On 26 August 2015 at 19:29, Marek Vasut marex@denx.de wrote:
On Wednesday, August 26, 2015 at 03:47:28 PM, Jagan Teki wrote:
On 26 August 2015 at 13:00, Chin Liang See clsee@altera.com wrote:
On Wed, 2015-08-26 at 08:57 +0200, marex@denx.de wrote:
On Wednesday, August 26, 2015 at 02:09:55 AM, Chin Liang See wrote:
Enable the quad output fast read and quad input fast program support. Quad mode is supported by Cadence QSPI controller.
Signed-off-by: Chin Liang See clsee@altera.com Cc: Dinh Nguyen dinguyen@opensource.altera.com Cc: Stefan Roese sr@denx.de Cc: Vikas Manocha vikas.manocha@st.com Cc: Jagannadh Teki jteki@openedev.com Cc: Pavel Machek pavel@denx.de Cc: Marek Vasut marex@denx.de
drivers/spi/cadence_qspi.c | 11 +++++++++++ drivers/spi/cadence_qspi_apb.c | 16 ++++++++++++---- 2 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index 34a0f46..c6b69c4 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -318,6 +318,16 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus) return 0;
}
+static int cadence_spi_child_pre_probe(struct udevice *dev) +{
- struct spi_slave *slave = dev_get_parentdata(dev);
- /* Cadence QSPI controller can support quad read and program */
- slave->op_mode_rx = SPI_OPM_RX_QOF;
- slave->op_mode_tx = SPI_OPM_TX_QPP;
- return 0;
+}
static const struct dm_spi_ops cadence_spi_ops = {
.xfer = cadence_spi_xfer, .set_speed = cadence_spi_set_speed,@@ -341,5 +351,6 @@ U_BOOT_DRIVER(cadence_spi) = {
.ofdata_to_platdata = cadence_spi_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct cadence_spi_platdata), .priv_auto_alloc_size = sizeof(struct cadence_spi_priv),
.child_pre_probe = cadence_spi_child_pre_probe,
.probe = cadence_spi_probe,
};
Simon, can you please check if this DM bit is correct ?
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index d053407..deffb6b 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -29,6 +29,9 @@
#include <asm/io.h> #include <asm/errno.h> #include "cadence_qspi.h"
+#include <spi.h> +#include <spi_flash.h> +#include "../mtd/spi/sf_internal.h"
Why do you need this include ?
Actually I am comparing the opcode to determine whether its a quad command. If yes, we need to setup the controller accordingly.
Sorry, this I wouldn't recommend as of now please assign quad directly instead setting up controller based on the flash stuff, Yes things need to change it on u-boot like spi-nor framework and currently we are working on it[1] will defiantly back with proper solution.
[1] http://git.denx.de/?p=u-boot/u-boot-spi.git;a=shortlog;h=refs/heads/spi-no r
Is this stuff in any way compatible with the spi-nor stuff in Linux ?
Main intention is to compatible with Linux spi-nor, but instead of direct porting - this way is to make enhancements step by step.
thanks!