +++ b/configs/MPC8349ITX_LOWBOOT_defconfig @@ -133,3 +133,50 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="VSC7385" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="LED" +CONFIG_BR2_OR2_BASE=0xF9000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_2_MBYTES=y +CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_9=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CF" +CONFIG_BR3_OR3_BASE=0xF0000000 +CONFIG_BR3_MACHINE_UPMA=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BI_BURSTINHIBIT=y diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig index cfa31c72307..0187f4f1280 100644 --- a/configs/MPC8349ITX_defconfig +++ b/configs/MPC8349ITX_defconfig @@ -132,3 +132,50 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="VSC7385" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="LED" +CONFIG_BR2_OR2_BASE=0xF9000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_2_MBYTES=y +CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_9=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CF" +CONFIG_BR3_OR3_BASE=0xF0000000 +CONFIG_BR3_MACHINE_UPMA=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BI_BURSTINHIBIT=y diff --git a/configs/MPC837XEMDS_HOST_defconfig b/configs/MPC837XEMDS_HOST_defconfig index 4cc36a5c7fb..b048d5b5d00 100644 --- a/configs/MPC837XEMDS_HOST_defconfig +++ b/configs/MPC837XEMDS_HOST_defconfig @@ -131,3 +131,44 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="NAND" +CONFIG_BR3_OR3_BASE=0xE0600000 +CONFIG_BR3_ERRORCHECKING_BOTH=y +CONFIG_BR3_MACHINE_FCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BCTLD_NOT_ASSERTED=y +CONFIG_OR3_RST_ONE_CLOCK=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_CHT_TWO_CLOCK=y +CONFIG_OR3_CST_ONE_CLOCK=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC837XEMDS_SLAVE_defconfig b/configs/MPC837XEMDS_SLAVE_defconfig index 33340fb9edb..d0f53dcdc3b 100644 --- a/configs/MPC837XEMDS_SLAVE_defconfig +++ b/configs/MPC837XEMDS_SLAVE_defconfig @@ -82,3 +82,44 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="NAND" +CONFIG_BR3_OR3_BASE=0xE0600000 +CONFIG_BR3_ERRORCHECKING_BOTH=y +CONFIG_BR3_MACHINE_FCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BCTLD_NOT_ASSERTED=y +CONFIG_OR3_RST_ONE_CLOCK=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_CHT_TWO_CLOCK=y +CONFIG_OR3_CST_ONE_CLOCK=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC837XEMDS_defconfig b/configs/MPC837XEMDS_defconfig index b3c1c87824a..9256aac17cd 100644 --- a/configs/MPC837XEMDS_defconfig +++ b/configs/MPC837XEMDS_defconfig @@ -107,3 +107,44 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="NAND" +CONFIG_BR3_OR3_BASE=0xE0600000 +CONFIG_BR3_ERRORCHECKING_BOTH=y +CONFIG_BR3_MACHINE_FCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BCTLD_NOT_ASSERTED=y +CONFIG_OR3_RST_ONE_CLOCK=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_CHT_TWO_CLOCK=y +CONFIG_OR3_CST_ONE_CLOCK=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/MPC837XERDB_SLAVE_defconfig b/configs/MPC837XERDB_SLAVE_defconfig index 98bdc3863f3..914bbb1e0c0 100644 --- a/configs/MPC837XERDB_SLAVE_defconfig +++ b/configs/MPC837XERDB_SLAVE_defconfig @@ -87,3 +87,39 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 59d591fa05b..a8c69eb6bcb 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -133,3 +133,39 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/TQM834x_defconfig b/configs/TQM834x_defconfig index fdaded29704..49f0916663d 100644 --- a/configs/TQM834x_defconfig +++ b/configs/TQM834x_defconfig @@ -134,3 +134,13 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0x80000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_32BIT=y +CONFIG_OR0_AM_1_GBYTES=y +CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y diff --git a/configs/caddy2_defconfig b/configs/caddy2_defconfig index 12721f8db42..e2ea71d11a7 100644 --- a/configs/caddy2_defconfig +++ b/configs/caddy2_defconfig @@ -92,3 +92,24 @@ CONFIG_E1000=y CONFIG_BAUDRATE=9600 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFFC00000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_4_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="WINDOW1" +CONFIG_BR1_OR1_BASE=0xF0000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_32BIT=y +CONFIG_OR1_AM_256_KBYTES=y +CONFIG_OR1_SETA_EXTERNAL=y diff --git a/configs/hrcon_defconfig b/configs/hrcon_defconfig index f1aa24683c0..7b17f602b6d 100644 --- a/configs/hrcon_defconfig +++ b/configs/hrcon_defconfig @@ -89,3 +89,29 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y diff --git a/configs/hrcon_dh_defconfig b/configs/hrcon_dh_defconfig index 22689ef0aca..9a20a0d0690 100644 --- a/configs/hrcon_dh_defconfig +++ b/configs/hrcon_dh_defconfig @@ -87,3 +87,29 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 9f210d82181..91ce1132069 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -118,3 +118,48 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_MPC8XXX_SPI=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_8BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_10=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE1000000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_PGS_LARGE=y +CONFIG_OR1_RST_ONE_CLOCK=y +CONFIG_OR1_SCY_4=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="MRAM" +CONFIG_BR2_OR2_BASE=0xE2000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_SCY_7=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CPLD" +CONFIG_BR3_OR3_BASE=0xE3000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index a09b2fbdf51..0ce39212795 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -142,3 +142,45 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_BCH=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_64_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PAXE" +CONFIG_BR3_OR3_BASE=0xA0000000 +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_2=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_ELBC_BR4_OR4=y +CONFIG_BR4_OR4_NAME="BFTIC3" +CONFIG_BR4_OR4_BASE=0xB0000000 +CONFIG_BR4_PORTSIZE_8BIT=y +CONFIG_OR4_AM_256_MBYTES=y +CONFIG_OR4_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR4_CSNT_EARLIER=y +CONFIG_OR4_EAD_EXTRA=y +CONFIG_OR4_SCY_2=y +CONFIG_OR4_TRLX_RELAXED=y diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 8a245b2a417..1c54cb162d0 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -114,3 +114,35 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_64_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PAXE" +CONFIG_BR3_OR3_BASE=0xA0000000 +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_2=y +CONFIG_OR3_TRLX_RELAXED=y diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index 654fe33da6e..2cd3e9f334b 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -129,3 +129,45 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_SCY_4=y +CONFIG_OR3_EHTR_NORMAL=y diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index 14aaf756b5f..8f81929cdb4 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -115,3 +115,37 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index 3e79eb28563..c07d69d95bb 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -119,3 +119,33 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_BCH=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_SCY_5=y +CONFIG_OR3_EHTR_NORMAL=y diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index 150744daaf6..297d7299f3d 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -129,3 +129,45 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_SCY_4=y +CONFIG_OR3_EHTR_NORMAL=y diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig index 42cd96e6993..e6e3ff9311d 100644 --- a/configs/kmvect1_defconfig +++ b/configs/kmvect1_defconfig @@ -132,3 +132,40 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_UPMA=y +CONFIG_BR2_PORTSIZE_16BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_3=y +CONFIG_OR3_TRLX_RELAXED=y diff --git a/configs/mpc8308_p1m_defconfig b/configs/mpc8308_p1m_defconfig index b44e04e1ae2..ec2e30709ca 100644 --- a/configs/mpc8308_p1m_defconfig +++ b/configs/mpc8308_p1m_defconfig @@ -78,3 +78,32 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFC000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_64_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_4=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="SJA1000" +CONFIG_BR1_OR1_BASE=0xFBFF0000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_EHTR_1_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="CPLD" +CONFIG_BR2_OR2_BASE=0xFBFF8000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_SCY_4=y +CONFIG_OR2_EHTR_1_CYCLE=y diff --git a/configs/sbc8349_PCI_33_defconfig b/configs/sbc8349_PCI_33_defconfig index 6f407d56d56..453f85a0e33 100644 --- a/configs/sbc8349_PCI_33_defconfig +++ b/configs/sbc8349_PCI_33_defconfig @@ -89,3 +89,17 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y diff --git a/configs/sbc8349_PCI_66_defconfig b/configs/sbc8349_PCI_66_defconfig index 9c0b30f446c..b3046156302 100644 --- a/configs/sbc8349_PCI_66_defconfig +++ b/configs/sbc8349_PCI_66_defconfig @@ -89,3 +89,17 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y diff --git a/configs/sbc8349_defconfig b/configs/sbc8349_defconfig index 05361f76fcb..4ec51af9f2e 100644 --- a/configs/sbc8349_defconfig +++ b/configs/sbc8349_defconfig @@ -67,3 +67,17 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y diff --git a/configs/strider_con_defconfig b/configs/strider_con_defconfig index 196c44470a2..a806e9957f7 100644 --- a/configs/strider_con_defconfig +++ b/configs/strider_con_defconfig @@ -91,3 +91,26 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/strider_con_dp_defconfig b/configs/strider_con_dp_defconfig index c407bed189d..3687a28fc3a 100644 --- a/configs/strider_con_dp_defconfig +++ b/configs/strider_con_dp_defconfig @@ -91,3 +91,26 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/strider_cpu_defconfig b/configs/strider_cpu_defconfig index 1128950ace2..4231a431b88 100644 --- a/configs/strider_cpu_defconfig +++ b/configs/strider_cpu_defconfig @@ -91,3 +91,26 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/strider_cpu_dp_defconfig b/configs/strider_cpu_dp_defconfig index f0b2c44efb1..afb991ce1e2 100644 --- a/configs/strider_cpu_dp_defconfig +++ b/configs/strider_cpu_dp_defconfig @@ -91,3 +91,26 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig index 326662a575c..9c735d03943 100644 --- a/configs/suvd3_defconfig +++ b/configs/suvd3_defconfig @@ -130,3 +130,40 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_UPMA=y +CONFIG_BR2_PORTSIZE_16BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_3=y +CONFIG_OR3_TRLX_RELAXED=y diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index 3316fe91921..45a779a39e2 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -115,3 +115,37 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index 06b2c34dbba..250fe730f48 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -129,3 +129,48 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_2=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_4_CYCLE=y diff --git a/configs/ve8313_defconfig b/configs/ve8313_defconfig index 1df5195e977..365c4ea8587 100644 --- a/configs/ve8313_defconfig +++ b/configs/ve8313_defconfig @@ -95,3 +95,48 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0x61000000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_BCTLD_NOT_ASSERTED=y +CONFIG_OR1_RST_ONE_CLOCK=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="NVRAM" +CONFIG_BR2_OR2_BASE=0x60000000 +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_3=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="SRAM" +CONFIG_BR3_OR3_BASE=0x62000000 +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_MBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y diff --git a/configs/vme8349_defconfig b/configs/vme8349_defconfig index 9336dfac5cb..072674cbeb6 100644 --- a/configs/vme8349_defconfig +++ b/configs/vme8349_defconfig @@ -94,3 +94,24 @@ CONFIG_TSEC_ENET=y CONFIG_BAUDRATE=9600 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF8000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_128_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="WINDOW1" +CONFIG_BR1_OR1_BASE=0xF0000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_32BIT=y +CONFIG_OR1_AM_256_KBYTES=y +CONFIG_OR1_SETA_EXTERNAL=y diff --git a/drivers/mtd/nand/raw/fsl_elbc_spl.c b/drivers/mtd/nand/raw/fsl_elbc_spl.c index 30c3308940e..099d86427c5 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_spl.c +++ b/drivers/mtd/nand/raw/fsl_elbc_spl.c @@ -14,6 +14,10 @@ #include <asm/fsl_lbc.h> #include <nand.h>

+#ifdef CONFIG_MPC83xx +#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h" +#endif + #define WINDOW_SIZE 8192

static void nand_wait(void) diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 185f6490d7c..cd78836bcd5 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -175,9 +175,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -191,9 +188,6 @@ */ #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */ -/* NAND */ -#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) /* 0xFFFF8396 */

#ifdef CONFIG_VSC7385_ENET @@ -201,9 +195,6 @@ /* VSC7385 Base address on CS2 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -/* VSC7385_BASE */ -#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET) /* 0xFFFE09FF */ /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 diff --git a/include/configs/MPC8313ERDB_NAND.h b/include/configs/MPC8313ERDB_NAND.h index 40b0264dbe4..93b553c9050 100644 --- a/include/configs/MPC8313ERDB_NAND.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -219,14 +219,6 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)

-/* NAND */ -#define CONFIG_SYS_BR0_PRELIM (0xE2800000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) - -/* FLASH */ -#define CONFIG_SYS_BR1_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD) - /* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM @@ -235,9 +227,6 @@ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ /* map at 0xFA000000 on LCS3 */ -/* BCSR */ -#define CONFIG_SYS_BR3_PRELIM (0xFA000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* Vitesse 7385 */

@@ -247,9 +236,6 @@ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */

-/* VSC7385 */ -#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#endif

diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h index fd58ed53c20..b7f8e11458c 100644 --- a/include/configs/MPC8313ERDB_NOR.h +++ b/include/configs/MPC8313ERDB_NOR.h @@ -191,14 +191,6 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024)

-/* FLASH*/ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD) - -/* NAND */ -#define CONFIG_SYS_BR1_PRELIM (0xE2800000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR) - /* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM @@ -207,9 +199,6 @@ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ /* map at 0xFA000000 on LCS3 */ -/* BCSR */ -#define CONFIG_SYS_BR3_PRELIM (0xFA000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) /* Vitesse 7385 */

#ifdef CONFIG_VSC7385_ENET @@ -218,9 +207,6 @@ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */

-/* VSC7385 */ -#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#endif

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 97b66415c9b..708829dae80 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -177,13 +177,7 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

-/* NAND */ -#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR)

/* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index fd884a1e654..c66e33a247e 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -142,9 +142,6 @@ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 41b02231352..ed47bcd5b42 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -133,9 +133,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -148,9 +145,6 @@ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */

-/* BCSR */ -#define CONFIG_SYS_BR1_PRELIM (0xF8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* * Windows to access PIB via local bus @@ -163,17 +157,11 @@ * CS2 on Local Bus, to PIB */

-/* PIB1 */ -#define CONFIG_SYS_BR2_PRELIM (0xF8008000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* * CS3 on Local Bus, to PIB */

-/* PIB2 */ -#define CONFIG_SYS_BR3_PRELIM (0xF8010000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* * Serial Port diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 4cda1589b67..3e0907dae4e 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -123,9 +123,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -148,9 +145,6 @@ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */

-/* BCSR */ -#define CONFIG_SYS_BR1_PRELIM (0xE2400000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_SCY_15 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR)

#define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h index 7f906c38d89..e401c29d6b7 100644 --- a/include/configs/MPC8349EMDS_SDRAM.h +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -123,10 +123,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */

@@ -147,10 +143,6 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -/* BCSR */ -#define CONFIG_SYS_BR1_PRELIM (0xE2400000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_SCY_15 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR) - #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ @@ -192,10 +184,6 @@ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 */

-/* SDRAM */ -#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_32 | BR_MS_SDRAM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB | OR_SDRAM_XAM | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) | OR_SDRAM_EAD) - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index e90d497f5ef..cc62fc32135 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -211,9 +211,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * BRx, ORx, LBLAWBARx, and LBLAWARx */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_16MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* Vitesse 7385 */

@@ -221,18 +218,12 @@ boards, we say we have two, but don't display a message if we find only one. */

#ifdef CONFIG_VSC7385_ENET

-/* VSC7385 */ -#define CONFIG_SYS_BR1_PRELIM (0xF8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#endif

#define CONFIG_SYS_LED_BASE 0xF9000000

-/* LED */ -#define CONFIG_SYS_BR2_PRELIM (0xF9000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* Compact Flash */

@@ -240,9 +231,6 @@ boards, we say we have two, but don't display a message if we find only one. */

#define CONFIG_SYS_CF_BASE 0xF0000000

-/* CF */ -#define CONFIG_SYS_BR3_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_UPMA | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_UPM_BI)

#endif

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index e569e63741f..a244ae87a22 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -162,9 +162,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -178,9 +175,6 @@ */ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -/* BCSR */ -#define CONFIG_SYS_BR1_PRELIM (0xF8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* * NAND Flash on the Local Bus @@ -190,9 +184,6 @@

#define CONFIG_SYS_NAND_BASE 0xE0600000

-/* NAND */ -#define CONFIG_SYS_BR3_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_RST | OR_FCM_TRLX | OR_FCM_EHTR)

/* * Serial Port diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index c1898a53a6c..006279a58c3 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -188,9 +188,6 @@

#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -204,9 +201,6 @@ */ #define CONFIG_SYS_NAND_BASE 0xE0600000

-/* NAND */ -#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR)

/* Vitesse 7385 */

@@ -214,9 +208,6 @@

#ifdef CONFIG_VSC7385_ENET

-/* VSC7385 */ -#define CONFIG_SYS_BR2_PRELIM (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#endif

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index c76df2847d2..af03c037865 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -76,9 +76,6 @@

#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0x80000000 | BR_MS_GPCM | BR_PS_32 | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_1GB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET)

/* disable remaining mappings */ #define CONFIG_SYS_BR1_PRELIM 0x00000000 diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h index a7eb5f52953..e9cfeae64d8 100644 --- a/include/configs/caddy2.h +++ b/include/configs/caddy2.h @@ -70,15 +70,9 @@ #define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFFC00000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_4MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_WINDOW1_BASE 0xf0000000

-/* WINDOW1 */ -#define CONFIG_SYS_BR1_PRELIM (0xF0000000 | BR_PS_32 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB | OR_GPCM_SETA)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 3fe72db188c..9318e6252ae 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -169,9 +169,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -185,9 +182,6 @@ #define CONFIG_SYS_FPGA0_BASE 0xE0600000 #define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */

-/* FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_1MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET)

#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE #define CONFIG_SYS_FPGA_DONE(k) 0x0010 diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 12881380e78..1441a3539b5 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -143,9 +143,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 #define CONFIG_SYS_FLASH_SIZE 8

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFF800000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_SCY_10 | OR_GPCM_EHTR_SET | OR_GPCM_TRLX_SET | OR_GPCM_CSNT | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128 @@ -164,9 +161,6 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define NAND_CACHE_PAGES 64

-/* NAND */ -#define CONFIG_SYS_BR1_PRELIM (0xE1000000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_PGS | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_4 | OR_FCM_TRLX | OR_FCM_EHTR | OR_FCM_RST)

/* * MRAM setup @@ -176,9 +170,6 @@

#define CONFIG_SYS_OR_TIMING_MRAM

-/* MRAM */ -#define CONFIG_SYS_BR2_PRELIM (0xE2000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_7 | OR_GPCM_TRLX_SET)

/* * CPLD setup @@ -188,9 +179,6 @@

#define CONFIG_SYS_OR_TIMING_MRAM

-/* CPLD */ -#define CONFIG_SYS_BR3_PRELIM (0xE3000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_SCY_1 | OR_GPCM_TRLX_SET)

/* * HW-Watchdog diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index deef6bac03b..180dd2860a3 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -112,9 +112,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -124,9 +121,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -340,9 +334,6 @@ #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 256

-/* PAXE */ -#define CONFIG_SYS_BR3_PRELIM (0xA0000000 | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * BFTIC3 on the local bus CS4 @@ -350,9 +341,6 @@ #define CONFIG_SYS_BFTIC3_BASE 0xB0000000 #define CONFIG_SYS_BFTIC3_SIZE 256

-/* BFTIC3 */ -#define CONFIG_SYS_BR4_PRELIM (0xB0000000 | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR4_PRELIM (OR_AM_256MB| OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* enable POST tests */ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index ce92418d0bd..96d7435163a 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -97,9 +97,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -109,9 +106,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_64MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -320,8 +314,5 @@ #define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 256

-/* PAXE */ -#define CONFIG_SYS_BR3_PRELIM (0xA0000000 | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#endif /* CONFIG */ diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h index 0715b611e67..0095390fbdd 100644 --- a/include/configs/kmopti2.h +++ b/include/configs/kmopti2.h @@ -117,9 +117,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -129,9 +126,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -355,16 +349,10 @@ * Configuration for C2 on the local bus */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD)

/* * Configuration for C3 on the local bus */

-/* APP2 */ -#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_SCY_4 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR)

#endif /* __CONFIG_H */ diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h index f2f57477ddc..da789f97c18 100644 --- a/include/configs/kmsupx5.h +++ b/include/configs/kmsupx5.h @@ -117,9 +117,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -129,9 +126,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -349,8 +343,5 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD)

#endif /* __CONFIG_H */ diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h index f9f637fb036..0068e4ecc1e 100644 --- a/include/configs/kmtegr1.h +++ b/include/configs/kmtegr1.h @@ -124,9 +124,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -136,9 +133,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -404,9 +398,6 @@ * */

-/* APP2 */ -#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_SCY_5 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR)

/* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h index e0b7a4f3631..51c2b8d8c4e 100644 --- a/include/configs/kmtepr2.h +++ b/include/configs/kmtepr2.h @@ -117,9 +117,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -129,9 +126,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -351,12 +345,6 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD)

-/* APP2 */ -#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_SCY_4 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR)

