The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which is the version available on the market. Swap the controller order to match this and future versions of the SoM.
Signed-off-by: Marek Vasut marex@denx.de Cc: Andreas Bießmann andreas.devel@googlemail.com --- board/aries/ma5d4evk/ma5d4evk.c | 5 ++--- include/configs/ma5d4evk.h | 10 +++++----- 2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/board/aries/ma5d4evk/ma5d4evk.c b/board/aries/ma5d4evk/ma5d4evk.c index 9c1ba58166..0293b29d0e 100644 --- a/board/aries/ma5d4evk/ma5d4evk.c +++ b/board/aries/ma5d4evk/ma5d4evk.c @@ -205,14 +205,13 @@ int board_mmc_init(bd_t *bis) at91_set_pio_output(AT91_PIO_PORTE, 15, 1); at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
- ret = atmel_mci_init((void *)ATMEL_BASE_MCI0); + ret = atmel_mci_init((void *)ATMEL_BASE_MCI1); if (ret) /* eMMC init failed, skip it. */ at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
/* Enable the power supply to On-board MicroSD */ at91_set_pio_output(AT91_PIO_PORTE, 17, 0); - - ret = atmel_mci_init((void *)ATMEL_BASE_MCI1); + ret = atmel_mci_init((void *)ATMEL_BASE_MCI0); if (ret) /* uSD init failed, power it down. */ at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h index f317f07d80..f6c883dd70 100644 --- a/include/configs/ma5d4evk.h +++ b/include/configs/ma5d4evk.h @@ -137,9 +137,9 @@ "consdev=ttyS3\0" \ "baudrate=115200\0" \ "bootscript=boot.scr\0" \ - "bootdev=/dev/mmcblk1p1\0" \ - "bootpart=1:1\0" \ - "rootdev=/dev/mmcblk1p2\0" \ + "bootdev=/dev/mmcblk0p1\0" \ + "bootpart=0:1\0" \ + "rootdev=/dev/mmcblk0p2\0" \ "netdev=eth0\0" \ "dfu_alt_info=mmc raw 0 3867148288\0" \ "kernel_addr_r=0x22000000\0" \ @@ -196,8 +196,8 @@ "bootm ${kernel_addr_r}\0" \ "try_bootscript=" \ "mmc rescan;" \ - "if test -e mmc ${bootpart} ${bootscript} ; then " \ - "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\ + "if test -e mmc 1:1 ${bootscript} ; then " \ + "if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \ "then ; " \ "echo Running bootscript... ; " \ "source ${kernel_addr_r} ; " \