When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
Cc: Adam Ford aford173@gmail.com Cc: Vanessa Maegima vanessa.maegima@nxp.com Cc: Otavio Salvador otavio@ossystems.com.br Cc: Igor Opaniuk igor.opaniuk@toradex.com Cc: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Tom Rini trini@konsulko.com --- Changes in v2: - Move actions cubieboard to its own commit, oops.
As an aside, the README files that haven't already been converted to rST should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks! --- board/beacon/imx8mm/README | 2 +- board/logicpd/imx6/README | 2 +- board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +- doc/board/toradex/colibri_imx7.rst | 1 - 4 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/board/beacon/imx8mm/README b/board/beacon/imx8mm/README index 4223fbd15dd6..dce176fa0b23 100644 --- a/board/beacon/imx8mm/README +++ b/board/beacon/imx8mm/README @@ -26,7 +26,7 @@ $ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree) Build U-Boot ============ $ make imx8mm_beacon_defconfig -$ make flash.bin ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000 +$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
Burn U-Boot to microSD Card =========================== diff --git a/board/logicpd/imx6/README b/board/logicpd/imx6/README index 26d053a32c3b..19f79c5734bc 100644 --- a/board/logicpd/imx6/README +++ b/board/logicpd/imx6/README @@ -17,7 +17,7 @@ Building U-Boot for Logic PD Development Kit To build U-Boot for the Dual and Quad variants:
make imx6q_logic_defconfig - make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- + make u-boot.imx CROSS_COMPILE=arm-linux-
Flashing U-Boot into the SD card diff --git a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/board/technexion/pico-imx7d/README.pico-imx7d_BL33 index 40324ffe5f34..1b346093b88d 100644 --- a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 +++ b/board/technexion/pico-imx7d/README.pico-imx7d_BL33 @@ -4,7 +4,7 @@ The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure world in this case.
- Build u-boot - Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm + Set environment variable of CROSS_COMPILE for your toolchain $ make pico-imx7d_bl33_defconfig $ make all
diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst index 6fb952666661..a30e721379ee 100644 --- a/doc/board/toradex/colibri_imx7.rst +++ b/doc/board/toradex/colibri_imx7.rst @@ -18,7 +18,6 @@ Build U-Boot .. code-block:: bash
$ export CROSS_COMPILE=arm-linux-gnueabi- - $ export ARCH=arm $ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig $ make