Re: [U-Boot-Users] DB1000 Little-Endian U-Boot

I guess you have changed TEXT_BASE to 0xbec00000?

When you use the S8 switch, you swap the two boot flashes.

This means that the boot flash that was at 0xbec00000 now appears at 0xbfc00000.

So, you have to compile u-boot with TEXT_BASE at 0xbfc00000 to make this work.

/Thomas

Charles Eidsness wrote:

Hi All,

I would like to use u-boot on my DB1000 card (with an AMD Au1000 processor) in little endian mode. After a little bit of playing around I have gotten it to compile, load in to the parameter FLASH and run from the Yamon prompt, i.e. go bec00000. But, when I switch to boot completely from u-boot in the parameter flash (switch S8) the card just hangs. Does anyone have any ideas?

Thanks, Charles