#endif /* __CONFIG_H */ diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h index 8ac2dc3d8ff..f5ab68b8950 100644 --- a/include/configs/kmvect1.h +++ b/include/configs/kmvect1.h @@ -116,9 +116,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -128,9 +125,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -393,13 +387,7 @@ * */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_16 | BR_MS_UPMA | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB)

-/* APP2 */ -#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_3 | OR_GPCM_TRLX_SET)

#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 31bf9971ab2..cb7dabd9321 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -179,9 +179,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFC000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 64 /* FLASH size is 64M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFC000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_64MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_4 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 @@ -196,18 +193,12 @@ */ #define CONFIG_SYS_SJA1000_BASE 0xFBFF0000

-/* SJA1000 */ -#define CONFIG_SYS_BR1_PRELIM (0xFBFF0000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_SCY_5 | OR_GPCM_EHTR_SET)

/* * CPLD on Local Bus */ #define CONFIG_SYS_CPLD_BASE 0xFBFF8000

-/* CPLD */ -#define CONFIG_SYS_BR2_PRELIM (0xFBFF8000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | OR_GPCM_SCY_4 | OR_GPCM_EHTR_SET)

/* * Serial Port diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 42a1e1682d2..98770ca0a64 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -98,9 +98,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFF800000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ diff --git a/include/configs/strider.h b/include/configs/strider.h index 1519dad3217..dd89ee8c815 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -167,9 +167,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_8MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -183,9 +180,6 @@ #define CONFIG_SYS_FPGA0_BASE 0xE0600000 #define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */

-/* FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE0600000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_1MB | OR_UPM_XAM | OR_GPCM_CSNT | OR_GPCM_SCY_5 | OR_GPCM_TRLX_CLEAR | OR_GPCM_EHTR_CLEAR)

#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE #define CONFIG_SYS_FPGA_DONE(k) 0x0010 diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index 995e60ae666..00e330de9de 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -114,9 +114,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -126,9 +123,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -346,13 +340,7 @@ * */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_16 | BR_MS_UPMA | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB)

-/* APP2 */ -#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_3 | OR_GPCM_TRLX_SET)

#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h index d2cbcb9f334..84fb223a0d2 100644 --- a/include/configs/tuge1.h +++ b/include/configs/tuge1.h @@ -117,9 +117,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -129,9 +126,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -349,8 +343,5 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD)

#endif /* __CONFIG_H */ diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 752b41608bf..2d180ce1e16 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -117,9 +117,6 @@ #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF0000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ @@ -129,9 +126,6 @@ * PRIO1/PIGGY on the local bus CS1 */

-/* KMBEC_FPGA */ -#define CONFIG_SYS_BR1_PRELIM (0xE8000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

/* * Serial Port @@ -351,13 +345,7 @@ * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) */

-/* APP1 */ -#define CONFIG_SYS_BR2_PRELIM (0xA0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR | OR_GPCM_EAD)

-/* APP2 */ -#define CONFIG_SYS_BR3_PRELIM (0xB0000000 | BR_PS_8 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_256MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY_2 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_CLEAR)

#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 3a5bcf9c62f..4c5dad9dc26 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -153,25 +153,13 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_32MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_5 | OR_GPCM_TRLX_SET | OR_GPCM_EAD)

-/* NAND */ -#define CONFIG_SYS_BR1_PRELIM (0x61000000 | BR_PS_8 | BR_DECC_CHK_GEN | BR_MS_FCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_FCM_BCTLD | OR_FCM_CHT | OR_FCM_SCY_2 | OR_FCM_RST | OR_FCM_TRLX)

/* Still needed for spl_minimal.c */ #define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM #define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM

-/* NVRAM */ -#define CONFIG_SYS_BR2_PRELIM (0x60000000 | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_3 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

-/* SRAM */ -#define CONFIG_SYS_BR3_PRELIM (0x62000000 | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

/* * Serial Port diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index dd8aae51173..9b9c1ff54e2 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -70,15 +70,9 @@ #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */

-/* FLASH */ -#define CONFIG_SYS_BR0_PRELIM (0xF8000000 | BR_PS_16 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB | OR_GPCM_XAM | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)

#define CONFIG_SYS_WINDOW1_BASE 0xf0000000

-/* WINDOW1 */ -#define CONFIG_SYS_BR1_PRELIM (0xF0000000 | BR_PS_32 | BR_MS_GPCM | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB | OR_GPCM_SETA)

#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/