-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of rogan@dawes.za.net Sent: Friday, March 18, 2011 1:40 PM To: u-boot@lists.denx.de Subject: [U-Boot] Non-working Relocated DNS323 config
This patch series contains the previous working configuration for the DNS323, forward-ported to mainline, taking into account changes made to the EDMiniV2 configuration on which this is based.
Unfortunately, this does not boot at all. I get:
Marvell>> bootm ## Booting image at 00100000 ... Image Name: UBoot dns323 Image Type: ARM U-Boot Kernel Image (uncompressed) Data Size: 170100 Bytes = 166.1 kB Load Address: 03000000 Entry Point: 03000000 Verifying Checksum ... OK OK
Starting kernel ...
There might be machine id mismatch in the kernel and programmed in u-boot for this board.
Regards.. Prafulla . .
and that is the end of it.
Any hints and suggestions as to what I may be doing wrong are gratefully received.
Regards,
Rogan
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot